정립시 및 동작시 팔의 체표면 전개도와 소매원형의 관계
The Relationship of the Body Surface Development Figure with the Sleeve Basic Pattern in the Standing and Arm-Movement Positions
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The suitability of the pattern manufactured with the development figure was considered by reviewing the development conditions that can be directly connected to the basic pattern in the human body surface development figure with the cast bandage method. The method to prepare the sleeve basic pattern was based on the cylindrical surface development method, and the sleeve basic pattern covering the 45 and 90 degrees momentum of the arm-movement was made by using the cast-type body surface development figure prepared with the horizontal line of the sleeve hem placed horizontally in the plan and by combining the cast-type body surface development figure in the standing position with the figure in the moving position. The test clothing was prepared with the sleeve pattern adding the bodice pattern in the standing position and the momentum and was worn on the FRP replica. The relationship theory of the body surface development figure with the pattern was derived by reviewing the suitability from the wearing state. The sleeve-cap height of the sleeve basic pattern resulted in about 80% in the standing position when the needs for a physical activity are 45 degrees and the about 50% when the needs for a physical activity are 90 degrees. The additional size of the diagonal length of the sleeve-cap could be set as "0" if the sleeve-cap height is low by 50% and as 50% of the additional size in the standing position if the sleeve-cap height is 80%.
Abstract
The suitability of the pattern manufactured with the development figure was considered by reviewing the development conditions that can be directly connected to the basic pattern in the human body surface development figure with the cast bandage method. The method to prepare the sleeve basic pattern was based on the cylindrical surface development method, and the sleeve basic pattern covering the 45 and 90 degrees momentum of the arm-movement was made by using the cast-type body surface development figure prepared with the horizontal line of the sleeve hem placed horizontally in the plan and by combining the cast-type body surface development figure in the standing position with the figure in the moving position. The test clothing was prepared with the sleeve pattern adding the bodice pattern in the standing position and the momentum and was worn on the FRP replica. The relationship theory of the body surface development figure with the pattern was derived by reviewing the suitability from the wearing state. The sleeve-cap height of the sleeve basic pattern resulted in about 80% in the standing position when the needs for a physical activity are 45 degrees and the about 50% when the needs for a physical activity are 90 degrees. The additional size of the diagonal length of the sleeve-cap could be set as "0" if the sleeve-cap height is low by 50% and as 50% of the additional size in the standing position if the sleeve-cap height is 80%.
참고문헌 (21)
- Kim Gumhwa, "A Measurement of Horizontal Section Figures of a Human Body a Three-dimensional Human Body Measurement System -Examination of Twist Correction and Averaging Section Figures-", Journal of the Japan Research Association for textile end-uses, 40(8), pp.539~547 (1999)
- Miyoshi Machiko, "Study on the Method of Measuring a Vacant Space Distance in a Worn Jacket for Clothing Pattern Design ―Using the Three-dimensional Measuring System―", Journal of the Japan Research Association for textile end-uses, 42(4), pp.233~242 (2001)
- 박순지, "밀착의형 3차원 파라메트릭 모델을 활용한 상반신 원형의 다트 및 절개분리선 설정에 관한 연구", 한국의류산업학회지, 12(4), pp.467~476 (2010), 한국의류산업학회
- 서추연, "노년 여성의 3-D 입체형상 데이터를 활용한 상반신 원형 설계방법 연구", 한국의류학회지, 32(5), pp.846~858 (2008), 한국의류학회
- 서추연, "체표면분할법에 의한 성인 남성용 피티드 토르소형 원형 설계", 한국의류학회지, 33(7), pp.1109~1120 (2009), 한국의류학회
- 윤미경, "3차원 인체 형상을 이용한 20대 여성의 하반신 전개패턴에 관한 연구", 한국의류학회지, 31(5), pp.692~704 (2007), 한국의류학회
- Park Soonjee, "Development of Theory and Auto CAD Program for Designing the Individual Bodice Pattern from 3D Scanning Data of Human Body", Journal of ARAHE, 10(4), pp.216~225 (2003)
- Yamada Tamiko, "A Theoretical Study of the Sleeve-Crown Change in Movement", Bulletin of Tokyo Kasei University, 29, pp.217~225 (1989)
- Fujii Kazue, "About a research work-3 -sleeve upper arm about the pattern of clothes seen more than the figure", Bulletin of Simane Women's Junior College, 20, pp.22~31 (1982)
- Hahm Okcsang, "An Ergonomic Study of the Sleeve Pattern According to Arm Movement -on Expansion and Contraction of the Skin Surface of the Arm-", Journal of the Korean Home Economics Association, 19(3), pp.21~32 (1981)
- Koike Mieko, "Gypsum Method to Decide the Standard Ease of Basic Sleeve Pattern", Journal of Home Economics of Japan, 30(2), pp.71~77 (1979)
- Miyoshi Machiko, "Think about the ease amount around the armhole（1）", Clothing habit workshop, 3(3・4), pp.52~57 (1976)
- Miyoshi Machiko, "Think about the ease amount around the armhole（2）", Clothing habit workshop, 3(5), pp.22~25 (1976)
- Miyoshi Machiko, "Think about the ease amount around the armhole（3）", Clothing habit workshop, 3(6), pp.23~25 (1976)
- Miyoshi Machiko, "The Factors of Pattern-MakingⅢ", Clothing habit workshop, 23(4), pp.38~45 (1980)
- Miyoshi Machiko, "The Factors of Pattern-MakingⅣ", Clothing habit workshop, 24(2), pp.17~23 (1981)
- Miyoshi Machiko, "A Study on Pattern-Making System of Sleeve in View of Somato Scopia of Shoulder and Upper Arm", Bulletin of Bunka Women's University, 8, pp.73~96 (1977)
- Machiko Miyoshi, "Modeling science of clothes The theory volume 1", pp.112~ (2001), Bunka school textbook Press
- Cho Kyunghee, "A Study on Bodice and Sleeve Basic Pattern adapted to upper limb movement", 석사, pp.1997
- Cho Kyunghee, "Relationship between the Sleeve Patterns for Female Adults and Characteristics of arms and Upper Trunks -Creation of data related to the part of sleeve cap well-fitting to arm characteristics-", Journal of the Japan Research Association for textile end-uses, 46(10), pp.647~662 (2005)
- Miyoshi Machiko, "The Relationship between the Body Surface Development Figure of Arm-Movement Positions and the Sleeve Basic Pattern", 1997 seminar presentation paper collection of the Japan Research Association for textile end-uses, pp.12~13 (1997)