유색 및 백색 지르코니아 세라믹 코핑의 코핑 디자인에 따른 파절 하중과 변연 적합성
Fracture load and marginal fitness of zirconia ceramic coping by design and coloration
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
연구목적: 본 연구는 유색 및 백색 지르코니아 세라믹으로 제작된 코핑의 디자인에 따른 지르코니아 세라믹 코핑의 파절 하중과 변연 적합성을 평가한 것으로 그 결과를 임상에 응용하는데 도움을 주고자 하였다. 연구재료 및 방법: CAD/CAM system (Everset, KAVO Dental GmbH, Biberach, Germany)을 이용하여, 80개의 상악 제1 소구치 세라믹 코핑을 제작하되, 1그룹은 전체적으로 균일하게 0.3 mm로, 2그룹은 협면 0.3 mm 설면 0.6 mm, 3그룹은 전체 0.6 mm 균일하게, 4그룹은 협면 0.6 mm 설면 1.0 mm로 디자인하고, 유색 (I) 및 백색 (II) 지르코니아 코핑을 각 그룹당 10개가 되게 하였다. 소성직후와 조정 후 코핑의 변연 적합성을 Video Microscope System (sv-35, Sometech, Seoul, Korea)를 이용하여 100배율로 관찰하였고, 금속 주 모형에 코핑을 강화형 글래스아이오노머 시멘트로 합착 후 Universal Testing Machine (Instron 4467, Norwood, MA, USA)을 이용하여 파절 하중을 측정하여, one-way ANOVA test 를 시행하여 결과를 분석하였다. 결과: 1. CAD/CAM 지르코니아 코핑의 파절 하중은 1그룹, 2와 3그룹, 그리고 4그룹간에 유의성있는 차이를 보였으며 I4, II4의 파절 하중값이 가장 컸다. 2. 코핑의 디자인이 같고 색이 다른 그룹간의 비교에서는 전 그룹 모두 파절 하중값의 유의성은 없었다. 3. 소성 직후 변연 오차 측정값은 I2그룹을 제외한 전그룹에서 협측 측정점에서 변연오차가 가장 큰 경향을 보였다. 4. 소성 직후 변연 오차 측정값은 I 그룹 지르코니아 그룹에서 그룹별 전체적인 변연적합도를 보았을 때 그룹간에 유의한 차이는 없었다 (P > .05). 5. 소성직후 변연 오차 측정값은 백색 지르코니아 그룹에서 그룹별 전체적인 변연 적합도를 보았을때 II1그룹의 변연 오차가 가장 컸다 (P < .05). 6. 소성직후 변연오차 측정값은 디자인이 같은 그룹의 유색, 백색 비교에서, I1와 II1그룹을 제외한 나머지 그룹에서 백색 지르코니아의 변연 적합도가 더 좋았다 (P < .05). 7. 내면 조정 후에는 색상화 및 지르코니아 코어 디자인에 따른 전 그룹간 변연 적합도의 차이는 없었다 (P > .05). 결론: 지르코니아 코핑 디자인과 색상화에 따른 변연 적합성은 소성 직후에는 다소 차이가 있었으나 내면 조정을 하면 임상 사용에는 무리가 없을 것으로 판단되었고, 파절강도 강화를 위해 코핑의 두께는 가급적 두꺼워야 하나, 가시면 (순면, 협면)의 심미성(반투명성)을 고려할 경우 가시면을 0.3 mm로 얇게 해도 파절 강도에 큰 영향을 주지 않는 것으로 사료되었다.
