2종의 측색기에 의한 도재 색조 재현의 정확성 비교
Comparison on accuracy of porcelain color reproducibility using two colorimeters
1
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
연구 목적: ShadeEye-Ncc dental chroma meter (Shofu Inc., Kyoto, Japan)와 ShadepilotTM system (Degudent Inc., Hanau, Germany)의 도재색조 재현의 정확성을 비교연구하여 보고자 함이다. 연구 재료 및 방법: ShadeEye-Ncc dental chroma meter 와 ShadepilotTM system 을 사용하여 Vitapan 3D Master shade guide의 2M2와 3M2 shade tap.을 측색하고, 이 자료를 통하여 shade guide tap. 형태로 도재시편을 제작한다. 시편제작 시 사용하는 porcelain system은 ShadeEye-Ncc dental chroma meter는 Vintage Halo Porcelain system을, ShadepilotTM system은 VitaOmega900 Porcelain system을 사용한다. 모델인 shade tap.과 제작된 도재시편을 spectrophotometer로 측색하고, 그 결과를 토대로 하여 ΔE를 계산하여, 두 측색기의 정확성을 비교검증하였다. 결과: 1. ShadepilotTM system이 ShadeEye-Ncc dental chroma meter에 비하여 더 적합한 도재색조 재현성을 나타내었다 (P < .05). 2. 모델인 Shade tap.의 shade에 따라서 도재색조 재현성에 차이를 나타내었다. 2M2 shade tap.에 비하여 3M2 shade tap.에서 더 적합한 도재색조 재현성을 나타내었다 (P < .05). 3. 두 측색기 모두에서 제작된 도재시편의 ΔE가 평균4.44 - 6.14로 육안으로 구분 가능한 정도의 색조차이를 보였다. 결론: ShadepilotTM system이 비교적 더 정확한 도재색조 재현성을 나타낸다고 할 수 있으며, ShadeEye-Ncc dental chroma meter를 사용할 때는 치아 전체의 여러 부분에서 측색을 하여 정확성을 높이는 것이 필요하리라 생각된다.
Abstract
Statement of problem: Although the use of colorimeter to improve the accuracy of tooth color measurement has increased, it is real situation that there is almost no comparative study about the accuracy among various colorimeters. Purpose: The purpose of this study is to compare the accuracy of porcelain color reproducibility using ShadeEye-Ncc dental chroma meter (Shofu Inc., Kyoto, Japan) and ShadepilotTM system (Degudent Inc., Hanau, Germany). Material and methods: Color of 2M2 and 3M2 shade tap of Vitapan 3D Master shade guide were measured using the above two colorimeters. Porcelain specimens were fabricated through this data. The porcelain systems used were Vintage Halo Porcelain system with ShadeEye-Ncc dental chroma meter, and VitaOmega900 Porcelain system with ShadepilotTM system. Colors of shade tap models and porcelain specimen were measured with spectrophotometer, and calculated delta E based on the results. Results: The following results were obtained. 1. ShadepilotTM system showed more suitable porcelain color reproducibility compared to ShadeEye-Ncc dental chroma meter (P < .05). 2. The result showed the difference of porcelain color reproducibility according to shade of Shade tap which is model. More suitable porcelain color reproducibility was shown at 3M2 shade tap than at 2M2 shade tap (P < .05). 3. The average of ΔE* of porcelain specimens which was made by the two colorimeters was 4.44-6.14, so the difference of shade was shown through the naked eye. Conclusion: ShadepilotTM system showed more suitable porcelain color reproducibility. When using ShadeEye-Ncc dental chromameter, it will be necessary to improve accuracy through coloring various parts of the whole tooth.
