복열테이퍼 롤러베어링 지지특성에 따른 오버헝 회전축시스템의 동적 거동 예측 및 접촉부 압력 해석
Prediction of the Dynamic behavior and Contact Pressure of Overhung Rotor Systems According to the Support Characteristics of Double-row Tapered Roller Bearings
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study establishes a numerical analysis model of the finite element overhung rotor supported by a DTRB and describes the stiffness properties of the DTRB. The vibration characteristics and contact pressure of the RBR system are predicted according to the DTRB support characteristics such as the initial axial compression and roller profile. The stiffness of the DTRB significantly varies depending on the initial axial compression and external load owing to the occurrence of rollers under the no-load condition and increase in the Hertz contact force. The increase in the initial axial compression increases the rigidity of the DTRB, thereby reducing the displacement of the RBR system and simultaneously increasing the natural frequency. However, above a certain initial axial compression, the effect becomes insignificant, and an excessive increase in the initial axial compression increases the contact pressure. The roller crowning radius, which gives a curvature in the longitudinal direction of the roller, decreases the displacement of the RBR system and increases the natural frequency as the value increases. However, an increase in the crowning radius increases the edge stress, causing a negative effect in terms of the contact pressure. These results show that the DTRB support characteristics required for reducing the vibration and contact pressure of the RBR system supported by the DTRB can be designed.
Abstract
This study establishes a numerical analysis model of the finite element overhung rotor supported by a DTRB and describes the stiffness properties of the DTRB. The vibration characteristics and contact pressure of the RBR system are predicted according to the DTRB support characteristics such as the initial axial compression and roller profile. The stiffness of the DTRB significantly varies depending on the initial axial compression and external load owing to the occurrence of rollers under the no-load condition and increase in the Hertz contact force. The increase in the initial axial compression increases the rigidity of the DTRB, thereby reducing the displacement of the RBR system and simultaneously increasing the natural frequency. However, above a certain initial axial compression, the effect becomes insignificant, and an excessive increase in the initial axial compression increases the contact pressure. The roller crowning radius, which gives a curvature in the longitudinal direction of the roller, decreases the displacement of the RBR system and increases the natural frequency as the value increases. However, an increase in the crowning radius increases the edge stress, causing a negative effect in terms of the contact pressure. These results show that the DTRB support characteristics required for reducing the vibration and contact pressure of the RBR system supported by the DTRB can be designed.
참고문헌 (11)
- 박태조, "Tilting 상태인 테이퍼 로울러의 탄성유체윤활 해석", 한국트라이볼로지학회지, 31(4), pp.177~182 (2015), 한국트라이볼로지학회[DOI]
- Lee, Y. K., "Prediction of Crack Cause to Develop Durability Test Mode of Tapered Roller Bearing for Commercial Vehicle Wheel Hub", Proc. Fall Conf. Korean Tribol. Soc (2022)
- Cao, H., "Mechanical Model Development of Rolling Bearing-Rotor Systems : A Review", Mech. Syst. Signal Process, 102, pp.37~58 (2018)
- Bercea, I., "Analysis of Double-Row Tapered Roller Bearings, Part i-Model", Tribol. Trans, 46(2), pp.228~239 (2003)
- Yang, L., "Mechanical Behavior of Double-Row Tapered Roller Bearing under Combined External Loads and Angular Misalignment", Int. J. Mech. Sci, 142, pp.561~574 (2018)
- Luo, J. W., "Analysis and Application of Rolling Bearing" (2009), China Machine Press
- Sinou, J. J., "Non-Linear Dynamics and Contacts of an Unbalanced Flexible Rotor Supported on Ball Bearings", Mech. Mach. Theory, 44(9), pp.1713~1732 (2009)
- Bai, C., "Subharmonic Resonance of a Symmetric Ball Bearing-Rotor System", Int. J. Non. Linear. Mech, 50, pp.1~10 (2013)
- Cui, L., "Nonlinear vibration and stability analysis of a flexible rotor supported on angular contact ball bearings", Journal of Vibration and Control, 20(12), pp.1767~1782 (2014)
- Tsuha, N. A. H., "Stiffness and Damping of Elastohydrodynamic Line Contact Applied to Cylindrical Roller Bearing Dynamic Model", J. Sound Vib, 481, pp.1~22 (2020)
- Liu, H., "Nonlinear dynamic analysis of CNC lathe spindle-bearing system considering thermal effect", Nonlinear Dynamics, 105(1), pp.131~166 (2021)