완전 디지털 시스템을 이용한 상악동 거상술 및 구치부 임플란트 고정성 보철 수복 증례
Sinus floor elevation and implant-supported fixed dental prosthesis in the posterior area, with fulldigital system: a case report
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
진단, 수술, 인상, 보철물 제작 등 임플란트 치료 전 과정에서 디지털 기술이 활용되고 있다. 본 증례에서는 디지털 수술 가이드를 이용하여 합병증 없이 상악동 거상술을 시행하고, 계획된 위치에 임플란트를 식립하였다. 골유착을 위한 치유 기간 이후, CAD-CAM (Computer-aided design/Computer-aided Manufacturing)으로 맞춤형 지대주 및 임시 보철물을 제작하여 장착하고, 환자의 적응도와 교합을 평가하였다. 임시 보철물상에서 교합 변화가 관찰되어, 광중합형 컴포지트 레진으로 수리하였다. 최종 보철물 제작 시, 지대주의 수직 침하, 임시 보철물의 형태와 적응된 교합 관계를 반영하기 위해, 이중 스캔과 지대주 수준의 디지털 인상을 채득하였다. 치은 압배 없이 치은 연하 변연을 인기하기 위해, CAD-CAM 소프트웨어상에서 라이브러리화된 지대주 데이터를 중첩하고, 지르코니아 최종 보철물 제작하여 장착하였다. 구치부 임플란트 수복 시, 디지털 시스템을 이용하여 전통적인 방법에서 겪는 어려움을 줄이고, 수술부터 보철물 제작까지 효율적인 치료 과정과 안정적이고 예지성 있는 결과를 얻어 보고하는 바이다.
Abstract
A variety of digital technologies are being used throughout the entire implant treatment process of diagnosis, surgery, impression, design, and fabrication of prostheses. In this case, using a digital surgical guide, sinus floor elevation was performed without complications, and the implants were placed in the planned position. After the healing period for osseointegration, CAD-CAM (Computer-aided design-Computer-aided manufacturing) customized abutments and provisional prostheses were delivered. While using the provisional prosthesis, occlusal change was observed. To transfer the intermaxillary relationship and abutment position that reflect occlusal change and axial displacement, double scanning and abutment-level digital impressions were taken. Abutment superimposition was used to capture the subgingival margin without gingival retraction. Then, the definitive prosthesis was designed and fabricated with digital system. We report a case applying digital system, to achieve the predictable result as well as the efficient treatment process from implant surgery to fabricating prosthesis in the posterior area.
참고문헌 (18)
- Brånemark PI, "Osseointegrated implants in the treatment of the edentulous jaw. Experience from a 10-year period", Scand J Plast Reconstr Surg Suppl, 16, pp.1~132 (1977)
- Elani HW, "Trends in dental implant use in the U.S., 1999-2016, and projections to 2026", J Dent Res, 97, pp.1424~1430 (2018)
- Jemt T, "Fixed implant-supported prostheses in the edentulous maxilla. A five-year follow-up report", Clin Oral Implants Res, 5, pp.142~147 (1994)
- Tahmaseb A, "The accuracy of static computer-aided implant surgery : A systematic review and meta-analysis", Clin Oral Implants Res, 29, pp.416~435 (2018)
- Araujo-Corchado E, "Computer-guided surgery for dental implant placement : a systematic review", Prosthesis, 4, pp.540~553 (2022)
- Lemos CAA, "Comparison of external and internal implant-abutment connections for implant supported prostheses. A systematic review and meta-analysis", J Dent, 70, pp.14~22 (2018)
- Kim KS, "Variation in the total lengths of abutment", implant assemblies generated with a function of applied tightening torque in external and internal implant-abutment connection, 2011, pp.22, 834~839
- Kim SJ, "Digital evaluation of axial displacement by implant-abutment connection type : An in vitro study", J Adv Prosthodont, 10, pp.388~394 (2018)
- Lee JH, "Axial displacements in external and internal implant-abutment connection", Clin Oral Implants Res, 25, pp.e83~9 (2014)
- Hyeon JM, "A quantitive analysis of settling effect in internal tapered connection implants after cyclic loading using 858 Bionix II", J Korean Acad Oral Maxillofac Implantol, 19, pp.2~9 (2015)
- Ko KH, "Axial displacement in cement-retained prostheses with different implant-abutment connections", Int J Oral Maxillofac Implants, 34, pp.1098~1104 (2019)
- Jeong SH, "Axial displacement in single-tooth implant restoration : case report", J Korean Acad Prosthodont, 59, pp.126~133 (2021)
- Yang DH, "Full mouth implant rehabilitation with double scanning of provisional restoration", J Korean Acad Prosthodont, 52, pp.252~257 (2014)
- Ramfjord SP, "Occlusion" (1995), WB Saunders
- Bennani V, "Gingival retraction techniques for implants versus teeth : current status", J Am Dent Assoc, 139, pp.1354~1363 (2008)
- Azer SS, "A simplified technique for creating a customized gingival emergence profile for implant-supported crowns", J Prosthodont, 19, pp.497~501 (2010)
- Tsirogiannis P, "Evaluation of the marginal fit of single-unit, complete-coverage ceramic restorations fabricated after digital and conventional impressions : A systematic review and meta-analysis", J Prosthet Dent, 116, pp.328~335 (2016)
- Park TM, "Accuracy of customized abutment data superimposition according to the extent of scanning area", Int J Prosthodont, 34, pp.390~394 (2021)