히트 파이프를 장착한 디스크브레이크의 냉각 성능에 관한 연구
A Study for the Cooling Performance of a Brake with Heat Pipes
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
During braking operation, the surfaces of disk have severe contact conditions and high frictional heat would be generated between disk and pad surfaces. The heat makes high temperature gradient on disk surfaces and results in thermal deformation. To enhance the frictional heat dissipation, heat pipes are embedded in the ventilated type disk along the radial direction. The temperatures of the inner vent type disk and the brake disk with heat pipes are compared at the same operating conditions. By comparison a brake disk with heat pipes has higher cooling performance than the inner vent type disk.
Abstract
During braking operation, the surfaces of disk have severe contact conditions and high frictional heat would be generated between disk and pad surfaces. The heat makes high temperature gradient on disk surfaces and results in thermal deformation. To enhance the frictional heat dissipation, heat pipes are embedded in the ventilated type disk along the radial direction. The temperatures of the inner vent type disk and the brake disk with heat pipes are compared at the same operating conditions. By comparison a brake disk with heat pipes has higher cooling performance than the inner vent type disk.
참고문헌 (6)
- Yeo. T. I, "Finite Element Analysis of Thermoelastic Contact Stability with Sliding Friction", J. of KSME. Series A, 22(7), pp.1185~1192 (1998)
- H. Cho, "Analysis of The Cause for Judder Vibration of Automotive Disk Brake", KSAE 2005 fall conference, pp.1056~1061 (2005)
- Condition of Frictional Contact in Disk and Their Effect on Brake Judder, "K. Lee", ~, pp.SAE 980598
- The Brake Judder Phenomenon, "A. Vries", 25~33, pp.SAE 920554 (SP-914) (1992)
- Effect of Disk Material Selection on Disk Brake Rotor Configuration, "Rainbolt. J. D", 1973~1814, pp.SAE 750733 (1975)
- Floquet. A., "Realistic Operation Simulation of Ventilated Disk Brakes", J. of Tribology, 118, pp.466~472 (1996)