완전 혼화조를 이용한 폐수처리 공정의 응집특성
Coagulation Characteristics of Wastewater Treatment Process Using Completely Mixed Chamber
2
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
본 논문은 완전 혼화조를 이용한 폐수처리 공정의 응집특성에 대한 연구를 목적으로 한다. 완전 혼화조 시스템은 유체 저장조, 임펠러가 장착된 3단의 혼화 및 응집부, 응집보조제 및 응집제 주입부, 응 집 침전조 그리고 제어부로 구성된다. 실험용 폐수는 터널 공사현장에서 폐수 슬러지를 수거하여 약 1,000NTU의 탁도를 갖도록 만들었다. 응집보조제의 주입량이 증가함에 따라 약 99% 정도까지 탁도 제 거율이 증가하였으며, 응집제의 주입량이 일정한 범위 이상으로 증가하면 탁도 제거율이 감소하는 것을 알 수 있다.
Abstract
The objective of this study is to investigate the coagulation characteristics of the completely mixed chamber for wastewater treatment. The completely mixed chamber system was composed of the reservoirs, the three-stage mixing and coagulation part with propeller impeller, the injection parts of coagulants, a sedimentation tank and a control panel. Wastewater sample of pH 8.5 and initial turbidity 1,000NTU was prepared using sludge taken from a tunneling work site. The efficiency of turbidity removal with increasing the dosage of coagulant aids increased by about 99%. Increasing coagulant above the optimal dosage, however, the efficiency of turbidity removal decreased.
참고문헌 (16)
- 이철희, "정수처리에 있어서 철-실리카 무기고분자 응집제를 이용한 조류 및 Cryptosporidium의 제거", 대한환경공학회지, 26(8), pp.876~882 (2004), 대한환경공학회
- S. H. Kim, "Characterizing and monitoring of coagulation and floc formation by using photometric dispersion analyzer(PDA)", RIST Research Paper, 18(4), pp.323~327 (2004)
- S. Kawamura, "Integrated Design and Operation of Water Treatment Facilities" (2000), John Wiley & Sons
- G. S. Song, "Numerical study on flow patterns in a stirred tank with impeller types", J. of Fluid Machinery, 5(3), pp.29~35 (2002)
- C. Luo, "Distribution of velocities and velocity gradients in mixing and flocculation vessels: comparison between LDV data and CFD predictions", 박사, pp.1997
- J. J. Ducoste, "The effects of tank size and impeller type on turbulent flocculation", 박사, pp.1996
- J. K. Jeong, "Influence of mixing intensity on the biological wastewater treatment", J. of KSEE, 5, pp.67~83 (1983)
- 이상화, "응집 공정상에서 플럭의 성장 특성 고찰", Korean Chemical Engineering Research(HWAHAK KONGHAK), 44(2), pp.207~215 (2006), 한국화학공학회
- M. I. Aguilar, "Improvement of coagulation-locculation process using anionic polyacrylamide as coagulant aid", Chemosphere, 58, pp.47~56 (2005)
- A. H. Mahvi, "Application of polyelectrolyte in turbidity removal from surface water", American J. of Applied Sciences, 2(1), pp.397~399 (2005)
- J. M. Ebeling, "Evaluation of chemical coagulation-flocculation aids for the removal of suspended solids and phosphorus from intensive recirculating aquaculture effluent discharge", Aquacultural Engineering, 29, pp.23~42 (2003)
- T. Nandy, "Pre-treatment of currency printing ink wastewater through coagulation-flocculation process", Water, Air, and Soil Pollution, 148, pp.15~30 (2003)
- H. S. Kim, "The experimental study of predicting optimum dosage of PAC using Jar-Test results", J. of KSWW, 2, pp.39~45 (1993)
- 한승우, "수처리용 Al(III)계 무기고분자응집제 제조시 물리적 영향", Korean Chemical Engineering Research(HWAHAK KONGHAK), 42(5), pp.612~618 (2004), 한국화학공학회
- L. S. Kang, "Synthesis and characterization of polymeric inorganic coagulants for water treatment", Korean J. Chem. Eng., 18(6), pp.965~970 (2001)
- C. Huang, "Coagulation of colloidal particles in water by chitosan", J. Chem. Tech. Biotechnol., 66, pp.227~232 (1996)