염화수화물용액 침지법으로 제작한 유색 지르코니아와 전장도재의 전단결합강도
Shear bond strength of veneer ceramic and colored zirconia by using aqueous metal chloride solutions
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
연구목적: 본 연구의 목적은 금속염화물 용액 내 침지법으로 제작된 유색 지르코니아 블록의 임상적 응용을 타진해보기 위해 지르코니아 코어와 전장도재간의 전단결합강도를 평가하고자 함이다. 연구 재료 및 방법: 지르코니아 블록은 자체 제작한 것과 시판되는 제품을 이용하였다. 색소체 용액으로 크로뮴과 몰리브데늄을 포함하는 3가지 염화수화물 용액을 제조하였고, 대조군으로 상용되고 있는 색소체 용액을 준비하였다. 가로 5 mm, 세로 5 mm, 높이 10 mm의 직육면체 지르코니아 시편을 블록마다 40개를 제작하였고, 시편을 임의로 5개 그룹으로 나누어 색소체 용액에 침지하여 유색 지르코니아를 제작한 후, 도재를 가로 5 mm, 세로 5 mm, 높이 4 mm의 직육면체가 되도록 축성하고 소결하였다. 시편의 최대 하중값과 전단결합강도를 측정하고 파절된 시편의 파절면과 파절 양상을 검사하였다. 결과: 1. 지르코니아 블록간의 전단결합강도는 통계학적으로 차이를 보이지 않았다 (P > .05). 2. 무색 지르코니아와 유색 지르코니아 간의 전단결합강도는 무색이 높은 경향을 보였으나 통계학적으로 유의한 차이는 보이지 않았다 (P > .05). 3. 유색 지르코니아의 전단결합강도 비교 시 색소체 용액의 종류에 따른 통계학적인 차이는 보이지 않았다 (P > .05). 4. 지르코니아와 전장도재간의 파절은 주로 혼합성 파절 양상이 관찰되었다. 모든 시편의 전장도재 파절은 지르코니아와의 계면이나 전장도재내에서 관찰되었으며 지르코니아의 응집성 파절은 보이지 않았다. 결론: 유색 지르코니아와 전장도재의 전단결합강도는 무색 지르코니아보다 더 낮은 경향을 보였지만, 관찰된 수치는 임상적으로 허용 가능한 것으로 사료된다.
Abstract
Purpose: The purposes of this study was to evaluates shear bond strength between zirconia core and veneer-ceramic in order to examine the clinical practice of colored zirconia block fabricated by infiltration method into the metal chloride solution. Material and methods: CNU block and Everest(R). ZS blank were used. VITA In-Ceram(R) 2000 YZ Coloring liquid (LL1) and 3 aqueous metal chloride solutions containing chromium and molybdenum ingredients were used. 40 zirconia specimens were prepared into cuboid shape (5 × 5 × 10 mm). All specimens were divided into 5 groups by infiltrating into the coloring liquids. After that, porcelain was build up into the shape of 5 × 5 × 4 mm, followed by sintering. The maximum loading and shear bond strength was measured. Failure patterns and failure sites were examined. Results: 1. There were no statistical differences in shear bond strength between zirconia blocks (P > .05). 2. There were no statistically significant differences in shear bond strength between non-colored and colored zirconia blocks, while shear bond strength of non-colored zirconia blocks is higher than that of colored specimen (P > .05). 3. In the comparison with shear bond strength among colored zirconia blocks, there were no statistical differences according to kinds of coloring liquid (P > .05). 4. Mixed failure patterns were mainly observed in the failure between zirconia and veneering ceramic. The veneering ceramic failure of all specimens was observed in either interface of zirconia or veneering ceramic. Conclusion: Shear bond strength between colored zirconia and veneering ceramic shows lower tendency than non-colored zirconia, but there was clinically allowable value.
