직렬 4원주 주위의 유체유동 및 열전달에 관한 실험적 연구
An Experimental Study on Fluid Flow and Heat Transfer Around Four Circular Cylinders of In-line
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Heat exchangers are commonly used in practice in a wide range of application, from heat and air-conditioning system in a household, to chemical processing and power production in large plant. An Experimental study was conducted to investigated the fluid flow and heat transfer around four circular cylinders of in-line in a cross flow of air. The local and average heat transfer characteristics for tube banks are investigated in the present study. Heat transfer in a heat exchanger usually involves convection in each fluid and conduction through the wall separating the two fluid. The in-line pitch ratio was in the range 1.5≤L/d≤4.0, where L is the center distance and d the cylinder diameter, and in the Reynolds number 8,000≤Re≤50,000. The local and mean Nusselt numbers were estimated. Subsequently, the heat transfer characteristics of four circular cylinders are found to exhibit a strong dependency upon the separation point of their upstream cylinders.
Abstract
Heat exchangers are commonly used in practice in a wide range of application, from heat and air-conditioning system in a household, to chemical processing and power production in large plant. An Experimental study was conducted to investigated the fluid flow and heat transfer around four circular cylinders of in-line in a cross flow of air. The local and average heat transfer characteristics for tube banks are investigated in the present study. Heat transfer in a heat exchanger usually involves convection in each fluid and conduction through the wall separating the two fluid. The in-line pitch ratio was in the range 1.5≤L/d≤4.0, where L is the center distance and d the cylinder diameter, and in the Reynolds number 8,000≤Re≤50,000. The local and mean Nusselt numbers were estimated. Subsequently, the heat transfer characteristics of four circular cylinders are found to exhibit a strong dependency upon the separation point of their upstream cylinders.
참고문헌 (10)
- Ikuo Mabuchi, "Dluid Flow Behavior around a Circular Cylinder Perpendicular Arrangement of Circular Cylinders", JSME B, 56(526), pp.1588~1594 (1990)
- Shinya Aiba, "Heat Transfer around a Circular Cylinder with a Single Tripping Wire", JSME B, 57(536), pp.1371~1378 (1991)
- Tetsushi Nakai, "Cross Flow Through in Closely Arranged Circular Cylinders", JSME B, 62(593), pp.pp65~71 (1996)
- Tamotsu Igarash, "Characteristics of the Flow around Two Circular Cylinders Arranged in Tandem", JSME B, 24(188), pp.323~328 (1981)
- Z.G.Kostic, "Fluid Flow and Heat Transfer with Two Cylinders in Cross Flow", Int.J.Mass Trans, 15, pp.279~299 (1972)
- Munehiko Hiwada, "Fluid Flow and Heat transfer of Two Circular Cylinder with Same Diameter", JSME B, 48(427), pp.499~508 (1983)
- Okasima, "Fluid Flow around a Two Cylinder of in-line with High Reynolds Number", JSME B, 44(384), pp.2663~2671 (1979)
- Tamotsu Igarashi, "Fluid Flow and Heat Transfer Around Two Circular Cylinders Closely Arranged in Tandem", JSME B, 55(517), pp.2800~2808 (1989)
- Shinya Aiba, "Heat Transfer Around a Tube in a Bank", JSME, 23(181), pp.1163~1170 (1980)
- Tamotsu Igarashi, "Characteristics of the Flow around Four Circular Cylinders", 51(467), pp.2061~2067 (1986)