참고문헌 (30)
- Clark EB, "An Analysis of Tooth Color", J Am Dent Ass, 18, pp.2093~2103 (1931)
- Clark EB, "Tooth Color Selection", J Am Dent Ass, 20, pp.1065~1073 (1933)
- Paravina RD, "Color comparison of two shade guides", Int J Prosthodont, 15, pp.73~78 (2002)
- Sproull RC, "Color matching in dentistry. II. Practical applications of the organization of color", J Prosthet Dent, 29, pp.556~566 (1973)
- Grajower R, "Sorin S. Reflectance spectra of natural and acrylic resin teeth", J Prosthet Dent, 36, pp.570~579 (1976)
- Cernavin I, "Effects of chlorine-containing disinfecting compounds on shade guides made of acrylic resin", J Prosthet Dent, 75, pp.574~ (1996)
- Sykora O, "Fabrication of a posterior shade guide for removable partial dentures", J Prosthet Dent, 50, pp.287~288 (1983)
- Macentee M, "Instrumental colour measurement of vital and extracted human teeth", J Oral Rehabil, 8, pp.203~208 (1981)
- Goodkind RJ, "Use of a fiber-optic colorimeter for in vivo color measurements of 2830 anterior teeth", J Prosthet Dent, 58, pp.535~542 (1987)
- 김이경, "수종 도재 색조 선택 시스템의 spectrophotometer를 이용한 색조 재현성 평가", 대한치과보철학회지, 42(5), pp.544~555 (2004), 대한치과보철학회
- Paul S, "Visual and spectrophotometric shade analysis of human teeth", J Dent Res, 81, pp.578~582 (2002)
- 성채련, "ShadeScan™ System을 이용한 인공치의 색조분석", 대한치과보철학회지, 42(4), pp.443~457 (2004), 대한치과보철학회
- McPhee ER, "Light and color in dentistry. Part I--Nature and perception", J Mich Dent Assoc, 60, pp.565~572 (1978)
- Goodkind RJ, "A comparison of Chromascan and spectrophotometric color measurements of 100 natural teeth", J Prosthet Dent, 53, pp.105~109 (1985)
- Jorgenson MW, "Spectrophotometric study of five porcelain shades relative to the dimensions of color, porcelain thickness, and repeated firings", J Prosthet Dent, 42, pp.96~105 (1979)
- Seghi RR, "Spectrophotometric analysis of color differences between porcelain systems", J Prosthet Dent, 56, pp.35~40 (1986)
- Esquivel JF, "Color stability of lowfusing porcelains for titanium", Int J Prosthodont, 8, pp.479~485 (1995)
- Seghi RR, "Visual and instrumental colorimetric assessments of small color differences on translucent dental porcelain", J Dent Res, 68, pp.1760~1764 (1989)
- Gross MD, "A colorimetric study of coffee and tea staining of four composite resins", J Oral Rehabil, 4, pp.311~322 (1977)
- Barrett AA, "Influence of tab and disk design on shade matching of dental porcelain", J Prosthet Dent, 88, pp.591~597 (2002)
- Dozic、A, "The influence of porcelain layer thickness on the final shade of ceramic restorations", J Prosthet Dent, 90, pp.563~570 (2003)
- Chu SJ, "Color, in: The Science and Art of Porcelain Laminate Veneers", pp.158~206 (2003), Quintessence
- Preston JD, "Current status of shade selection and color matching", Quin-tessence Int, 16, pp.47~58 (1985)
- Wang X, "Comparison of the color of ceramics as measured by different spectrophotometers and colorimeters", Int J Prosthodont, 18, pp.73~74 (2005)
- Kourtis SG, "Spectrophotometric evaluation of the optical influence of different metal alloys and porcelains in the metal-ceramic complex", J Prosthet Dent, 92, pp.477~485 (2004)
- Cho MS, "Changes in optical properties of enamel porcelain after repeated external staining", J Prosthet Dent, 95, pp.437~443 (2006)
- Park JH, "Influence of illuminants on the color distribution of shade guides", J Prosthet Dent, 96, pp.402~411 (2006)
- Douglas RD, "Variability of porcelain color reproduction by commercial laboratories", J Prosthet Dent, 90, pp.339~346 (2003)
- Ishikawa-Nagai S, "Using a computer color-matching system in color reproduction of porcelain restorations. Part 2: Color reproduction of stratiform-layered porcelain samples", Int J Prosthodont, 6, pp.522~527 (1993)
- Paul SJ, "Conventional visual vs spectrophotometric shade taking for porcelainfused- to-metal crowns: a clinical comparison", Int J Periodontics Restorative Dent, 24, pp.222~231 (2004)