참고문헌 (29)
- Piconi C, "Review zirconia as a ceramic biomaterial", Biomaterials, 20, pp.1~25 (1999)
- Guazzato M, "Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part I. Pressable and alumina glass-infiltrated ceramics", Dent Mater, 20, pp.441~448 (2004)
- Kim JY, "Toughness Mechanism and Manufacturing Process of ZrO2 Ceramics", Bull Kor Ceram Soc, 7, pp.80~88 (1992)
- Standard OC, "Densification of Zirconia-conventional methods", Key Eng Mater, pp.251~300 (1998)
- Wang H, "Strength influencing variables on CAD", CAM zirconia frameworks, 2008, pp.24, 633~638
- Meyenberg KH, "Zirconia posts: A new all-ceramic concept for nonvital abutment teeth", J Esthet Dent, 7, pp.73~80 (1995)
- Luthardt R, "Design and production of dental prosthetic restorations: basic research on dental CAD", CAM technology, 2002, pp.5, 165~176
- Wohlwend A, "The zirconium oxide abutment: An all-ceramic abutment for the esthetic improvement of implant super structures", Quintessence Dent Technol, 1, pp.63~74 (1997)
- Keith O, "Zirconia brackets: an evaluation of morphology and coefficients of friction", Am J Orthod Dentofacial Orthop, 106, pp.605~614 (1994)
- Denry I, "State of the art of zirconia for dental applications", Dent Mater, 24, pp.299~307 (2008)
- Sundh A, "Fracture resistance of all-ceramic zirconia bridges with differing phase stabilizers and quality of sintering", Dent Mater, 22, pp.778~784 (2006)
- Aboushelib MN, "Microtensile bond strength of different components of core veneered all-ceramic restorations", Dent Mater, 21, pp.984~991 (2005)
- Heffernan MJ, "Relative translucency of six all-ceramic systems. PartⅡ: core and venner materials", J Prosthet Dent, 88, pp.10~15 (2002)
- Braga RR, "Influence of time and adhesive system on the extrusion shear strength between feldspathic porcelain and bovine dentin", Dent Mater, 16, pp.303~310 (2000)
- Al-Shehri SA, "Influence of lamination on the flexural strength of a dental castable glass ceramic", J Prosthet Dent, 76, pp.23~28 (1996)
- Isgro G, "The influence of the veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramic", J Prosthet Dent, 90, pp.465~473 (2003)
- De Jager N, "The influence of design parameters on the FEA-determined stress distribution in CAD-CAM produced all-ceramic dental crown", Dent Mater, 21, pp.242~251 (2005)
- Oh GJ, "Sintering behavior and mechanical properties of zirconia compacts for dental application", 석사, Department of Dental Science, pp.2008
- Southan DE, "Faulty in porcelain jacket crowns", Aust Dent J, 17, pp.436~440 (1972)
- Beuer F, "Flexural strength and coloured and aged zirconia", 2004 IADR; abstract no 0113, ~ (2004)
- Cales B, "Colored zirconia ceramics for dental applications", Bioceramics, 11, pp.591~594 (1998)
- Shah K, "Effect of coloring with various metal oxides on the microstructure, color, and flexural strength of 3YTZP", J Biomed Mater Res B Appl Biomater, 87, pp.329~337 (2008)
- Bhushan S, "Coloration of partially stabilized zirconia", 2005 IADR; abstract no 1775, ~ (2005)
- Craig RG, "Mechanical properties in restorative dental materials. 11th ed", pp.551~592 (2002), Mosby
- Al-Dohan HM, "Shear strength of core-veneer interface in bi-layered ceramics", J Prosthet Dent, 91, pp.349~355 (2004)
- Dundar M, "Bond strengths of veneering ceramics to reinforced ceramic core materials", Int J Prosthodont, 18, pp.71~72 (2005)
- Gremillard L, "Microstructural study of silica-doped zirconia ceramics", Acta Mater, 48, pp.4647~4652 (2000)
- Mecartney M, "Influence of an amorphous second phase on the properties of yttria-stabilized tetragonal zirconia polycrystals (Y-TZP)", J Am Ceram Soc, 70, pp.54~58 (1987)
- Tsubakino H, "Effect of alumina addition on the tetragonal-to-monoclinic phase transformation in zirconia- 3 mol % yttria", J Am Ceram Soc, 74, pp.440~443 (1991)