강한 측력이 작용하는 피스톤 펌프의 왕복동 피스톤기구 부에서의 윤활모형에 관한 연구
Lubrication Modeling of Reciprocating Piston in Piston Pump with High Lateral Load
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The objective of this study is to model and simulate the nonlinear lubrication performance of the slidingpart between the piston and cylinder wall in a hydrostatic swash-plate-type axial piston pump. A numericalalgorithm is developed that facilitates simultaneous calculation of the rotating body motion and fluid film pressureto observe the fluid film geometry and power loss. It is assumed that solid asperity contact, so-called mixedlubrication in this study, invariably occurs in the swash-plate-type axial piston pump, which produces a higherlateral moment on the pistons than other types of hydrostatic machines. Two comparative mixed lubrication models,rigid and elastic, are used to determine the reaction force and sliding friction. The rigid model does not allowany elastic deformation in the partial lubrication area. The patch shapes, reactive forces, and virtual local elasticdeformation in the partial lubrication area are obtained in the elastic contact model using a simple Hertz contacttheory. The calculation results show that a higher reaction force and friction loss are obtained in the rigid model,indicating that solid deformation is a significant factor on the lubrication characteristics of the reciprocating pistonpart.
Abstract
The objective of this study is to model and simulate the nonlinear lubrication performance of the slidingpart between the piston and cylinder wall in a hydrostatic swash-plate-type axial piston pump. A numericalalgorithm is developed that facilitates simultaneous calculation of the rotating body motion and fluid film pressureto observe the fluid film geometry and power loss. It is assumed that solid asperity contact, so-called mixedlubrication in this study, invariably occurs in the swash-plate-type axial piston pump, which produces a higherlateral moment on the pistons than other types of hydrostatic machines. Two comparative mixed lubrication models,rigid and elastic, are used to determine the reaction force and sliding friction. The rigid model does not allowany elastic deformation in the partial lubrication area. The patch shapes, reactive forces, and virtual local elasticdeformation in the partial lubrication area are obtained in the elastic contact model using a simple Hertz contacttheory. The calculation results show that a higher reaction force and friction loss are obtained in the rigid model,indicating that solid deformation is a significant factor on the lubrication characteristics of the reciprocating pistonpart.
참고문헌 (8)
- 김경웅, "표면가공무늬가 사판식 액셜 피스톤펌프의 밸브부 윤활특성에 미치는 영향에 관한 연구", 한국윤활학회지, 28(1), pp.12~18 (2012), 한국윤활학회
- Fang, Y, "Mixed Lubrication Characteristics Between the Piston and Cylinder in Hydraulic Piston Pump-Motor", J. Tribol, 117, pp.80~85 (1995)
- Park, T. J, "Analysis of Hydrodynamic Lateral Forces Acting on Grooved Piustons in Hydaulic Piston Pumps", J. Korean Soc. Tribol. Lubr. Eng, 8(2), pp.44~49 (1992)
- Lee, C. O, "Effect of Piston Shape on the Lubrication Characteristics of Hydraulic Piston Pump and Motor", J. Korean Soc. Tribol. Lubr. Eng, 10(3), pp.47~53 (1994)
- Yamaguchi, A, "Motion of the Piston in Piston Pumps and Motors - Theoretical Discussion in Relation to Solid Contact Force and Power Loss", Int. J. JSME, Series B, 43(2), pp.213~218 (2000)
- Pelosi, M, "A Geometric Multigrid Solver for the Piston-Cylinder Interface of Axial Piston Machines", Tribol. Trans, 5(2), pp.163~174 (2012)
- Wieczorek U, "Computer Aided Optimization of Bearing and Sealing Gaps in Hydrostatic Machines – The Simulation Tool CASPAR", Int. J. Fluid Power, 10(2), pp.29~43 (2002)
- Hamrock, B. J, "Fundamental of Fluid Film Lubrication" (1994), McGraw-Hill Inc