임플란트 단일 치아 수복 시 수직 침하와 인접치와의 위치 변화: 증례 보고
Axial displacement in single-tooth implant restoration: Case report
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
여러 연구에서 임플란트 지지 보철물의 수직 침하에 대해 보고되고 있지만, 구강내 임플란트 지지보철물의 기능 시 수직침하 양상에 대해서는 알려진 바 없다. 본 증례에서는 2명의 환자에서 구치부 단일 치아 임플란트 지지 보철물의 3차원적인 변화를 평가하였다. 내부연결형 임플란트를 식립하였으며 통상적인 방법으로 Screw-Cement Retained Prosthesis (SCRP) 형태의 보철물을 제작해 장착하였다. 구강 스캐너(Cerec Omnicam, Dentsply Sirona, USA)를 이용해 보철물 장착 시, 장착 1주, 1개월, 1년 후 구강 스캔을 시행하였으며 디지털 분석 프로그램(Geomagic Control X, 3D systems, USA)을 이용해 기간에 따른 위치 변화를 3차원적으로 평가하였다. 인접 치아를 기준으로 보철물 장착 후 임상적인 위치 변화가 나타났으며 변화량은 시간이 지남에 따라 증가하였다.
Abstract
Axial displacement of an implant-supported prosthesis is frequently reported in clinical and laboratory studies. However, limited information is available about the behavior of the axial displacement of implant-supported prostheses functioning in intraoral situations. The present case report evaluated the three-dimensional displacement of posterior single implant-supported prostheses in 2 different patients. Internal connection type implants were placed, and screw and cement-retained prosthesis (SCRP) type prosthesis were delivered after an appropriate healing period. Intraoral digital scans were performed using an intraoral scanner (Cerec Omnicam, Dentsply Sirona, USA) on the day of crown delivery and one week, one month, and one year after delivery. The amount of 3-dimensional displacement of the prosthesis was evaluated by using a digital inspection software (Geomagic Control X, 3D systems, USA). The axial displacement of implant-supported prosthesis occurred in both patients. Furthermore, the amount of displacement increased over time.
참고문헌 (17)
- Brånemark PI, "Osseointegrated implants in the treatment of the edentulous jaw. Experience from a 10-year period", Scand J Plast Reconstr Surg Suppl, 16, pp.1~132 (1977)
- Jemt T, "Fixed implant-supported prostheses in the edentulous maxilla. A five-year follow-up report", Clin Oral Implants Res, 5, pp.142~147 (1994)
- Adell R, "A 15-year study of osseointegrated implants in the treatment of the edentulous jaw", Int J Oral Surg, 10, pp.387~416 (1981)
- Polymeri A, "Occlusal migration of teeth adjacent to implant prostheses in adults : A long-term study", Int J Oral Maxillofac Implants, 35, pp.342~349 (2020)
- Maeda Y, "In vitro differences of stress concentrations for internal and external hex implant-abutment connections : a short communication", J Oral Rehabil, 33, pp.75~78 (2006)
- Khraisat A, "Fatigue resistance of two implant", abutment joint designs, 2002, pp.88, 604~610
- Merz BR, "Mechanics of the implant-abutment connection : an 8-degree taper compared to a butt joint connection", Int J Oral Maxillofac Implants, 15, pp.519~526 (2000)
- Bozkaya D, "Mechanics of the tapered interference fit in dental implants", J Biomech, 36, pp.1649~1658 (2003)
- Lemos CAA, "Comparison of external and internal implant-abutment connections for implant supported prostheses. A systematic review and meta-analysis", J Dent, 70, pp.14~22 (2018)
- Dailey B, "Axial displacement of abutments into implants and implant replicas, with the tapered cone-screw internal connection, as a function of tightening torque", Int J Oral Maxillofac Implants, 24, pp.251~256 (2009)
- 설현우, "Effect of cyclic loading on axial displacement of abutment into implant with internal tapered connection: a pilot study", 대한치과보철학회지, 51(4), pp.315~322 (2013), 대한치과보철학회[DOI]
- Jörnéus L, "Loads and designs of screw joints for single crowns supported by osseointegrated implants", Int J Oral Maxillofac Implants, 7, pp.353~359 (1992)
- Kim KS, "Variation in the total lengths of abutment", implant assemblies generated with a function of applied tightening torque in external and internal implant-abutment connection, 2011, pp.22, 834~839
- 김성준, "Digital evaluation of axial displacement by implant-abutment connection type: an in vitro study", The Journal of Advanced of Prosthodontics, 10(5), pp.388~394 (2018), 대한치과보철학회[DOI]
- Lee JH, "Axial displacements in external and internal implant-abutment connection", Clin Oral Implants Res, 25, pp.e83~e89 (2014)
- Siamos G, "Relationship between implant preload and screw loosening on implant-supported prostheses", J Oral Implantol, 28, pp.67~73 (2002)
- Hyeon JM, "A quantitive analysis of settling effect in internal tapered connection implants after cyclic loading using 858 Bionix II", Korean Acad Oral Maxillofac Implantology, 19, pp.2~9 (2015)