비포름알데하이드계 수지 가공제 처리한 면직물의 물리화학적 특성 변화와 최적 처리 조건에 관한 연구
Physicochemical Properties of Non-Formaldehyde Resin Finished Cotton Fabric and their Optimal Treatment Condition
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Cotton fabrics were treated with some commercial non-formaldehyde and low-formaldehyde resins, and then their effect on the physicochemical properties were respectively investigated including formaldehyde release, tear strength, shrinkage,and wrinkle recovery. Formaldehyde release less than 10ppm was obtained only by non-formaldehyde resin. Considering other factors, the optimal concentration of non-formaldehyde resin was shown to be 9-11%. In case of low-formaldehyde type, 5-7%resin concentration and curing temperature of 160~170℃ were recommended for optimal finishing condition. The choice and combination of resins and catalysts were also important factors, and preliminary considerations before treating cotton fabrics with resins used in this study are also important to get much better results.
Abstract
Cotton fabrics were treated with some commercial non-formaldehyde and low-formaldehyde resins, and then their effect on the physicochemical properties were respectively investigated including formaldehyde release, tear strength, shrinkage,and wrinkle recovery. Formaldehyde release less than 10ppm was obtained only by non-formaldehyde resin. Considering other factors, the optimal concentration of non-formaldehyde resin was shown to be 9-11%. In case of low-formaldehyde type, 5-7%resin concentration and curing temperature of 160~170℃ were recommended for optimal finishing condition. The choice and combination of resins and catalysts were also important factors, and preliminary considerations before treating cotton fabrics with resins used in this study are also important to get much better results.
참고문헌 (25)
- W. D. Schindler, "Chemical Finishing of Textiles", pp.51~72 (2004), Woodhead Publishing
- K. S. Huang, "Application of Low-molecular-weight Chitosan in Durable Press Finishing", Carbohydrate Polymers, 73, pp.254~ (2008)
- M. Hashem, "An Eco-friendly Novel Approach for Attaining Wrinkle-free", Soft-hand Cotton Fabric, 2009, pp.78, 690~
- Y. A. Kwon, "Durable Press Performance and Water Repellency of Cotton", Polyester Fabrics Finished by DMDHEU, J. Korean Soc. Dyers & Finishers, pp.1998, 10(5)[DOI]
- M. Lewin, "Handbook of Fiber Science and Technology: Vol Ⅱ, PART A", pp.34~194 (1983), Marcel Dekker
- BASF, "Textile Finishing Published by Manual", pp.17~46 (1973), Federal Republic of Germany
- M. K. Uddin, "Physical Properties of Jute Dyed Fabric Crosslinked with DMDHEU", J. Bio. Sci., 7(1), pp.68~ (2007)
- I. Holme, "Development in Coss-linking Agents and Catalysts", International Dyer, 191, pp.8~ (2006)
- 이의소, "Glyoxal", Aluminium Ammonium Sulfate를 이용한 면직물의 DP 가공에서 첨가제의 영향, 2006, pp.43(4), 172~177[DOI]
- X. Gu, "FTIR Spectroscopy Study of the Formation of Cyclic Anhydride Intermadiates of Polycarboxylic Acids Catalyzed by Sodium Hypophospfite", Text. Res. J., 70, pp.64~ (2000)
- C. Q. Yang, "Evaluating Glutaraldehyde as a Non Formaldehyde Durable Press Finishing Agent for Cotton Fabrics", Text. Res. J., 70, pp.230~ (2000)
- C. Schramm, "Non Formaldehyde Durable Press Finishing of Cotton Fabric : Quantitave Evaluation of Cellulose-Bound Glyoxal", Text. Res. J., 72, pp.357~ (2002)
- J. H. Chung, "Low Formaldehyde DP Finish of Polyester", Cotton Blended Fabric, Textile Science and Engineering, 1993, pp.30(8), 600~
- J. M. Lee, "Effect of Polyhydroxy Alcohols as Formaldehyde Scavenger for Durable Press Cotton Fabrics", J. Korean Soc. Text. Eng. Chem., 24(4), pp.59~ (1987)
- C. M. Welch, "Glyoxal as a Non-Nitrogenous Formaldehyde-Free Durable-Press Reagent for Cotton", Text. Res. J., 52, pp.149~ (1982)
- C. M. Welch, "Glyoxal as a Formaldehyde-Free Durable-Press for Mild Curing Applications", Text. Res. J., 53, pp.181~ (1983)
- C. H. Tsou, "Scavenger Treatment for Reducing Formaldehyde Content in Resin-Finished Fabrics", 석사, pp.1977
- C. Lee, "Scavenger Treatment for Reducing Formaldehyde in Textile Finishing", 석사, pp.1978
- Y. H. Park, "Scavenger Treatment for Reducing Formaldehyde Content in Resin-Finished Fabrics", J. Korean Soc. Text. Eng. Chem., 23(3), pp.39~ (1986)
- E. Barbara, "Encyclopedia of Industrial Chemical, 5th Ed.", pp.491~ (1989), Weinheim VCH
- Y. L. Lam, "Wrinkleresistant Finishing of Cotton Fabric with BTCA -The Effect of Co-catalyst", Tex. Res. J., 81(5), pp.482~ (2010)
- Y. L. Lam, "Wrinkleresistant Finishing with Dimethyloldihydroxyethyleneurea( DMDHEU) -The Effect of Co-catalyst", Tex. Res. J., 81(14), pp.1419~ (2010)
- C. C. Chen, "Crosslinking of Cotton Cellulose with Succinic Acid in the presence of Titanium Dioxide Nano-catalyst under UV Irradiation", J. Sol-Gel Sci. Tech., 40(1), pp.3~ (2006)
- S. B. Vukusic, "DP Finishing with Polycarboxylic Acids and Phosphono-based Catalyst", AATCC Review, 10, pp.14~ (2002)
- 강인숙, "Succinic Acid 처리면포의 역학 특성 - 인열강도 -", 한국염색가공학회지, 21(3), pp.1~9 (2009), 한국염색가공학회