기계 상태진단을 위한 인-라인형 오일 모니터링 스마트 센서
In-line Smart Oil Sensor for Machine Condition Monitoring
0
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
An integrated in-line oil monitoring detector assigned for continuous in situ monitoring multiple parameters of oil performance for predicting economically optimal oil change intervals and equipment condition control is presented in this study. The detector estimates oil deterioration based on the information about chemical degradation, total contamination, water content of oil and oil temperature. The oil oxidation is estimated by “chromatic ratio”, total contamination is measured by the changes in optical intensity of oil in three optical wavebands (“Red”, “Green” and “Blue”) and water content is evaluated as Relative Saturation of oil by water. The detector is able to monitor oils with low light absorption (hydraulic, transformer, turbine, compressor and etc. oils as well as oils with rather high light absorption in visible waveband (diesel and etc. oils). In a case study that the detector is applied to a diesel engine oil, it is found that the detector provides good results on oil chemical degradation as well as soot concentration
Abstract
An integrated in-line oil monitoring detector assigned for continuous in situ monitoring multiple parameters of oil performance for predicting economically optimal oil change intervals and equipment condition control is presented in this study. The detector estimates oil deterioration based on the information about chemical degradation, total contamination, water content of oil and oil temperature. The oil oxidation is estimated by “chromatic ratio”, total contamination is measured by the changes in optical intensity of oil in three optical wavebands (“Red”, “Green” and “Blue”) and water content is evaluated as Relative Saturation of oil by water. The detector is able to monitor oils with low light absorption (hydraulic, transformer, turbine, compressor and etc. oils as well as oils with rather high light absorption in visible waveband (diesel and etc. oils). In a case study that the detector is applied to a diesel engine oil, it is found that the detector provides good results on oil chemical degradation as well as soot concentration
참고문헌 (20)
- Kwon, Oh Kwan, "On-line measurement of contaminant level in lubricating oil", US Pat. No.6151108 Nov.21, 2000, ~ (2000)
- Kumar,S., "Online Condition Monitoring of Engine Oil", Industrial Lubrication and Tribology, 57(6), pp.260~267 (2005)
- Turner,J.D., "Electrical Technique for Online Condition Monitoring", Measurement Science and Technology, 14(10), pp.1794~1800 (2003)
- "Condition Monitoring and Diagnostics of Machine - Tribology-Based Monitoring and Diagnostics-, Part 1: General Guidelines", ISO, 2001
- Hidekazu TAI, "Vibration-type Viscometer Using a Triangular Bimorph Transducer-measurement of High Viscosity by Low-frequency Operation-", Japanese Journal of Applied Physics, 43(5B), pp.3088~3089 (2004)
- KEREM DURDAG, "Real-time Viscosity Measurement for Condition-based Monitoring Using Solid-state Viscosity Sensor", Tribology Transactions, 51, pp.296~302 (2008)
- SKF, "New Life Handbook", ~ (1989)
- "WS04 Portable water sensor"[URL]
- 공호성, "분광분석법을 이용한 윤활유 오염물 및 마모입자 분석에 있어서의 문제점 고찰", 한국윤활학회, 15(2) (1999)
- 이대성, "마이크로 스마트 센서의 기술개요", pp.8~15 (2006), C&I
- "오일 열화 실시간 모니터링 방법 및 장치", 대한민 국 특허출원 2006-0070869 (2006), USA patent application No. 11, 2006
- 공호성, "오일 열화 진행에 따른 오일의 색채 특성 변화", 한국윤활학회지, 24(1), pp.7~13 (2008), 한국윤활학회
- Ossia,C.V., "On the Use of Intrinsic Fluorescence Emission Ratio in the Characterization of Hydraulic Oil Degradation", Tribology International, 41, pp.103~110 (2008)
- Ossia, C.V., "Chromatic Parameters in the Condition Monitoring of Synthetic Hydraulic Oils", KSTLE International Journal, 8(1), pp.1~6 (2007)
- 조성용, "디젤 엔진오일 내 Soot 함량 증가에 따른 오염도 측정에 관한 실험적 고찰", 한국윤활학회지, 19(5), pp.251~258 (2003), 한국윤활학회