도재 수리용 레진의 색안정성에 관한 연구
A STUDY ON THE COLOR STABILITY OF PORCELAIN REPAIR RESINS
2
조회
0
다운로드
0
인용
0
참고문헌
초록
Abstract
Statement of problem: Porcelain restorations are widely used in restorative dentistry with a high degree of general success. However, porcelain is brittle and may fracture intraorally. Sometimes a repair may be attempted using composite resin and bonding system available. Color stability of porcelain repair resins affects esthetics and prognosis of prosthesis, so that provides important criteria for the choice of porcelain repair resins. Purpose: The purpose of this study was to investigate the color stability of composite resins used widely as porcelain repair system. Materials and method: Composite resins used for this study were Carisma(Kulzer, Germany), Tetric ceram(Ivoclar, Liechtenstein), Filtek Z250(3M, USA), and Arabesk Top(VOCO, Germany). Thirty disc-shaped specimens(10×2mm) were fabricated from each composite resin. Color changes of specimens after treatment using thermocycling system(KD-TCS30, Kwang-duk F.A. Korea) and after immersion in methylene blue(0.05% by Wt) were measured with colorimeter(Model Tc- 6Fx, Tokyo Denshoku Co.) and obtained data were analyzed. Results and Conclusion: The results obtained from this study were as follows. 1. The color change of Filtek Z250 was lesser than those of Tetric ceram and Arabesk Top after thermocycling (12000 times). 2. All of the composite resins in this study showed increase of color change according to increase of thermocycling frequency. 3. After treatment with methylene blue, the color change of Arabesk Top was greater than those of Carisma and Tetric ceram, and Tetric ceram was more stable than others.
참고문헌 (39)
- Mark AL, "Approaches forintraoral repair of ceramic restorations", 21, pp.635~9 (2000)
- Dent RJ, "Repair of porcelain fused tometal restorations", 41, pp.661~7 (1979)
- Bowen RL, "Properties of a silane reinforcedpolymer for dental restoration", 66, pp.57~64 (1963)
- Barreto MT, "A practicalapproach to porcelain repair", 61, pp.349~51 (1982)
- Newburg R, "Compositeresins bonded to porcelain with silanesolution", 96, pp.288~91 (1978)
- Highton RM, "Effectiveness of porcelain repair systems", 42, pp.292~4 (1979)
- Bello JA, "Bondstrength and microleakage of porcelainrepair materials", 54, pp.788~91 (1985)
- Choi JW, "A comparisonof the shear bond strength betweenthree porcelain repair systems and fracturedsurfaces of porcelain-fused-to-metal restorations", 28, pp.147~63 (1990)
- Chadwick RG, "Attempted evaluation of three porcelainrepair system", 25, pp.610~5 (1998)
- Leibrock A, "In vitro study ofthe effect of thermo- and load-cycling onthe bond strength of porcelain repair systems", 26, pp.130~7 (1999)
- Hisamatsu N, "Effect of silane primers and unfilled resinbonding agents on repair bond strength ofa prosthodontic microfilled composite", 29, pp.633~8 (2002)
- Mclean JW, "The science and art of dentalceramics The nature of dental ceramicsand their clinical use", 1 (1979)
- Asmussen E, "Factors affecting the color stabilityof restorative resins", 41, pp.11~8
- Germain HS, "Properties of microfilledcomposite resins as influenced byfiler content", 64, pp.155~60 (1985)
- Oysaed H, "Water sorptionand filler characteristics of compositesfor use in posterior teeth", 65, pp.1315~8
- Venz S, "Effect of photoacceleratorson curing and discoloraton of comporites", 3, pp.244~6 (1987)
- Powers JM, "Color stability of restorative resins underaccelerated aging", 57, pp.964~70 (1978)
- Ruyter IE, "Color stabilityof dental composite resin materialsfor crown and bridge veneers", 3, pp.246~51
- Gross MD, "A colorimetric studyof coffee and tea staining of four compositeresins", 4, pp.311~22 (1977)
- Um CM, "Staining of resinbasedveneering materials with coffe andtea", 22, pp.377~86 (1991)
- Raptis CN, "Staining of composite resins by cigarettesmoke", 9, pp.367~71 (1982)
- Brauer GM, "Color changes of compositeson exposure to various energy sources", 4, pp.55~9 (1988)
- Seghi RR, "Spectrophotometric analysisof color differences between porcelain systems", 56, pp.35~40 (1986)
- Seghi RR, "Effects of instrument-measuringgeometry on colorimetric assessmentsof dental porcelains", 69, pp.1180~3 (1990)
- Eldiwany M, "Color stability of light-cured and post-curedcomposites", 8, pp.179~81 (1995)
- O’Brien WJ, "Anew,small color difference equation for dentalshade", 69, pp.1762~4 (1990)
- Wozniak WT, "Proposed guidelines for theacceptance program for dental shadeguides", pp.1~2 (1987)
- Cook WD, "Color stability andvisual perception of dimethacrylate baseddental composite resins", 6, pp.257~64 (1985)
- Ferracane JL, "Ultraviolet light induced yellowing of dentalrestorative resins", 54, pp.483~7
- Powers JM, "Color stability and agingof plastic veneering materials", 60, pp.1692~6 (1981)
- Powers JM, "Colorand optical properties of posterior compositesunder accelerated aging", 1, pp.62~7 (1985)
- Powers JM, "In vitrocolor change of posterior composites", 4, pp.151~4 (1988)
- Satou N, "In vitro color change of composite-based resins", 5, pp.384~7 (1989)
- Wozniak WT, "Photographic assessment ofcolor changes in cold and heat-cure resins", 8, pp.333~9 (1981)
- Dietschi D, "Comparison of the color stability of tennew-generation composites:an in vitrostudy", 10, pp.353~62 (1994)
- Cooley RL, "Fluoride release and color stability of a fluoride-containing composite resin", 19, pp.899~904 (1988)
- Stober T, "Color stabilityof highly filled composite resin materialsfor facings", 17, pp.87~94 (2001)
- Asmussen E, "Factors affecting the color stabilityof restorative resins", 41, pp.11~8
- Craig RG, "Chemistry,composition,andproperties of composite resin", 25, pp.219~39 (1981)