실리콘 오일 점도에 따른 ABS-like 레진의 트라이볼로지 특성
Tribological Characteristics of ABS-like Resin Accordingto Silicon Oil Viscosity
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Recently, additive manufacturing (AM) technology has been applied to various industries such as automotive, aviation, medical, and electronics. Most prior studies are limited to the mechanical properties of printed materials, and few studies are being conducted on their tribological characteristics. However, the friction and wear characteristics of the material should be studied in order to utilize the components manufactured using AM technology as mechanical parts. In this study, the friction and wear characteristics of acrylonitrile-butadiene-styrene (ABS)-like resin printed with stereo lithography apparatus (SLA) 3D printing are evaluated according to the viscosity of silicon oil lubricant using a ball-on-disk experiment. Lubricants with a viscosity of 500, 1000, and 2000 cSt are prepared for the experiment. If silicon oil lubricants are used during the ball-on-disk test, the coefficient of friction (COF) and wear rates are significantly reduced, and the higher the viscosity of the lubricant, the lower will be the COF and wear rates. It is also verified that the temperature of the specimen owing to friction also decreases according to the viscosity of the lubricant. This is because of the silicon oil film thickness, and the higher the viscosity of the lubricant, the thicker will be the oil film. More studies on the tribological characteristics of 3D printing materials and suitable lubricants will be required to use 3D printed parts as mechanical elements.
Abstract
Recently, additive manufacturing (AM) technology has been applied to various industries such as automotive, aviation, medical, and electronics. Most prior studies are limited to the mechanical properties of printed materials, and few studies are being conducted on their tribological characteristics. However, the friction and wear characteristics of the material should be studied in order to utilize the components manufactured using AM technology as mechanical parts. In this study, the friction and wear characteristics of acrylonitrile-butadiene-styrene (ABS)-like resin printed with stereo lithography apparatus (SLA) 3D printing are evaluated according to the viscosity of silicon oil lubricant using a ball-on-disk experiment. Lubricants with a viscosity of 500, 1000, and 2000 cSt are prepared for the experiment. If silicon oil lubricants are used during the ball-on-disk test, the coefficient of friction (COF) and wear rates are significantly reduced, and the higher the viscosity of the lubricant, the lower will be the COF and wear rates. It is also verified that the temperature of the specimen owing to friction also decreases according to the viscosity of the lubricant. This is because of the silicon oil film thickness, and the higher the viscosity of the lubricant, the thicker will be the oil film. More studies on the tribological characteristics of 3D printing materials and suitable lubricants will be required to use 3D printed parts as mechanical elements.
참고문헌 (11)
- Dizon, J. R. C., "Mechanical characterization of 3D-printed polymers", Addit. Manuf, 20, pp.44~67 (2018)
- Paolini, A., "Additive manufacturing in construction : A review on processes, applications, and digital planning methods", Addit. Manuf, 30, pp.100894~ (2019)
- Melchels, F. P. W., "A review on streolithography and its application in biomedical engineering", Biomaterials, 31, pp.6121~6130 (2010)
- Ngo, T. D., "Additive manufacturing(3D printing) : A review of materials, methods, appli-cations and challenges", Compos. B. Eng, 143, pp.172~196 (2018)
- Sagias, V. D., "Mechanical properties of 3D printed polymer specimens", Procedia Structural Integrity, 10, pp.85~90 (2018)
- 심재웅, "3D 프린팅된 표면의 슬라이딩 방향에 따른 트라이볼로지적 특성 연구", 한국트라이볼로지학회지, 35(6), pp.337~342 (2019), 한국트라이볼로지학회[DOI]
- Son, J., "Preliminary Study on Polishing SLA 3D-Printed ABS-like Resins for Surface Roughness and Glosiness Reduction", Micromachines, 11, pp.843~ (2020)
- 손준규, "ABS 유사 수지의 연마에서 마찰 특성이 표면 거칠기 및 광택도에 미치는 영향", 한국정밀공학회지, 37(11), pp.797~802 (2020), 한국정밀공학회[DOI]
- 조영상, "무윤활 상태에서 3D 프린팅용 ABS-like 레진의 마찰 및 마모 특성에 관한 연구", 한국정밀공학회지, 36(12), pp.1117~1124 (2019), 한국정밀공학회[DOI]
- "DEDEM"[URL]
- "ShinEtsu"[URL]