α-티타늄 평판표면에서 강체 구형팁의 스크래치로 인한내부 결정구조 특성 변화에 대한 연구
A Study on Crystalline Structural Variations of the RigidSpherical-Tip scratch on the Surface of α-Titanium substratesvia Molecular Dynamics Simulations
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Titanium alloys are widely recognized among engineering materials owing to their impressive mechanical properties, including high strength-to-weight ratios, fracture toughness, resistance to fatigue, and corrosion resistance. Consequently, applications involving titanium alloys are more susceptible to damage from unforeseen events, such as scratches. Nevertheless, the impact of microscopic damage remains an area that requires further investigation. This study delves into the microscopic wear behavior of α-titanium crystal structures when subjected to linear scratch-induced damage conditions, utilizing molecular dynamics simulations as the primary methodology. The configuration of crystal lattice structures plays a crucial role in influencing material properties such as slip, which pertains to the movement of dislocations within the crystal structure. The molecular dynamics technique surpasses the constraints of observing microscopic phenomena over brief intervals, such as sub-nano- or pico-second intervals. First, we demonstrate the localized transformation of lattice structures at the end of initialization, indentation, and wear processes. In addition, we obtain the exerted force on a rigid sphere during scratching under linear movement. Furthermore, we investigate the effect of the relaxation period between indentation and scratch deformation. Finally, we conduct a comparison study of nanoindentation between crystal and amorphous Ti substrates. Thus, this study reveals the underlying physics of the microscopic transformation of the α-titanium crystal structure under wear-like accidental events.
Abstract
Titanium alloys are widely recognized among engineering materials owing to their impressive mechanical properties, including high strength-to-weight ratios, fracture toughness, resistance to fatigue, and corrosion resistance. Consequently, applications involving titanium alloys are more susceptible to damage from unforeseen events, such as scratches. Nevertheless, the impact of microscopic damage remains an area that requires further investigation. This study delves into the microscopic wear behavior of α-titanium crystal structures when subjected to linear scratch-induced damage conditions, utilizing molecular dynamics simulations as the primary methodology. The configuration of crystal lattice structures plays a crucial role in influencing material properties such as slip, which pertains to the movement of dislocations within the crystal structure. The molecular dynamics technique surpasses the constraints of observing microscopic phenomena over brief intervals, such as sub-nano- or pico-second intervals. First, we demonstrate the localized transformation of lattice structures at the end of initialization, indentation, and wear processes. In addition, we obtain the exerted force on a rigid sphere during scratching under linear movement. Furthermore, we investigate the effect of the relaxation period between indentation and scratch deformation. Finally, we conduct a comparison study of nanoindentation between crystal and amorphous Ti substrates. Thus, this study reveals the underlying physics of the microscopic transformation of the α-titanium crystal structure under wear-like accidental events.
참고문헌 (18)
- Gurrappa, I. J. M. C, "Characterization of titanium alloy Ti-6Al-4V for chemical, marine and industrial applications", Mater Charact, 51(2-3), pp.131~139 (2003)
- Balazic, M., "Titanium and titanium alloy applications in medicine", Int. J. Nano Biomater, 1(1), pp.3~34 (2007)
- Veiga, C., "Properties and applications of titanium alloys : a brief review", Rev. Adv. Mater. Sci, 32(2), pp.133~148 (2012)
- Lin, Z., "A review on wire and arc additive manufacturing of titanium alloy", J. Manuf. Process, 70, pp.24~45 (2021)
- Dutta, B., "The additive manufacturing(AM)of titanium alloys", Met. Powder Rep, 72(2), pp.96~106 (2017)
- Frazier, W. E., "Metal additive manufacturing : a review", J. Mater. Eng, 23, pp.1917~1928 (2014)
- Li, N., "Progress in additive manufacturing on new materials : A review", J MaterSci Technol, 35(2), pp.242~269 (2019)
- Taeil Yi, "A study of conformational variation of temperature-dependent PEEK molecular structures subject to stretching speeds by molecular dynamics simulations", Journal of Mechanical Science and Technology, 36(8), pp.4143~4151 (2022), 대한기계학회[DOI]
- Ngo, T. D., "Additive manufacturing(3D printing) : A review of materials, methods, applications and challenges", Compos. B. Eng, 143, pp.172~196 (2018)
- Singh, P., "A review of study on modeling and simulation of additive manufacturing processes", Mater. Today, 56, pp.3594~3603 (2022)
- Beladi, H., "Variant selection and intervariant crystallographic planes distribution in martensite in a Ti–6Al–4V alloy", Acta Materialia, 80, pp.478~489 (2014)
- Lee, B. J., "Second nearest-neighbor modified embedded-atom-method potential", Phys. Rev. B, 62(13), pp.8564~ (2000)
- Cherne, F. J., "Properties of liquid nickel : A critical comparison of EAM and MEAM calculations", Phys. Rev. B, 65(2), pp.024209~ (2001)
- Kim, Y. K., "Atomistic modeling of the Ti–Al binary system", Comput. Mater. Sci, 119, pp.1~8 (2016)
- Thompson, A. P., "LAMMPS-a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales", Comput Phys Commun, 271, pp.108171~ (2022)
- Stukowski, A., "Visualization and analysis of atomistic simulation data with OVITO – the Open Visualization Tool", Modelling Simul. Mater. Sci. Eng, 18, pp.015012~ (2010)
- 김창래, "Modification of Thin Film Friction and Wear Modelswith Effective Hardness", 한국트라이볼로지학회지, 36(6), pp.320~323 (2020), 한국트라이볼로지학회[DOI]
- 강원빈, "나노스케일 마찰거동에서 스프링 상수가 마찰에 미치는 영향에 대한 분자동역학 연구", 한국트라이볼로지학회지, 37(2), pp.77~80 (2021), 한국트라이볼로지학회[DOI]