임플랜트 상부구조의 재료가 반복하중 후 나사풀림에 미치는 영향

참고문헌 (33)

1. "Osseointegration and its ex-perimental back ground", 50, pp.397~
2. "Forces and moments onBranemark Implants", 4, pp.241~247 (1989)
3. "Loads and designs ofscrew joints for single crowns supported byosseointegrated implants", 7, pp.353~9 (1992)
4. "Loose gold screws fre-quently occur in full-arch fixed prosthesessupported by osseointegrated implantsafter 5years", 9, pp.168~178
5. "Complications and maintenance require-ments for fixed prostheses and overdenturesin edentulous mandible:a 5-year re-port", 9, pp.191~196 (1994)
6. "The longitudinalclinical effectiveness of osseointegrateddental implants"
7. "Implant treatment inedentulous maxillae:a 5-year follow-upreport on patients with different degreesof jaw resorption", 10, pp.303~311 (1995)
8. "Osseointegratedimplants for single tooth replacement:A1-year report from a multicenter prospec-tive study", 6, pp.29~ (1991)
9. "A six year prosthodontic study of 509consecutively inserted implants for thetreatment of partial edentulism", 67, pp.236~245 (1992)
10. "Implant screw me-chanics", 42, pp.71~89 (1998)
11. "Torque data for socket-headcap screws", feb, pp.3~4 (1988)
12. "An introduction to the design246and behavior of bolted joints" (1981), Inc
13. "Ceramic abutment-a new era in achievingoptimal esthetics in implant dentistry", 20, pp.81~91 (2000)
14. "Zirconia as a ceramicbiomaterial", 20, pp.1~25 (1999)
15. "Evolution and use ofaluminum oxide single-tooth implantabutment : A short review and presenta-tion of two cases", 15, pp.488~493 (2002)
16. "Alumina Ceramic Implantabutments used for single-tooth replace-ment: A prospective 1- to 3-year Multi-center study", 14, pp.432~438 (2001)
17. "A study on the fracture strengthof implant-supported restorations usingmilled ceramic abutments and all-ceram-ic crowns", 15, pp.9~13 (2002)
18. "Mechanical testing ofsuperstructures on the CeraOne abut-ment in the Branemark system", 9, pp.665~672 (1994)
19. "In vivo fracture re-sistance of implant-supported all-ceram-ic restorations", 90(4), pp.325~331 (2003)
20. "Mechanical properties, phasestability,and biocompatibility of(Y,Nb)-TZ P", Al(2)O(3) composite abutments for den-tal implant, 2000, pp.53(4), 438~443
21. "Restorative dentalmaterials", pp.68~69 (2002), St. Louis: Mosby
22. "In vivo vertical forces on im-plants", 10, pp.99~108 (1995)
23. "Bruxism", 13, pp.659~65
24. "Limits of human bitestrength", pp.226~229
25. "Bite forces with mandibular implant-retained overdenture", 77, pp.1832~1839 (1998)
26. "Wave analysis of implant screwloosening using an air cylindrical cyclicloading device", 88, pp.402~408 (2002)
27. "The new restorative concept of theITI dental implant system:design and en-gineering", 13, pp.409~431
28. "Assessment of coldwelding properities of the internal conicalinterface of the commercially availableimplant systems", 81(2), pp.159~166 (1999)
29. "Effect of repeated closures onopening torque values in seven abut-ment-implant systems", 84(2), pp.194~199 (2000)
30. "Effect of washers on reverse torque dis-placement of dental implant gold retain-ing screws", 82, pp.312~316 (1999)
31. "Keeping implant screwstight", 72, pp.628~ (1994)
32. "A silicone obturator for the ac-247cess canal in an implant-retained fixed pros-thesis"
33. "Fracture toughness(KIc)of a dental porce-lain determined by fractographic analysis", 15, pp.342~348 (1999)

관련 논문AI추천