본문 바로가기
KERD
논문KCI 등재

전해질 농도가 양극산화에 열수처리한 Ti-6AI-7Nb 합금의 표면 특성에 미치는 영향

EFFECT OF ELECTROLYTE CONCENTRATION ON THE SURFACE CHARACTERISTICS OF ANODIZED AND HYDROTHERMALLY-TREATED TI-6AL-7NB ALLOY

송광엽|배태성|장태엽
대한치과보철학회 (The Korean Academy Of Prosthodontics)|2005.10|대한치과보철학회지 (The Journal of Korean Academy of Prosthodontics)|제43권 제5호|pp. 684-693

0

조회

0

다운로드

0

인용

0

참고문헌

주제분류치의학

초록

Abstract

Statement of problem: Ti-6Al-7Nb alloy is used instead of Ti-6Al-4V alloy that was known to have toxicity. Purpose: This study was performed to investigate the effect of electrolyte concentration on the surface characteristics of anodized and hydrothermally-treated Ti-6Al-7Nb alloy. Materials and methods: Discs of Ti-6Al-7Nb alloy of 20 ㎜ in diameter and 2 ㎜ in thickness were polished sequentially from #300 to 1,000 SiC paper, ultrasonically washed with acetone and distilled water for 5 min, and dried in an oven at 50℃ for 24 hours. Anodizing was performed at current density 30 ㎃/㎠ up to 300 V in electrolyte solutions containing β-glycerophosphate disodium salt hydrate (β-GP) and calcium acetate (CA). Hydrothermal treatment was conducted by high pressure steam at 300℃ for 2 hours using a autoclave. All samples were soaked in the Hanks’solution with pH 7.4 at 36.5℃ for 30 days. Results and conclusion: The results obtained were summarized as follows; 1. After hydrothermal treatment, the precipitated HA crystals showed the dense fine needle shape. However, with increasing the concentration of electrolyte they showed the shape of thick and short rod. 2. When the dense fine needle shape crystals was appeared after hydrothermal treatment, the precipitation of HA crystals in Hanks’solution was highly accelerated. 3. The crystal structures of TiO2 in anodic oxide film were composed of strong anatase peak and weak rutile peak as analyzed with thin-film X-ray diffractometery. 4. The Ca/P ratio of the precipitated HA layer was equivalent to that of HA crystal in Hanks’solution.

참고문헌 (40)

