실버 의류산업 활성화를 위한 노년 비만여성의 토르소 원형 연구 - CLO 3D 가상착의 시스템 활용 -
Study on torso patterns for elderly obese women for vitalization of the silver clothing industry - Applying the CLO 3D program -
1
조회
0
다운로드
9
인용
0
참고문헌
키워드
초록
The purpose of this study was to suggest torso patterns that fit the three main body shapes of elderly obese women. To reduce time, costs, and also the trial and error needed to make patterns, the CLO program for 3D test wear was employed. Three virtual models for aged obese women were use, with the YUKA system used to produce torso patterns. 3D simulation of test wear and corrections was done to design optimal torso patterns. The results were as follows: First, for the three models of obese women’s body shapes as realized by CLO 3D, Type 1 is lower-body obesity shapes, Type 2 is abdominal obesity shapes, and Type 3 is whole-body obesity shapes. Second, to design the study patterns, actual measurement values, back waist length and waist to hip length, were used. The armhole depth (B/4-1.5), front interscye (B/6+2.3), front neck width (B/12-0.5), front neck depth (B/12+0.5), front waist measurement (W/4+ 1.5+D), front hip measurement (H/4+2+0.5), and back hip measurement (H/4+3-0.5) were calculated using formulas. Third, according to the results of test-wearing the study patterns, reduced front neck width and depth improved the neck fit and reduced armhole depth bettered loose or plunging armhole girth and also reduced the sagging of bust c.. Also, tight sidesfrom aprotruded waist and abdomen improved with the increase of surpluses in the back waist and also back and front hip c. The exterior was enhanced by displacement of back and front darts, which distributed surpluses better.
Abstract
The purpose of this study was to suggest torso patterns that fit the three main body shapes of elderly obese women. To reduce time, costs, and also the trial and error needed to make patterns, the CLO program for 3D test wear was employed. Three virtual models for aged obese women were use, with the YUKA system used to produce torso patterns. 3D simulation of test wear and corrections was done to design optimal torso patterns. The results were as follows: First, for the three models of obese women’s body shapes as realized by CLO 3D, Type 1 is lower-body obesity shapes, Type 2 is abdominal obesity shapes, and Type 3 is whole-body obesity shapes. Second, to design the study patterns, actual measurement values, back waist length and waist to hip length, were used. The armhole depth (B/4-1.5), front interscye (B/6+2.3), front neck width (B/12-0.5), front neck depth (B/12+0.5), front waist measurement (W/4+ 1.5+D), front hip measurement (H/4+2+0.5), and back hip measurement (H/4+3-0.5) were calculated using formulas. Third, according to the results of test-wearing the study patterns, reduced front neck width and depth improved the neck fit and reduced armhole depth bettered loose or plunging armhole girth and also reduced the sagging of bust c.. Also, tight sidesfrom aprotruded waist and abdomen improved with the increase of surpluses in the back waist and also back and front hip c. The exterior was enhanced by displacement of back and front darts, which distributed surpluses better.
참고문헌 (20)
- 최진, "성인여성의 하반신 체형분석 및 부츠 컷 청바지의 가상 외관평가", Family and Environment Research, 46(2), pp.73~83 (2008), 대한가정학회
- 도월희, "3차원 가상 착장 시스템을 이용한 체형별 니트 재킷의 맞음새 연구-30~40대 성인 여성을 중심으로-", 한국의류학회지, 34(10), pp.1632~1646 (2010), 한국의류학회
- 홍은희, "3차원 인체형상의 평면전개에 의한 성인남성의 체형유형별 타이트 핏 토르소원형 설계 : 가상착의 시스템을 활용하여", 박사, 의류학과, pp.2013
- 홍은희, "남성 싱글플리티드 팬츠 패턴비교분석 및 가상착의평가", 한국의상디자인학회지, 17(1), pp.105~115 (2015), 한국의상디자인학회
- Kim, H. -S., "A study on body shapes using 3D measurement and torso pattern of obese women", doctor, pp.2007
- 김경아, "남성 슬림 팬츠 패턴 비교 분석 - 3D CLO 가상착의 시스템을 활용하여 -", 복식문화연구, 22(4), pp.605~618 (2014), 복식문화학회[DOI]
- 김민정, "남성의 클래식핏과 슬림핏 셔츠 패턴 비교 분석에 관한 연구 - 3D 가상착의를 활용하여 -", 복식문화연구, 22(2), pp.209~224 (2014), 복식문화학회[DOI]
- Kim, S. J., "Digital fashion design" (2015), Gyomoonsa
- 김영숙, "토르소 원형의 실제착의와 3D 가상착의의 외관 유사도 평가에 관한 연구", 복식문화연구, 22(6), pp.911~929 (2014), 복식문화학회[DOI]
- "Korean Agency for Technology and Standards", Ministry of Knowledge Economy, ~ (2004)
- 이민정, "국내·외 패션교육에 있어서 3D 어패럴 CAD 시스템 활용 사례연구", 한국의류학회지, 35(9), pp.1112~1124 (2011), 한국의류학회
- 이민정, "CLO 3D 아바타 사이징과 실제인체간의 치수 및 형태 차이 비교 분석", 패션 비즈니스, 16(4), pp.137~151 (2012), 한국패션비즈니스학회
- Lee, H. S., (2013), Kyohakyungusa
- 이정진, "60～79세 노년 여성의 슬랙스 구입 현황 및 착용 만족도에 관한 연구", 복식문화연구, 18(3), pp.541~549 (2010), 복식문화학회
- 이은영, "신체밀착형 원피스 프로토타입 패턴개발 : 20대 C컵여성을 중심으로", 석사, 의상학과 의상학전공, pp.2013
- 임지영, "3D 가상착의 시스템에 의한 비만 중년여성의 토르소 원형설계에 관한 연구", 한국의류산업학회지, 12(1), pp.86~93 (2010), 한국의류산업학회
- 임지영, "20~30대 저체중 성인여성의 토르소원형 설계 - Clo 3D 프로그램 적용 사례 -", 한국의류산업학회지, 15(6), pp.963~970 (2013), 한국의류산업학회
- Ryu, H. S., (2001), Suhaksa
- 성옥진, "실버 의류산업 활성화를 위한 노년 비만여성의 체형연구", 복식문화연구, 23(5), pp.755~767 (2015), 복식문화학회[DOI]
- 윤지원, "3차원 인체형상데이터를 이용한 성인여성의 체형유형별 타이트 핏 토르소원형 개발 : 가상착의 시스템을 이용하여", 박사, 의류학과, pp.2013