비파괴검사에 의한 A2024 마찰교반용접부의 건전성 평가
Soundness evaluation of friction stir welded A2024 alloy by non-destructive
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
마찰교반용접은 운송 분야 등에서 널리 상업화되고 있다. 본 연구는 마찰교반용접된 A2024-T4합금의 결함을 비파괴검사(방사선투과검사, 초음파탐상시험, 전기전도도시험)와 파괴시험(인장강도및 미세조직 관찰)을 실시하여 관찰하였다. 실험 결과 결함 분포도를 얻을 수 있었다. 방사선투과검사에서 발견되지 않은 미세결함이 초음파탐상시험에서는 발견되었으며, 초음파탐상시험은 음압의 차이와 그에 대응하는 색에 의해 결함의 정도를 검사할 수 있는 효과적인 방법이었다. 또한 전기전도도 측정값은 결함의 양이 많아짐에 따라 감소하는 경향을 보였다. 비파괴검사와 파괴검사를 통해 얻은 가장 건전한 조건의 이음 효율은 91% 이었다. 따라서 비파괴검사는 마찰교반용접된 A2024-T4 합금을 검사하는데 있어서 효과적인 방법이라 사료된다.
Abstract
Friction Stir Welding (FSW) was developed, it is successfully commercialized in the field of transportation vehicles. In this study, we analyzed the defects of A2024-T4 alloy using non-destructive test of radiograph, ultrasonic, electrical conductivity and destructive test of microstructure observation,tensile strength. As the results of experiment, mapping of defects was obtained. Fine defects which were not detected in radiograph test were detected in ultrasonic test, and it enabled efficient detection of defects by difference of sound pressure and color. The values of electrical conductivity was decreased as amount of defects was increasing. Joint efficient of defect-free weldment that found by non-destructive and destructive test was 91%. Therefore it was considered that non-destructive test of friction stir welded A2024-T4 Alloy was an efficient method.
참고문헌 (9)
- W. M Thomas, "Friction stir butt welding", International Patent Application No. PCT, 1991
- 장석기, "Al 5083O합금의 마찰교반용접부의 조직과 특성평가", 한국마린엔지니어링학회지, 33(1), pp.104~111 (2009), 한국마린엔지니어링학회
- W. S. Chang, "Some aspects of friction stir welding and Its application technologies", Journal of Korean Welding Society, 19(6), pp.7~15 (2001)
- C. R. Bird, "Ultrasonic phased array inspection technology for the evaluation of friction stir welds", The Welding Institute, 4th International Friction Stir Welding Symposium ark City (2003)
- Y.-S. Ahn, "Non-destructive inspection for welded part by using digital radiography technique", Proceedings of the Korean Welding Society Conference, pp.12~14 (2005)
- KS B 083, "Methods of Tensile Test for Butt Welded Joints", Korea Standard, ~ (2006)
- William D Callister. Jr, "Fundamentals of Materials Science and Engineering", pp.673~674 (2007), John Wiley & Sons
- W.-B. Lee, "Effects of welding parameters on the friction stir weldability of 5052 Al alloy", Journal of Korean Welding Society, 22(3), pp.265~272 (2004)
- V. Soundararajan, "Investigation of the friction stir lap welding of aluminum alloys AA5182 and AA6022", Journal of Materials Engineering and Performance, 16, pp.477~484 (2007)