MPCE copolymer와 습식 폴리우레탄의 블렌드에 의한 투습방수 나일론 직물의 제반 물성변화에 관한 연구
Property Evaluation of Breathable Blend Fabric of MPCE Copolymer and Wet Coagulated Polyurethane
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The phospholipid-based MPCE(2-Methacryloxyethyl Phosphoryl Chlorine) copolymer was mixed with wet polyurethane for coating of nylon fabrics. The substitution rate of water in coagulation bath with DMF was changed under control of the size of formed hydrophilic microporous cell enable to manufacture excellent breathable, anti-bacterial and moisture control fabrics. Biocompatible property, vapor permeability, hydrostatic pressure, moisture management and anti-bacterial property were investigated for treated nylon fabrics. In result, increased moisture transmission rates, decreased water resistance and outstanding moisture control property could be confirmed by enhanced hydrophilicity of wet-coated nylon fabric with MPCE copolymer.
Abstract
The phospholipid-based MPCE(2-Methacryloxyethyl Phosphoryl Chlorine) copolymer was mixed with wet polyurethane for coating of nylon fabrics. The substitution rate of water in coagulation bath with DMF was changed under control of the size of formed hydrophilic microporous cell enable to manufacture excellent breathable, anti-bacterial and moisture control fabrics. Biocompatible property, vapor permeability, hydrostatic pressure, moisture management and anti-bacterial property were investigated for treated nylon fabrics. In result, increased moisture transmission rates, decreased water resistance and outstanding moisture control property could be confirmed by enhanced hydrophilicity of wet-coated nylon fabric with MPCE copolymer.
참고문헌 (17)
- The Polyurethane Society of Korea, "PU Science and Technology", pp.186~199 (2006), Guduk Publishing
- J. E. Browne, "Preparation of Phospholipid Analogues using the Phosphoramidite Route", J. Chem Soc, 1, pp.653~ (2000)
- S. D. Stamatov, "Synthesis of DL-α-tocopherol-ligated Phospholipids", Chemistry and Physics of Lipids, 91, pp.12~ (1998)
- K. Ishihara, "Preparation of Phospholipid Polymers and Their Properties as Polymer Hydrogel Membranes", J. Polymer, 20(5), pp.355~ (1990)
- A. Z. Zhu, "Preparation and Blood Compatibility of Phosphorylcholinebonded O-butyrylchitosan", Polym Int, 52, pp.81~ (2003)
- Y. H. Ma, "Well-Defined Biocompatible Block Copolymers via Atom Transfer Radical Polymerization of 2-Methacryloyloxyethyl Phosphorylcholine in Protic Media", Macromolecules, 36, pp.3475~ (2003)
- A. B. Lowe, "Synthesis and Solution Properties of Zwitterionic Polymers", Chem. Rev, 102, pp.4177~ (2002)
- A. L. Lewis, "Phosphorylcholine-based Polymers and Their Use in the Prevention of Biofouling", Colloids and Surfaces B, 18, pp.261~ (2000)
- K. H. Chae, "Anti-fouling Epoxy Coatings for Optical Biosensor Application based on Phosphorylcholine", Sensors and Actuators B, 124, pp.153~ (2007)
- 홍영기, "코로나 방전에 의한 방진", 의료용 마스크 여과재의 기능화 가공, 2013, pp.25(3), 232~239[DOI]
- 황지현, "플루오르알킬화에 의한 친수성 폴리우레탄 필름 표면의 개질", 한국염색가공학회지, 25(1), pp.30~36 (2013), 한국염색가공학회
- 고영일, "Synthesis of New Phospholipid Biocompatible Textile Finishing Agent", 한국염색가공학회지, 22(4), pp.293~299 (2010), 한국염색가공학회
- FITI, "Testing Guide on Functionality Apparel Products", FITI Testing and Research Institute, ~ (2012)
- D. Horak, "The Use of Poly(2-hydroxyethyl methacrylate)in Medicine", Chemicke Listy, 86(9), pp.681~ (1992)
- T. R. Burrow, "Wound Dressings, GB Patent 2288736", ~ (1995)
- X. Z. Zhang, "Chung, Effect of Mixed Solvents on Characteristics of Poly(N-isopropylacrylamide gels)", Langmuir, 18, pp.2538~ (2002)
- R. A. Stile, "Synthesis and Characterization of Injectable Poly (N-isopropylacrylamide)-based Hydrogels that Support Tissue Formation in Vitro", Macromolecules, 32, pp.7370~ (1999)