A Study on the 3D Scanning of Fashionable Textile Materials － Ripple-finished Cotton Fabric and Shrink-proof Finished/Felted Wool Fabric －
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Three-dimensional(3D) virtual clothing simulation system may require the use of physical, mechanical, and configurational data in order to mimic the actual clothing with high degree of realism. Therefore the 3-dimensional scanning system based on optical methods was adopted to extract the 3-dimensional data of the fabric surface. In this study, the appearances of the 3-dimensionally transformed textile fabrics via several finishing procedures were investigated using a 3D scanning system. The wool gauze fabrics treated with the shrink-proof finishing and the felting process showed height changes up to 4.5mm. The 3-dimensional configuration may be objectively described by the use of mesh generation from the scanned output. The generated mesh information may further be utilized in the 3D virtual clothing simulation system for accurate description of the fashionable textile materials used in the simulation system.
Abstract
Three-dimensional(3D) virtual clothing simulation system may require the use of physical, mechanical, and configurational data in order to mimic the actual clothing with high degree of realism. Therefore the 3-dimensional scanning system based on optical methods was adopted to extract the 3-dimensional data of the fabric surface. In this study, the appearances of the 3-dimensionally transformed textile fabrics via several finishing procedures were investigated using a 3D scanning system. The wool gauze fabrics treated with the shrink-proof finishing and the felting process showed height changes up to 4.5mm. The 3-dimensional configuration may be objectively described by the use of mesh generation from the scanned output. The generated mesh information may further be utilized in the 3D virtual clothing simulation system for accurate description of the fashionable textile materials used in the simulation system.
참고문헌 (21)
- "DCSuite"[URL]
- "CLO 3D"[URL]
- "OptiTex"[URL]
- K.J. Choi, "Stable but responsive cloth", ACM Transactions on Graphics (Proceedings SIGGRAPH 2002), 21(3), pp.81~97 (2002)
- F. Ji, "Three-dimensional garment simulations based on a mass-spring system", Textile Res. J., 76(1), pp.12~17 (2006)
- M. Oshita, "Real-time cloth simulation with sparse particles and curved faces", Proc.of Computer Animation 2001 14th Conference, pp.220~227 (2001)
- 신장희, "테일러드 칼라의 생산업체용 패턴과 교육용 패턴의 비교연구", 패션 비즈니스, 13(5), pp.37~44 (2009), 한국패션비즈니스학회
- 장희경, "중국 성인여성의 치수규격선정을 위한 체간부 체형분류", 패션 비즈니스, 15(1), pp.103~114 (2011), 한국패션비즈니스학회
- Lee Minjeong, "A Study on Representation of 3D Virtual Fabric Simulation with Drape Image Analysis I", Paper presented at 2011 Korea-Russia International Conference (2011)
- Kim Anna, "A Study on representation of the virtual clothing materials using a digital clothing program", 석사, pp.2009
- 김경선, "키토산과 1,2,3,4-Butanetetracarboxylic Acid, Citric Acid로 가공된 면직물의 역학적 특성과 가상 봉제 이미지", 패션 비즈니스, 13(1), pp.102~114 (2009), 한국패션비즈니스학회
- 이정민, "에콜로지 트렌드 소재의 외관 특성에 관한 연구", 패션 비즈니스, 12(4), pp.131~142 (2008), 한국패션비즈니스학회
- 최정임, "머서화 가공 면직물의 KES에 의한 물리적 특성과 태의 변화에 대한 연구", 패션 비즈니스, 11(1), pp.125~135 (2007), 한국패션비즈니스학회
- "3D Scanners Guide to the Technology"[URL]
- P. S. Huang, "Fast three-step phase shifting algorithm", Applied Optics, 45(29), pp.5086~5091 (2006)
- H. Abdul-Rahman, "Fast three- dimensional phase-unwrapping algorithm based on sorting by reliability following a non-continuous path", Optical Measurement Systems for Industrial Inspection IV, Proc. of SPIE, 5856, pp.32~40 (2006)
- E.R.Trotman, "Dyeing and Chemical Technology of Textile Fibres", pp.62~64 (1970), Charles Griffin & Co
- Ahn,Youngmoo, "Lab Manual for Fashion Materials", pp.64~69 (2011), Kyungchoon Pub. Co.
- C. Rocchini, "A low cost 3D scanner based on structured light", Eurographics 2001, 20(3), pp.1~10 (2001)
- Kim, Jongjun, "High-sensitivity Textile Expression Techniques", pp.90~96 (2007), Ewha Womans University Press
- "Rhino3D"[URL]