헥사메텔렌 디아민이 EVA/Itaconated EPDM 블렌드 발포체의 물성 및 접착강도에 미치는 영향 (I)
Effect of 1,6-Hexamethylenediamine Content on the Properties/Adhesive Strength of EVA/Itaconated EPDM Blend Foams (I)
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Simplification of the manufacturing process in shoe making is essential to improve productivity and reduce production costs. To improve the adhesion of EVA foam used as a midsole, EVA/itaconated EPDM(EPDM-g-IA)(80/20wt%) blend was prepared using Torque Rheometer-Plasti-Corder, and 1,6-hexamethylenediamine/crosslinking agent/foaming agent/additive were mixed, followed by amidation reaction and foaming to prepare EVA/EPDM-g-IA foam for shoe midsole. In this study, we investigate the effect of the content of 1,6-hexamethylenediamine(0, 0.5, 1.0, 2.0, 3.0) on the mechanical properties, water-contact angle and adhesion of EVA/itaconated EPDM foam. As the content of 1,6-hexamethylenediamine increased, mechanical properties such as tensile strength, tear strength, tensile elastic modulus, hardness, and water-contact angle were lowered, but elongation at break and compression set(%) were increased. Both normal type and non-UV type adhesive strength increased with increasing diamine content. In particular, it was found that the adhesion strength of the non-UV type adhesion increased sharply with increasing diamine content. As a result, an adherend rupture occurs in a foam sample having a content of 1,6-hexamethylenediamine of 3phr. From this, it can be seen that the EVA/itaconated EPDM foam for shoe midsoles, which can be used for non-UV adhesion without primer and UV treatments, have been developed.
Abstract
Simplification of the manufacturing process in shoe making is essential to improve productivity and reduce production costs. To improve the adhesion of EVA foam used as a midsole, EVA/itaconated EPDM(EPDM-g-IA)(80/20wt%) blend was prepared using Torque Rheometer-Plasti-Corder, and 1,6-hexamethylenediamine/crosslinking agent/foaming agent/additive were mixed, followed by amidation reaction and foaming to prepare EVA/EPDM-g-IA foam for shoe midsole. In this study, we investigate the effect of the content of 1,6-hexamethylenediamine(0, 0.5, 1.0, 2.0, 3.0) on the mechanical properties, water-contact angle and adhesion of EVA/itaconated EPDM foam. As the content of 1,6-hexamethylenediamine increased, mechanical properties such as tensile strength, tear strength, tensile elastic modulus, hardness, and water-contact angle were lowered, but elongation at break and compression set(%) were increased. Both normal type and non-UV type adhesive strength increased with increasing diamine content. In particular, it was found that the adhesion strength of the non-UV type adhesion increased sharply with increasing diamine content. As a result, an adherend rupture occurs in a foam sample having a content of 1,6-hexamethylenediamine of 3phr. From this, it can be seen that the EVA/itaconated EPDM foam for shoe midsoles, which can be used for non-UV adhesion without primer and UV treatments, have been developed.
참고문헌 (14)
- M. Sato, "Mechanism of Crosslink Formation of Ethylene-Vinyl Acetate Copolymer with DCP", The Society of Rubber Science and Technology, 43(9), pp.753~ (1970)
- M. A. R. Perez, "Crosslinked Polyolefin Foams: Production, Structure, Properties, and Applications", Advanced Polymer Science, 184, pp.97~ (2005)
- S. Mishra, "Studies on Dynamic and Static Crosslinking of Ethylene Vinyl Acetate and Ethylene Propylene Diene Tercopolymer Blends", J. of Applied Polymer Science, 74, pp.2756~ (1999)[DOI]
- Y. W. Chang, "Effect of Supramolecular Hydrogen Bonded Network on the Properties of Maleated Ethylene Propylene Diene Rubber", Maleated High Density Polyethylene Blend Based Thermoplasticelastomer, 2006, pp.60, 3118~
- C. C. Park, "The Effect of Low Temperature Plasma on the Contact Angle of EVA Foam", Applied Chemistry, 4(1), pp.53~ (2000)
- C. C. Park, "The Effect of Low Temperature Plasma Treatment Condition on the Peel Strength of EVA Foam for Shoe Mid-sole", Elastomer, 35(4), pp.296~ (2000)
- 박희련, "플라즈마를 이용한 고분자물질의 표면처리에 관한 연구", 한국안전학회지, 20(1), pp.94~100 (2005), 한국안전학회
- M. A. J. Vandermee, "Thermoreversible Crosslinking of Maleated Ethylene", Propylene Rubber Using Ionic Interactions, Hydrogen Bonding and Combination Thereof, 2008, pp.81(1), 96~
- S. Datta, "Ionic Thermoplastic Elastomer Based on Maleated EPDM Rubber I, Effect of Zinc Stearate", J. of Applied Polymer Science, 61, pp.177~ (1996)[DOI]
- A. J. Ostenbrink, "Maleic Anhydride Grafting on EPDM Rubber in the Melt", Polymer, 33(14), pp.3086~ (1992)[DOI]
- J. S. Kim, "Preparation and Properties of High-performance Recyclable Ethylene Propylene Diene Rubber", J. of Applied Polymer Science, 132, pp.42718~ (2015)
- J. W. Bae, "Mechanical Properties and Recyclability of Ionic Thermoplastic Rubber Based on Citraconated Ethylene propylene Diene Monomer", Asian J. of Chemistry, 25(9), pp.5272~ (2013)
- 김정수, "Melt Grafting of Citraconic Acid onto an Ethylene-Propylene-Diene Terpolymer (EPDM) -Effect of Reaction Conditions and Initiator Type on the Melt Grafting of Citraconic Acid onto EPDM-", 엘라스토머 및 콤포지트, 48(1), pp.39~45 (2013), 한국고무학회
- 김기재, "Ethylene-propylene-diene terpolymer (EPDM)와 itaconic acid의 melt grafting: 반응조건과 개시제 종류 및 농도의 영향", 엘라스토머 및 콤포지트, 49(3), pp.181~190 (2014), 한국고무학회