비선형 회귀분석에 의한 엔드밀 가공조건에 따른 Al7075의 표면정도 예측
Prediction of Surface Roughness of Al7075 on End-Milling Working Conditions by Non-linear Regression Analysis
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Recently, the End-milling processing is needed the high-precise technique to get a good surface roughness and rapid time in manufacturing of precision machine parts and electronic parts. The optimum surface roughness has an effect on end-milling working condition such as, cutting direction, spindle speed, feed rate and depth of cut, and so on. It needs to form the correlation of working conditions and surface roughness. Therefore this study was carried out to presume of surface roughness on end-milling working condition of Al7075 by regression analysis. The results was shown that the coefficient of determination(R2) of regression equation had a fine reliability of 87.5% and nonlinear regression equation of surface rough was made by multiple regression analysis.
Abstract
Recently, the End-milling processing is needed the high-precise technique to get a good surface roughness and rapid time in manufacturing of precision machine parts and electronic parts. The optimum surface roughness has an effect on end-milling working condition such as, cutting direction, spindle speed, feed rate and depth of cut, and so on. It needs to form the correlation of working conditions and surface roughness. Therefore this study was carried out to presume of surface roughness on end-milling working condition of Al7075 by regression analysis. The results was shown that the coefficient of determination(R2) of regression equation had a fine reliability of 87.5% and nonlinear regression equation of surface rough was made by multiple regression analysis.
참고문헌 (8)
- Sakuma. K, "Study on Deep Hole Drilling with Solid Boring Tools,The Effect of Tool Material on the Cutting Performance", Bulletin of the JSME, 21(153), pp.532~539 (1978)
- 윤재웅, "선삭가공에서 절삭력을 이용한 공구마멸의 감지", 한국생산제조시스템학회지, 10(1), pp.1~9 (2001), 한국생산제조시스템학회
- Henriksen, E. K, "Chip Breaking-A Study of Three Dimensional Chop Flow", ASME, 9, pp.53~59 (1994)
- Nakamura S, "High-Speed Spindles for Machine Tools", Int, J. Japan Soc. Prec. Eng, 30(4), pp.291~294 (1996)
- Brown M. B, "Order Statistics and Their Uses in Testing and Estimation", Journal of the American Statistical Association, 69, pp.364~367 (1974)
- Park S.H, "Modern design of experiment", Minyung Co, ~ (2002)
- Draper N. R, "Applied Regression Analysis", pp.28~45 (1966), John Wiley & Sons, Inc
- Seber G. A. F, "Linear Regression Analysis", pp.35~89 (1977), John Wiley & Sons,Inc