자기장에 따른 자기유변탄성체의 스틱 슬립 현상 연구
Stick-slip Characteristics of Magnetorheological Elastomer under Magnetic Fields
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper investigates the stick-slip characteristic of magnetorheological elastomer (MRE) between an aluminum plate and the surface of the MRE. MRE is a smart material and it can change its mechanical behavior with the interior iron particles under the influence of an applied magnetic field. Stick-slip is a movement of two surfaces relative to each other that proceeds as a series of jerks caused by alternate sticking from friction and sliding when the friction is overcome by an applied force. This special tribology phenomenon can lead to unnecessary wear, vibration, noise, and reduced service life of work piece. The stick-slip phenomenon is avoided as far as possible in the field of mechanical engineering. As this phenomenon is a function of material property,applied load, and velocity, it can be controlled using the characteristics of MRE. MRE as a soft smart material, whose mechanical properties such as modulus and stiffness can be changed via the strength of an external magnetic field, has been widely studied as a prospective replacement for general rubber in the mechanical domain. In this study, friction force is measured under different loads, speed, and magnetic field strength. From the test results, it is confirmed that the stick-slip phenomenon can be minimized under optimum conditions and can be applied in various mechanical components.
Abstract
This paper investigates the stick-slip characteristic of magnetorheological elastomer (MRE) between an aluminum plate and the surface of the MRE. MRE is a smart material and it can change its mechanical behavior with the interior iron particles under the influence of an applied magnetic field. Stick-slip is a movement of two surfaces relative to each other that proceeds as a series of jerks caused by alternate sticking from friction and sliding when the friction is overcome by an applied force. This special tribology phenomenon can lead to unnecessary wear, vibration, noise, and reduced service life of work piece. The stick-slip phenomenon is avoided as far as possible in the field of mechanical engineering. As this phenomenon is a function of material property,applied load, and velocity, it can be controlled using the characteristics of MRE. MRE as a soft smart material, whose mechanical properties such as modulus and stiffness can be changed via the strength of an external magnetic field, has been widely studied as a prospective replacement for general rubber in the mechanical domain. In this study, friction force is measured under different loads, speed, and magnetic field strength. From the test results, it is confirmed that the stick-slip phenomenon can be minimized under optimum conditions and can be applied in various mechanical components.
참고문헌 (15)
- Maegawa, S., "Mechanism of stick-slip associated with Schallamach waves", WEAR, 268, pp.924~930 (2010)
- Lee, D. W., "A Study on the Tribological Characteristics of a Magneto-Rheological Elastomer", Trans. ASME, J. Tribol, 135, pp.014501~014501 (2013)
- Deng, H. X., "Application of magnetorheological elastomer to vibration absorber", Community Nonlinear Sci. Numer. Simul, 13(9), pp.1938~1947 (2008)
- Shen, Y., "Experimental Research and Modeling of Magnetorheological Elastomers", J. Intell. Mater. Syst. Struct, 15(1), pp.27~35 (2004)
- Danas, K., "Experiments and modeling of iron-particle-filled magnetorheological elastomers", J. Mech. Phys. Solids, 60(1), pp.120~138 (2012)
- Wang, Y. F., "Study on the Mechanical Properties of Magnetorheological Elastomers", Adv. Mater. Res., (774), pp.54~57 (2013)
- Shen, Y., "Experimental Research and Modeling of Magnetorheological Elastomers", J. Intell. Mater. Syst. Struct, 15(1), pp.27~35 (2004)
- Liao, G., "Development of a Real-time Tunable Stiffness and Damping Vibration Isolator Based on Magnetorheological Elastomer", J. Intell. Mater. Syst. Struct, 23(1), pp.25~33 (2012)
- Yeh, J. -Y., "Vibration Analysis of Sandwich Rectangular Plates with Magnetorheological Elastomer Damping Treatment", Smart Mater. Struct, 22(3), pp.035010~ (2013)
- Liao, G., "Development of a Real-time Tunable Stiffness and Damping Vibration Isolator Based on Magnetorheological Elastomer", J. Intell. Mater. Syst. Struct, 23(1), pp.25~33 (2012)
- Kumbhar, S., "Development and Characterization of Isotropic Magnetorheological Elastomer", Univers. J. Mech. Eng. (2013)
- Lee, D. W., "A study of tribologic al characteristics in Magneto-rheological elastomer", Proc. of The 52nd Korean Soc. of Tribol. and Lubr. Eng, pp.23~24 (2011)
- 이철희, "자기유변탄성체의 마찰제어적용 연구", 한국윤활학회지, 28(3), pp.107~111 (2012), 한국윤활학회
- 연성룡, "향상된 폴리우레탄 기반 자기유변탄성체의 마찰 마모 특성연구", 한국윤활학회지, 28(6), pp.333~339 (2012), 한국윤활학회[DOI]
- Lee, D. W., "Stick-slip Characteristics in Magneto-Rheological Elastomer", Proc. Fall Conference of the Korean Society of Tribologists and Lubrication Engineers (2011)