ZnDTP를 첨가한 혼합윤활유(광유/식물성 오일)의 마모, 산화 및 전단 특성
Wear, Oxidation and Shear Characteristics of Mixed Lubricating Oil (Mineral/Vegetable oil) with ZnDTP
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Vegetable oils can contribute to the goal of energy independence and security owing to their naturally renewable resources. One of the representative vegetable oils is biodiesel, which is being used in domestic and European markets as a blended fuel with automotive diesel. Vegetable oils are promising candidates as base fluids to replace petroleum lubricants because of their excellent lubricity and biodegradability. We prepared biodiesel with a purity of 99.9% via the esterification of waste cooking oil. Blended biodiesel and Petro-lube base oil were mixed to produce five types of mixed lubricating oil. We analyzed the various characteristics of the blended biodiesel with Petro-lube base oil for different blending ratios. The lubricity of the vegetable lubricant improves as the content of biodiesel increases. In addition, since zinc dialkyldithiophosphates (ZnDTPs) are widely used as multifunctional additives in petroleum-based lubricants, we optimized the blending ratio for lubricity, oxidation stability, and shear stability by adding ZnDTP as a performance additive to improve the biodiesel properties, such as oxidation stability and hydrolysis. The optimized lubricants improve by approximately 25% in lubricity and by 20 times in oxidation stability and shear stability after the addition of ZnDTP.
Abstract
Vegetable oils can contribute to the goal of energy independence and security owing to their naturally renewable resources. One of the representative vegetable oils is biodiesel, which is being used in domestic and European markets as a blended fuel with automotive diesel. Vegetable oils are promising candidates as base fluids to replace petroleum lubricants because of their excellent lubricity and biodegradability. We prepared biodiesel with a purity of 99.9% via the esterification of waste cooking oil. Blended biodiesel and Petro-lube base oil were mixed to produce five types of mixed lubricating oil. We analyzed the various characteristics of the blended biodiesel with Petro-lube base oil for different blending ratios. The lubricity of the vegetable lubricant improves as the content of biodiesel increases. In addition, since zinc dialkyldithiophosphates (ZnDTPs) are widely used as multifunctional additives in petroleum-based lubricants, we optimized the blending ratio for lubricity, oxidation stability, and shear stability by adding ZnDTP as a performance additive to improve the biodiesel properties, such as oxidation stability and hydrolysis. The optimized lubricants improve by approximately 25% in lubricity and by 20 times in oxidation stability and shear stability after the addition of ZnDTP.
참고문헌 (18)
- Omer, A. M., "Energy, environment and sustainable development", Renew. Sust. Energ. Rev., 12, pp.2265~2300 (2008)[DOI]
- Schlager, N., "Alternative energy", pp.75~ (2006), TomsonGale
- Lal, K., "Performance testing of lubricants based on high oleic vegetable oils", J. Synth. Lubr., 11, pp.189~206 (1994)[DOI]
- Lathi, P. S., "Green approach for the preparation of Biodegrable lubricant base stock from epoxidized vegetable oil", Appl. Catal. B-Environ., 69, pp.207~212 (2007)[DOI]
- "ASTM D4172, Standard test method for wear preventive characteristics of lubricating fluid", ASTM International, ~ (2016)
- "ASTM D2272, Standard test method for oxidation stability of steam turbine oils by rotating pressure vessel", ASTM International, ~ (2014)
- "ASTM D6278, Standard test method for shear stability of polymer containing fluids using European diesel injector apparatus", ASTM International, ~ (2017)
- Knothe, G., "Kinematic viscosity of biodiesel components and related compounds at low temperatures", Fuel, 86, pp.2560~2567 (2007)[DOI]
- Bouaid, A., "Long storage stability of biodiesel from vegetable and used frying oils", Fuel, 86, pp.2596~2602 (2007)[DOI]
- Fernando, S., "Effect of incompletely converted soybean oil on biodiesel quality", Energy, 32, pp.844~851 (2007)[DOI]
- Fox, N. J., "Vegetable oil based lubricants A review of oxidation", Tribol. Int., 40, pp.1035~1046 (2007)[DOI]
- Guzatto, R., "Trans esterification double step process modification for ethyl ester biodiesel production from vegetable and waste oils", Fuel, 92, pp.197~203 (2012)[DOI]
- de Lira, L. F. B., "Infrared spectroscopy and multivariate calibration to monitor stability quality parameters of biodiesel", Microchem. J., 96, pp.126~131 (2010)[DOI]
- Zhang, W. B., "Review on analysis of biodiesel with infrared spectroscopy", Renew. Sust. Energy Rev., 16, pp.6048~6058 (2012)[DOI]
- Xu, Y., "Characterization of the lubricity of bio-oil", diesel fuel blends by high frequency reciprocating test rig, 2010, pp.35, 283~287
- Castro, W., "The effect of chemical structure of basefluids on antiwear effectiveness of additives", Tribol. Int., 38, pp.321~326 (2005)[DOI]
- Fan, K., "Tribological characteristics of ashless dithiocarbamate derivatives and their combinations with ZDDP as additives in mineral oil", Tribol. Int., 41, pp.1226~1231 (2008)[DOI]
- Fox, N. J., "Vegetable oil based lubricants A review of oxidation", Tribol. Int., 40, pp.1035~1046 (2007)[DOI]