  1. "Metal selection andsurface characteristics", pp.99~116 (1985), BranemarkPI Osseointegrationin clinical dentistry
  2. "Comparison of bone-implant in-terface shear strength of soild hydrox-yapatite and hydroxyapatite-coated tita-nium implants", 27, pp.557~563 (1993)
  3. "Microdissolution of calcium ions from cal-cium-ion- implanted titanium", 38, pp.1579~1594 (1996)
  4. "Mechanicaland histological investigation of hy-drothermally treated and untreated anodictitanium oxide films containing Ca and P", 29, pp.1459~68 (1995)
  5. "Hydroxyapatite coating", 235, pp.220~223 (1988)
  6. "Theshear strength and failure mode of plasma-sprayed hydroxyapatite coating to bone:theeffects of coating thickness", 27, pp.1315~1327 (1993)
  7. "Spontaneous apatite formation onchemically surface treated Ti", 79, pp.1127~1129 (1996)
  8. "Bonding of chemicallytreated titanium implants to bone", 37, pp.267~275 (1996)
  9. "Bonding strength of bonelike apatite lay-er to Ti metal substrate", 38, pp.121~127 (1997)
  10. "Effect of potassium hydroxide treatment oftitanium implant on the precipitation of cal-cium phosphate and tissue compatibility", 28, pp.223~233 (2001)
  11. "X-rayphotoelectron spectroscopy of calcium-ion-implanted titanium", 63, pp.347~354 (1993)
  12. "Structure of surface-modified layers ofcalcium-ion-implanted Ti-6Al-4V and Ti-56Ni", 36, pp.438~444 (1995)
  13. "Structuralanalysis of hydroxyapatite coating on ti-tanium", 7, pp.97~103 (1986)
  14. "Effect of temper-ature on morphology of electrochemically-deposited calcium phosphates", 15, pp.31~38 (1996)
  15. "Effect of electrochemical treatmentof titanium on the precipitation of calciumphosphate in a simulated body fluid", 29, pp.263~269 (2002)
  16. "Formation andcharacterization of anodic titanium oxidefilms containing Ca and P", 29, pp.65~72 (1995)
  17. "Characterization ofthin hydroxyapatite layers formed on an-odic titanium oxide films containing Ca andP by hydrothermal treatment", 29, pp.1071~1079 (1995)
  18. "In vitro and in vi-vo behavior of Ca- and P-enriched anodizedtitanium", 20, pp.1587~1594 (1999)
  19. "Studies on polishing of Ag-Pd-Cu-Au al-loy with five dental abrasives", 28, pp.773~777 (2001)
  20. "Clinical Applicationof titanium crowns", 30, pp.317~328 (1989)
  21. "Application ofpure titanium to metal framework", 42, pp.547~558 (1998)
  22. "Electrochemical characterizationof cast titanium alloys", 24, pp.213~218 (2003)
  23. "Wear properties of Tiand Ti-6Al-7Nb castings for dental prothe-ses", 24, pp.1519~1524 (2003)
  24. "The use of titanium for medicalapplications in the USA", 213, pp.134~137 (1996)
  25. "Titanium alloys in to-tal joint replacement-a materials scienceperspective", 19, pp.1621~1639 (1998)
  26. "Mechanical properties of bio-medical titanium alloys", pp.231~236 (1998)
  27. "Characterization of surfacefilms formed on titanium in electrolytic so-lutions", 8, pp.832~844 (1989)
  28. "Preparationand surface spectroscopic characteriza-tion of oxide film on Ti-6Al-4V", 35, pp.283~301 (1989)
  29. "The cor-rosion behaviour of Ti-6Al-4V,Ti-6Al-7Nb and Ti-13Nb-13Zr in protein solutions", 20, pp.631~637 (1999)
  30. "Fatigue performance and cy-to-toxity of low rigidity titanium alloy", nii(mi m), pp.2673~2683
  31. "Elastic prop-erty of Ti-6Al-7Nb alloy castings for re-movable partial denture Proceedings of the5th ISTD" (2001)
  32. "Development of titanium alloys withhigh corrosion resistance in fluoride con-taining solution Proceedings of the 5thISTD" (2001)
  33. "Influenceof surface characteristics on bone integrationof titanium implants", 25, pp.889~902 (1991)
  34. "Characterizationof anodic spark-converted titanium surfacesfor biomedical applications", characterizatio(f adic spark-converted titanium surfacesfor biomedical applications), pp.453~457
  35. "Requirements for ensuring along lasting direct bone-to-implant an-chorage in man", pp.155~170 (1981), Branemark P-I
  36. "Effect of grooved titanium coated implantsurface on epithelial cell behavior in vit-ro and in vivo", 23, pp.1067~85 (1989)
  37. "New aspects of biocom-pability Motion at the interface", pp.297~302 (1990), Elsevier SciencePublishers BV
  38. "Formation of a high-strength bioactiveglass-ceramic in the system MgO-CaO-SiO2-P2O5", 21, pp.536~540 (1986)
  39. "Comparisonon the calcium phosphate precipitation ofNaOH-treated titanium and bioglass-ce-ramic CaO-P2O5 system", 28, pp.247~252 (2001)
  40. "Comparisonon the calcium phosphate precipitation ofNaOH-treated titanium and bioglass-ce-ramic CaO-P2O5 system", 28, pp.247~252 (2001)

관련 논문AI추천

양극산화와 열수처리한 Ti-6Al-7Nb 합금의 표면 특성김문영, 배태성, 송광엽대한턱관절교합학회 · 구강회복응용과학지2005 · 제21권 제1호양극산화와 열수처리한 Ti-6Al-7Nb 합금의표면특성김문영, 배태성, 송광엽대한턱관절교합학회 · 구강회복응용과학지2006 · 제22권 제1호Nb이 첨가된 Ti합금의 미세 조직 및 산화 거동김수학, 박범수, 윤계림, 이경구, 이광민, 이도재, 전충극한국표면공학회 · 한국표면공학회지2004 · 제37권 제1호나노튜브 TiO_2 층 생성 후 전석회화 처리한Ti-6Al-7Nb 합금의 생체활성도서재민대한치과보철학회 · 대한치과보철학회지2011 · 제49권 제01호Surface Characteristics of Anodized Ti-3wt%, 20wt%, and 40wt%Nb Alloys고영무, 최한철, T. H. Kim한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2009 · 제8권 제4호Ti-8wt.Ta-3wt.Nb합금의 산화특성 및 생체안정성박범수, 박상원, 이경구, 이광민, 이도재한국표면공학회 · 한국표면공학회지2006 · 제39권 제1호

이 간행물의 다른 논문 (8건)

도채층의 두께와 색이 도재수복물의 최종 색조에 미치는 영향이임기, 송진원, 복원미, 안승근, 박찬운, 성동환pp. 587-598표면처리방법에 따른 전기성형금속의 도재결합강도전영찬, 정희찬, 임장섭, 김철, 정창모pp. 599-610CAM Zirconia 완전도재 구조물의 정밀 적합도에 관한 연구전영찬, 정창모, 정희찬, 임장섭, 전미현pp. 611-621Silicone Index Tooth Tray를 이용한 인상체의 체적안정성에 대한 연구이규영, 이근우, 심준성, 최병갑, 정승미pp. 622-632총의치 환자 만족도의 영향요인이석원, 정문규pp. 633-649
원문 보기