Abstract
Purpose: The purpose of this study was to compare the marginal fitness and fracture load of the zirconia copings according to the design with different thickness and coloration. Material and methods: The evaluation was based on 80 zirconia copings. Zirconia copings were fabricated in design with different thicknesses using CAD/CAM system (Everset, KAVO dental GmbH, Biberach, Germany). The designs of copings were divided into four groups. The first group consisted of copings with uniform thickness of 0.3 mm. The thickness in the second group was 0.3 mm on the buccal surface and 0.6 mm on the lingual surface. The third group consisted of coping with uniform thickness of 0.6 mm. The thickness in the fourth group was 0.6 mm on the buccal surface and 1mm on the lingual surface. Each group consisted of 10 colored and 10 uncolored copings. Half of the copings (40) processed with a milling system according to the specific design were sent to be given a color (A3) through saturation in special dye by a manufacturing company. Just after sintering, the marginal discrepancies of copings were measured on the buccal, lingual, mesial and distal surfaces of metal die, under a Video Microscope System (sv-35, Sometech, Seoul, Korea) at a magnification of × 100. It was remeasured after the adjusting of the inner surface. Next, all copings were luted to the metal dies using reinforced cement {GC FujiCEM (GC Corp. Tokyo, Japan)} and mounted on the testing jig in a Universal Testing Machine (Instron 4467, Norwood, MA, USA). The results were analyzed statistically using the one-way ANOVA test. Results: The obtained results were as follow: 1. The measured value of marginal discrepancy right after sintering was the greatest in the contraction of the buccal area in all groups, except for group I2. 2. There was no significant difference of marginal fitness among the groups in the colored zirconia group (P < .05). 3. When the marginal fitness among the groups in the uncolored zirconia group was considered, group II2 had the smallest marginal discrepancy. 4. When the colored and uncolored groups with the same design were compared, there was a significant difference between I1 and II1 groups. In group 2, 3, and 4, the uncolored zirconia had the greatest marginal fitness (P < .05). 5. After adjustment of inner surface, there was no significant difference in the marginal fitness in all groups when color and design of the zirconia coping were compared. 6. The fracture load of CAD/CAM zirconia copings showed significant difference in group 1, 2, 3, and 4. I4 and II4 had the strongest fracture load. 7. When groups with different color and same design were compared, all colored groups showed greater fracture load (P > .05), with no significance. Conclusion: There was difference in the marginal fitness according to the design and coloration of zirconia copings right after sintering, but it was decided that the copings may well be used clinicallyif the inner surface are adjusted. The copings should be thick enough for the reinforcement of fracture strength. But considering the esthetics of the visible surfaces (labial and buccal surface), the thickness of copings may be a little thin, without giving any significant effect on the fracture strength. This type of design may be considered when giving priority to preservation of tooth or esthetics.
참고문헌 (36)
- 신언식, "3종의CAD", CAM 시스템에서 지르코니아 코어의 파절 강도에 관한 비교 연구, 2008, pp.46(1), 22~30[DOI]
- 정희찬, "지르코니아 단일구조 전부도재관의 파절강도", 대한치과보철학회지, 44(2), pp.157~164 (2006), 대한치과보철학회
- Giordano R, "All-ceramic restorative systems: aluminabased core systems", J Mass Dent Soc, 51, pp.30~35 (2002)
- White SN, "Modulus of rupture of the Procera All-Ceramic System", J Esthet Dent, 8, pp.120~126 (1996)
- Wagner WC, "Biaxial flexural strength and indentation fracture toughness of three new dental core ceramics", J Prosthet Dent, 76, pp.140~144 (1996)
