본문 바로가기
KERD
논문KCI 등재

도재 수리 시스템의 전단결합강도에 관한 연구

Shear Bond Strength of Porcelain Repair Systems

조인호|우수
대한턱관절교합학회 (Korean academy of stomatognathic function and occlusion)|2006.09|구강회복응용과학지 (Journal of Dental Rehabilitation and Applied Science)|제22권 제3호|pp. 211-220

2

조회

0

다운로드

0

인용

0

참고문헌

주제분류치의학

초록

Abstract

Shear Bond Strength of Porcelain Repair Systems Soo Woo, Soo-Youn Shin, In-ho Cho Department of Prosthodontics, Collage of Dentistry, Dankook University Need of porcelain-repair system is largely demanding as dental porcelain restorations are increased in clinical dentistry. This study investigated shear bond strength of commercial porcelain-repair systems on dental porcelain and their reliability. Experimental groups were as follows; Group A Super Bond C&B, Group B Porcelain repair kit, Group C Ceramic repair, and Group D Spectrum system as a control. Porcelain disks were fired and embedded in epoxy resin. Porcelain surface were ground using 220 grit SiC disk, then cleaned in ultrasonic bath. Then porcelain specimens were treated with each repair system. A clear polystyrene cylinder 3.5 mm in internal diameter was filled with composite resin. Then the resin cylinder was polymerized with a visible light curing unit. Thirty one specimens at each group were prepared and stored at 37℃ distilled water for 48 h. Specimens were tested in an Instron testing machine according to ISO TR 11405. Mean shear bond strength and standard deviation of each group was 15.7±4.1 MPa (Group A), 12.8±4.9 MPa (Group B), 7.2±3.0 MPa (Group C) and 9.6±2.2 MPa (Group D). ANOVA and Tukey HSD post-hoc test showed that there were significant differences between groups (p<0.05). Data of bond strength were analyzed with two-parameter Weibull distribution. Confidence interval of Weibull modulus (m-parameter) at 95% of Group A (3.5-6.3) and Group D (3.6-6.0) were significantly higher than Group B (2.2-3.7) and Group C (2.0-3.4). There was little correlation between mean shear bond strength and Weibull modulus. Results indicated that acid-etching of porcelain surface increased porcelain-resin shear bonding strength.

참고문헌 (31)

  1. "A new porcelain repair system with a silane coupler", pp.813~8
  2. "Bond strength and microleakage of porcelain repair material", 54(6), pp.788~91 (1985)
  3. "Long-term clinical study of porcelain-fused-to gold restoration", 52(3), pp.338~42 (1984)
  4. "Repair of fractured porcelain denture teeth", 29(21), pp.228~30 (1973)
  5. "Repair technique for porcelain-fused-metal restorations", 38(1), pp.61~5 (1977)
  6. "Properties of a silica-reinforced polymer for dental restorations", 66(1), pp.57~61 (1963)
  7. "Composite resin bonded to porcelain with silane solution", 96(2), pp.288~91 (1978)
  8. "Silane bonding porcelain teeth to acrylic", 76(1), pp.69~73 (1968)
  9. "Composite resin repair of porcelain denture teeth", 38(6), pp.673~9 (1977)
  10. "Effect of porcelain surface treatment on the bond to composite", 60(3), pp.288~91 (1988)
  11. "Attempted evaluation of three porcelain repair systems - what are we really testing?", 25(8), pp.610~615 (1998)
  12. "Tensile bond strength of etched porcelain", pp.297~81
  13. "Porcelain laminate veneers bonded to etched enamel", 27(4), pp.671~84 (1983)
  14. "Effect of ceramic surface treatments on the bond of four resin luting agents to a ceramic material", 79(5), pp.508~513 (1998)
  15. "Repair of porcelain-fused-to-metal restorations", 41(6), pp.661~4 (1979)
  16. "Evaluation of the bonding of three porcelain repair systems", 46(5), pp.516~8 (1981)
  17. "Bond strengths of intraoral porcelain repair materials", 61(3), pp.305~9 (1989)
  18. "Weibull parameters of composite resin bond strengths to porcelain and noble alloy using the Rocatec system", 18(5), pp.389~395 (2002)
  19. "retention after one year School of Dentistry", pp.75 330~7 180, Dankook University
  20. "Effect of coupling agents on bond strength of etched porcelain", 63(2), pp.179~82 (1984)
  21. "Tensile bond strengths of five porcelain repair systems", 13(4), pp.162~7 (1988)
  22. "Restorative resin retention of surface treatment of PFM repair", 30(1), pp.73~84 (1992)
  23. "Shear bond strength of composite resin porcelain repair materials bonded to metal and porcelain", 64(5), pp.529~33 (1990)
  24. "Effectiveness of porcelain repair systems", 42(3), pp.292~4 (1979)
  25. "Shear strength of the composite bond to etched porcelain", 66(9), pp.1460~5 (1987)
  26. "Adhesive monomer for porcelain repair", 2(9), pp.483~9 (1989)
  27. "Shear bond strength of composite resin to porcelain", 4(1), pp.17~23 (1991)
  28. "Effects of topical fluorides on five low-fusing dental porcelain", 52(3), pp.340~3 (1984)
  29. "Ceramic surface preparations for bonding", 11(6), pp.276~280 (1998)
  30. "Effect of silane primers and unfilled resin bonding agents on repair bond strength of a prosthodontic microfilled composite", 29(7), pp.644~648 (2002)
  31. "Repairing fractured porcelain", 127(2), pp.203~209 (1996)

관련 논문AI추천

파절된 도재면에 대한 수종의 도재 수리시스템의 인장결합강도김지혜, 박주미, 송광엽, 양병덕, 전영아대한치과보철학회 · 대한치과보철학회지2005 · 제43권 제2호수리된 복합레진 수복물의 전단결합강도 연구윤창, 김선호, 오원만, 정선와, 최수영, 황윤찬, 황인남대한치과보존학회 · Restorative Dentistry and Endodontics2002 · 제27권 제6호레진 인공치아의 재부착 방법에 따른 전단결합강도에 관한 연구김익중, 이종혁, 조인호대한턱관절교합학회 · 구강회복응용과학지2005 · 제21권 제2호지르코니아 세라믹과 레진 시멘트의 결합강도김지혜, 박주미, 복원미, 송광엽, 장문숙, 조석규대한치과보철학회 · 대한치과보철학회지2005 · 제43권 제4호다양한 산처리 방법이 lithium Disilicate 도재와 복합레진간의 전단 결합강도에 미치는 영향강대현, 복원미, 송광엽, 송진원, 안승근대한턱관절교합학회 · 구강회복응용과학지2006 · 제22권 제2호불산 처리 시간이 강화형 전부도재관과 레진 시멘트의 전단 결합강도에 미치는 영향김경일, 박찬운, 안승근, 최근배대한치과보철학회 · 대한치과보철학회지2004 · 제42권 제5호

이 간행물의 다른 논문 (6건)

도재 전장 금관용 비귀금속 합금의 결합강도에 관한 연구이종혁, 조인호, 김철만pp. 203-210지르코니움 세라믹에서 표면 처리 방법이 레진 시멘트의 접착력에 미치는 영향조인호, 박경석pp. 221-230상아질 지각과민 완화법이 접착용 시멘트의 전단결합강도에 미치는 영향박인호, 조인호pp. 231-242IPS-Empress system을 이용한 상악 중절치의 치관복제술신영호, 오상천pp. 243-2502차원 유한요소분석을 이용한 임플란트 보철물의 적합도 분석박찬제, 이석형, 권호범pp. 251-260
원문 보기