DLC와 PTFE표면코팅에 따른 자기유변유체의 마찰 마모 특성
Friction and wear Characteristics of Magneto-rheological Fluid Depend on Surface Coated by DLC and PTFE
0
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
A magnetorheological (MR) fluid is a smart material whose rheological behavior can be controlled by varying the parameters of the applied magnetic field. Because the damping force and shear force of an MR fluid can be controlled using a magnetic field, it is widely employed in many industrial applications, such as in vehicle vibration control, powertrains, high-precision grinding processes, valves, and seals. However, the characteristics of friction caused by iron particles inside the MR fluid need to be understood and improved so that it can be used in practical applications. Surface process technologies such as polytetrafluoroethylene (PTFE) coatings and diamond-like carbon (DLC) coatings are widely used to improve the surface friction properties. This study examines the friction characteristics of an MR fluid with different surface process technologies such as PTFE coatings and DLC coatings, by using a reciprocating friction tester. The coefficients of friction are in the following descending order: MR fluid without any coating, MR fluid with a DLC coating, and MR fluid with a PTFE coating. Scanning electron microscopy is used to observe the worn surfaces before and after the experiment. In addition, energy dispersive X-ray spectroscopy is used to analyze the chemical composition of the worn surface. Through a comparison of the results, the friction characteristics of the MR fluid based on the different coating technologies are analyzed.
Abstract
A magnetorheological (MR) fluid is a smart material whose rheological behavior can be controlled by varying the parameters of the applied magnetic field. Because the damping force and shear force of an MR fluid can be controlled using a magnetic field, it is widely employed in many industrial applications, such as in vehicle vibration control, powertrains, high-precision grinding processes, valves, and seals. However, the characteristics of friction caused by iron particles inside the MR fluid need to be understood and improved so that it can be used in practical applications. Surface process technologies such as polytetrafluoroethylene (PTFE) coatings and diamond-like carbon (DLC) coatings are widely used to improve the surface friction properties. This study examines the friction characteristics of an MR fluid with different surface process technologies such as PTFE coatings and DLC coatings, by using a reciprocating friction tester. The coefficients of friction are in the following descending order: MR fluid without any coating, MR fluid with a DLC coating, and MR fluid with a PTFE coating. Scanning electron microscopy is used to observe the worn surfaces before and after the experiment. In addition, energy dispersive X-ray spectroscopy is used to analyze the chemical composition of the worn surface. Through a comparison of the results, the friction characteristics of the MR fluid based on the different coating technologies are analyzed.
참고문헌 (18)
- Qiu, H. Z., "Friction Properties of Carbonyl Iron-based magnetorheological fluid", Tribology, 29, pp.61~67 (2009)
- Bossisa, G., "Magnetorheological fluids", Journal of Magnetism and Magnetic Materials, 252, pp.224~228 (2002)
- Furst, E. M., "Micromechanics of Magnetorheological Suspensions", Physical Review E., 61, pp.6732~6739 (2000)
- Huang, J., "Analysis and Design of Cylindrical Magneto-Rheological Fluid Brake", Journal of Materials Processing Technology, 129, pp.559~562 (2002)
- Podgomik, B., "DLC coating of boundary lubricated components-advantages of coating one of the contact surfaces rather than both or none", Tribology International, 36, pp.843~849 (2003)
- W. H. Li, "The effect of friction on magnetorheological fluids", The Korea-Australia Rheology Journal, 20(2), pp.45~50 (2008), 한국유변학회
- Jia, Z. F., "Friction and wear behavior of diamond-like carbon coating on plasmanitrided mild steel under boundary lubrication", Tribology International, 43, pp.474~482 (2010)
- Seok, J. W., "Tribological properties of a Magnetorheological (MR) fluid in a finishing process", Tribology Transactions, 52, pp.460~469 (2009)
- Song, W. L., "Wear and friction characteristics of magnetorheological fluid under magnetic field activation", Tribology Transactions, 54, pp.616~624 (2011)
- Hu, Z. D., "Friction and wear of magnetorheological fluid under magnetic field", Wear, 278-279, pp.48~52 (2012)
- Stanford, M. K., "Friction and wear characteristics of hard coatings", Wear, 251, pp.990~996 (2001)
- Holmberg, K., "Tribology of thin coatings", Ceramics International, 26, pp.787~795 (2000)
- Kenneth H, "Friction and wear of coated surfaces-scales, modeling and simulation of tribomechanisms", Surface coatings technology, 202, pp.1034~1049 (2007)
- Pettersson, U., "Friction and wear properties of micro textured DLC coated surface in boundary lubricated sliding", Tribology Letter, 17, pp.553~559 (2004)
- Ouyang, J. H., "Friction and wear characteristics of a Ti-containing diamond-like carbon coating with an SRV tester at high contact load and elevated temperature", Surface & Coating Technology, 195, pp.234~244 (2005)
- Friderich, K., "Effects of steel counterface roughness and temperature on the friction and wear of PE(E)K composites under dry sliding conditions", Wear, 48(2), pp.235~247 (1991)
- Zhang, P., "Reciprocating friction characteristics of magneto-rheological fluid for aluminum under magnetic field", Trans. Nonferrous Met. Soc. China, 24(1), pp.171~176 (2014)
- Basavaraju, M., "Effect of soft material hardness and hard material surface morphology on friction and transfer layer formation; dry condition", International journal of recent technology and engineering, 2, pp.40~46 (2013)