- Kelly JR, "Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling", J Dent Res, 74, pp.1253~1258 (1995)
- Fischer H, "Lifetime prediction of all-ceramic bridges by computational methods", J Dent Res, 82, pp.238~242 (2003)
- Kupiec KA, "Wilwerding TM. Evaluation of porcelain surface treatments and agents for composite-to-porcelain repair", J Prosthet Dent, 76, pp.119~124 (1996)
- May KB, "Precision of fit: the Procera AllCeram crown", J Prosthet Dent, 80, pp.394~404 (1998)
- 김동근, "CAD", CAM을 이용하여 제작한 All-ceramic core의 변연 적합도, 2003, pp.41(1), 20~34[DOI]
- Tinschert J, "Marginal fit of alumina-and zirconia-based fixed partial dentures produced by a CAD", CAM system, 2001, pp.26, 367~374
- Valderrama S, "A comparison of the marginal and internal adaptation of titanium and gold-platinum-palladium metal ceramic crowns", Int J Prosthodont, 8, pp.29~37 (1995)
- Kelly JR, "Ceramics in dentistry: historical roots and current perspectives", J Prosthet Dent, 75, pp.18~32 (1996)
- Heffernan MJ, "Relative translucency of six all-ceramic systems. Part I: core materials", J Prosthet Dent, 88, pp.4~9 (2002)
- Heffernan MJ, "Relative translucency of six all-ceramic systems. Part II: core and veneer materials", J Prosthet Dent, 88, pp.10~15 (2002)
- Antonson SA, "Contrast ratio of veneering and core ceramics as a function of thickness", Int J Prosthodont, 14, pp.316~320 (2001)
- Johnston WM, "Translucency parameter of colorants for maxillofacial prostheses", Int J Prosthodont, 8, pp.79~86 (1995)
- Zhang Y, "Influence of powder", liquid mixing ratio on porosity and translucency of dental porcelains, 2004, pp.91, 128~135
- Devigus A, "substructures: influence on value and chroma, part I", Int J Comput Dent, 7, pp.293~301 (2004)
- Devigus A, "substructures: influence on value and chroma, part II", Int J Comput Dent, 7, pp.379~388 (2004)
- Koutayas SO, "Colorimetric evaluation of the influence of five different restorative materials on the color of veneered densely sintered alumina", J Esthet Restor Dent, 15, pp.353~360 (2003)
- Flexural strength and coloured and aged zirconia, "Beuer F", IADR, ~, pp.abstract no 0113 (2004)
- 박광수, "전부도재수복물을 위한 수종의 코어 세라믹의 반투명도 및 색 안정성", 구강회복응용과학지, 23(2), pp.145~157 (2007), 대한턱관절교합학회
- Koo JY, "Marginal fidelity according to the margin types of all ceramic crowns", J Korean Acad Prosthodont, 35, pp.445~457 (1997)
- Sorensen JA, "A standardized method for determination of crown margin fidelity", J Prosthet Dent, 64, pp.18~24 (1990)
- Kay GW, "Factors affecting the seating and fit of complete crowns: a computer simulation study", J Prosthet Dent, 55, pp.13~18 (1986)
- 김인섭, "CAD", CAM으로 제작한 코누스내관의 변연적합, 2002, pp.40(1), 30~41[DOI]
- Boening KW, "Clinical fit of Procera AllCeram crowns", J Prosthet Dent, 84, pp.419~424 (2000)
- Wang CJ, "Effects of cement, cement space, marginal design, seating aid materials, and seating force on crown cementation", J Prosthet Dent, 67, pp.786~790 (1992)
- 이일권, "전부도재수복물을 위한 유색 및 무색 지르코니아 세라믹의 굴곡강도", 구강회복응용과학지, 23(2), pp.106~119 (2007), 대한턱관절교합학회
- Flexural strength and coloured and aged zirconia, "Beuer F", IADR, ~, pp.abstract no 1775. (2004)
- Huang H, "Effect of three kinds of rare earth oxides on chromaticity and mechanical proper ties of zirconia ceramic", Zhonghua Kou Qiang Yi Xue Za Zhi, 41, pp.327~330 (2006)
- Hwang JW, "A study on the fracture strength of conventional and copy-milled In-ceram crown", J Korean Acad Prosthodont, 35, pp.417~429 (1997)
- Seghi RR, "Relative flexural strength of dental restorative ceramics", Dent Mater, 6, pp.181~184 (1990)
- Lee SK, "Fracture strength of all-ceramic crowns with varying core elastic moduli", Aust Dent J, 45, pp.103~107 (2000)
- 서준용, "CAD", CAM을 이용한 구치부 전부도재 고정성 국소의치 지르코니아 코어의 연결부 설계에 따른 파절강도, 2006, pp.44(1), 29~39[DOI]