LPG 액정분사식 대형버스용 엔진 피스톤의 피로수명 해석과 냉각조건 평가
Fatigue Life Analysis and Cooling conditions Evaluation of a Piston for Large LPLi Bus Engines
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Abstract
Fatigue life of a piston for large liquid petroleum liquid injection(LPLi) bus engines is analyzed considering effects of cooling condition parameters: temperature of cooling water, and heat transfer coefficients at oil gallery and bottom surface of piston head. Temperature of the piston is analyzed with varying cooling conditions. Stresses of the piston from two load cases of pressure loading, and pressure and thermal loading are analyzed. Fatigue life under repeated peak pressure and thermal cycle is analyzed by the strain-life theory. For the two load cases, required loading cycles for engine life are defined, and loading cycles to failure and partial damages are calculated. Based on the resulting accumulated fatigue usage factors, endurance of the piston is evaluated and effects of varying cooling condition parameters are discussed.
참고문헌 (11)
- "저공해 대형 LPG 엔진 개발 기반기술 연구 보고서" (2002), ^한국기계연구원
- "최경호"대형 LPG 엔진 피스톤의 온도 분포 해석을 위한 열전도 역문제에 관한 연구", 19(11), pp.146~159 (2002)
- "LPG 액정분사 방식의 대형 엔진용 피스톤의 온도분포와 열응력 해석", 28(3), pp.538~550 (2004)
- "Fundamentals of Metal Fatigue Analysis" (1990)
- "Transient Heat Conduction in Low-Heat Rejection Engine Combustion Chambers", 870156, pp.153~163 (1987)
- "연소실 대류 및 복사 열전달 해석", 13(4), pp.11 1991~17
- "Internal Combustion Engine Heat Transfer", pp.~13 (1987)
- "Piston Thermal Deformation and Friction Considerations", 820086 (1982)
- "Heat Flow in Pistons" (1973)
- "Stress Calculations of Pistons" (1979)
- "Stress Calculations of Pistons" (1979)