Fracture strength of ceromer crowns supported on the various abutment core materials
1
조회
0
다운로드
0
인용
0
참고문헌
초록
Abstract
Statement of problem. The effects of various core buildup materials which differs in the mechanical properties on the fracture strength of metal-free crowns is unknown. Purpose. This study was carried out to evaluate the fracture strengths of Artglass ceromer crowns supported by 3 different core materials in clinically simulated anterior tooth preparation. Material and methods. Ten crowns from each group were constructed to comparable dimensions on the various dies made by gold alloy, Ni-Cr alloy, and composite resin. The ten crowns were then cemented onto the dies and loaded until catastrophic failure took place. Fracture resistance to forces applied to the incisal edges of the anterior crowns supported by three types of dies was tested. Results. The ceromer crowns on the composite resin dies fractured at significantly lower values( 287.7 N) than the ceromer crowns on the metal dies(approximately 518.4 N). No significant difference was found between the fracture values of the ceromer crowns on the dies of gold alloy and Ni-Cr alloy. Conclusion. The failure loads of the ceromer crowns on the metal dies were almost the same and not affected by the differences of casting alloys. However, the fracture values of the ceromer crowns on the resin dies were significantly reduced by the relative weak properties of composite resin core material.
참고문헌 (27)
- "Flexural properties of acrylic resinpolymers reinforced with unidirectional and wovenglass fibers", 81, pp.318~26 (1999)
- "Development and clinical applications oflight-polymerized fiber-reinforced composite", 80, pp.311~8 (1998)
- "Evaluation of cure,propertiesand wear resistance of Artglass dental composite", 11, pp.214~8 (1998)
- "Evaluation of the marginalaccuracy of different all-ceramic crown systems aftersimulation in the artificial mouth", 26, pp.582~93 (1999)
- "Fracture strength of all-ceramiccrowns", 7, pp.329~38 (1994)
- "The fracture resistance ofall-ceramic crowns on supporting structures withdifferent elastic moduli", 6, pp.462~7 (1993)
- "Dental lutingagents: A review of the current literature", 80, pp.280~301 (1998)
- "Influence of glass-ceramic thickness on Hertzianand bulk fracture mechanisms", 11, pp.27~32 (1998)
- "Fracture strength ofthe IPS Empress crown:the effect of occlusaldepth and axial inclination on upper first premolarcrowns", 37, pp.127~33 (1999)
- "A comparative strength study of metalceramic and all-ceramic esthetic materials:modulusof rupture", 62, pp.476~9 (1989)
- "Effect of convergenceangle on retention of resin-bonded retainers cementedwith resinous cements", 77, pp.475~81 (1997)
- "Fatigue testing andmicroscopic evaluation of post and core restorationsunder artificial crowns", 82, pp.341~7 (1999)
- "Survival of In-Ceramcrowns in a private practice:a prospective clinicaltrial", 83, pp.216~22 (2000)
- "Clinical evaluationof all-ceramic crowns (Dicor) in general practice", 81, pp.277~84 (1999)
- "Longtermclinical results of galvano-ceramic and glassceramicindividual crowns", 83, pp.530~4 (2000)
- "Clinically relevant approach to failure testingof all-ceramic restorations", 81, pp.652~61 (1999)
- "Resistance to fracture of metal ceramic and allceramiccrowns", 7, pp.149~54 (1994)
- "The effect of finish line form and lutingagent on the breaking strength of Dicor crowns", 6, pp.286~90 (1993)
- "Maximising the fracture resistance of dentine-bonded all-ceramic crowns", 27, pp.169~73 (1999)
- "Load fatigue of fiverestoration modalities in structurally compromisedpremolars", 8, pp.213~20 (1995)
- "Compressive and tensile zones in the cementinterface of full crowns:a technical note on the conceptof resistance", 8, pp.80~91 (1999)
- "Fracturetoughness of various core build-up materials", 9, pp.14~8 (2000)
- "The effect of variations in bonding procedureon fracture resistance of dentin-bondedall-ceramic crowns", 26, pp.293~300 (1995)
- "Strength of a dental glass-ceramicafter surface coating", 9, pp.274~9 (1993)
- "The relationship between maximal bite forces, and facial morphology duringgrowth.", pp.323~31
- "A novel bite force recorderand maximal isometric bite force values for healthyyoung adults", 101, pp.1711~5 (1993)
- "Occlusal forces duringchewing and swallowing as measured by soundtransansmission", 46, pp.443~9 (1981)