자동차용 마찰재의 연마재가 마찰특성에 미치는 영향
The Effect of Abrasive Particles on the Frictional Properties of Automotive Brake Friction Materials
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The frictional properties of automotive brake pads with four different ceramic materials such as magnesia, hematite, alumina, and zircon were investigated. A Krauss type friction tester using gray iron disks was used to examine the friction coefficient, intensity of friction force oscillation, and the tribo-surfaces. Results showed that the friction coefficient increased as the hardness of abrasives increases. Friction oscillation was also increased with hardness of the abrasives. However, the friction materials containing less abrasive particles produced stable friction films on the sliding surface. The transition between two-body and three body abrasion during sliding also played a crucial role in destructing the friction film on the pad surface and in determining various frictional properties.
Abstract
The frictional properties of automotive brake pads with four different ceramic materials such as magnesia, hematite, alumina, and zircon were investigated. A Krauss type friction tester using gray iron disks was used to examine the friction coefficient, intensity of friction force oscillation, and the tribo-surfaces. Results showed that the friction coefficient increased as the hardness of abrasives increases. Friction oscillation was also increased with hardness of the abrasives. However, the friction materials containing less abrasive particles produced stable friction films on the sliding surface. The transition between two-body and three body abrasion during sliding also played a crucial role in destructing the friction film on the pad surface and in determining various frictional properties.
참고문헌 (10)
- Jang, H, "The Effect of Antimony Trisulfide and Zirconium Silicate in the Automotive Brake Friction Material on Friction Characteristics", Wear, 239, pp.229~236 (2000)
- Ma, T, "Effects of ZrSio4 in Non-metallic Brake Friction Materials on Friction Performance", Tribol. Int, 41, pp.166~167 (2008)
- A Study of the Relationship Between Transfer Film Chemistry and Friction Performance in Automotive Braking Systems, SAE Technical Paper, "Wirth, A", ~ (1992)
- Chan. D, "Review of Automotive Brake Friction Materials", Proc. Inst. Mech. Eng. Part D-J. Automob. Eng, 218, pp.57~64 (2003)
- Cho, M. H, "Effects of Ingredients on Tribological Characteristics of a Brake Lining an Experimental Case Study", Wear, 258, pp.1682~1687 (2005)
- The Effect of the Composition and Microstructure of Gray Cast Iron on Preferential Wear During Parasitic Drag and on Intrinsic Damping Capacity, "Jang, H", ~, pp.SAE technical paper, 2003-01-3313 (2003)
- Cho, K. H, "The Size Effect of Zircon Particles on the Friction Characteristics of Brake Lining Materials", Wear, 264, pp.291~297 (2008)
- Gahlin, R, "The Particle Size Effect in Abrasion Studied by Controlled Abrasive Surfaces", Wear, 224, pp.128~135 (1999)
- Pellegrin, D. V. D, "Simulation of Three-dimensional Abrasive Particles", Wear, 258, pp.208~216 (2005)
- Eriksson, M, "Tribological Surfaces of Organic Brake Pads", Tribology International, 33, pp.817~827 (2000)