노년 비만남성의 셔츠원형 개발을 통한 실버 의류산업 활성화 기반 구축 - CLO 3D 가상착의 시스템 활용 -
Building up the foundation for the elderly apparel industry through the development on shirt sloper of elderly obese males - Applying CLO 3D program -
0
조회
0
다운로드
9
인용
0
참고문헌
키워드
초록
The purpose of this study is to create a shirt sloper suitable for an elderly male body shape by producing virtual models using a 3D-virtualization program, making a torso prototype using the Yuka CAD system, and employing 3D simulation to virtualize and calibrate the model. First, the following three types of obese dummies are implemented through the CLO 3D program: Type 1 exhibits body fat in the lower body; Type 2 exhibits an obese abdomen; and Type 3 displays a balanced form of obesity. Second, for the design of the shirt pattern, the waist back length (measured value+1), back armhole depth (C/10+12+3+0.5~1.5), front armhole depth (back armhole depth 0~1), front interscye (2C/10‒1+0.5‒0.5), armscye depth (C/10+2+3.5+ 0.5), back interscye (2C/10‒1+1), front chest C (C/4+2.5+1), back chest C (C/4+2.5‒1), front hem C (C/4+2.5+1(+2)), back hem C (C/4+2.5‒1(+2)), cap height (AH/3‒5), and biceps width (Front AH‒1, Back AH‒1) are calculated. Third, the virtual attachment of the shirt pattern is resolved by increasing the front and back armhole depths, and the front and rear wrinkles are improved by adding a back armhole dart. The front hem lift and lateral pull caused by the protrusion of the abdomen are amended by increasing the margin of the chest, waist C, and hip C, with the appearance improved by balanced margin distribution in the front, back, and side panels. The improved retail pattern with an increase in the front armholes C was balanced on the torso plate.
Abstract
The purpose of this study is to create a shirt sloper suitable for an elderly male body shape by producing virtual models using a 3D-virtualization program, making a torso prototype using the Yuka CAD system, and employing 3D simulation to virtualize and calibrate the model. First, the following three types of obese dummies are implemented through the CLO 3D program: Type 1 exhibits body fat in the lower body; Type 2 exhibits an obese abdomen; and Type 3 displays a balanced form of obesity. Second, for the design of the shirt pattern, the waist back length (measured value+1), back armhole depth (C/10+12+3+0.5~1.5), front armhole depth (back armhole depth 0~1), front interscye (2C/10‒1+0.5‒0.5), armscye depth (C/10+2+3.5+ 0.5), back interscye (2C/10‒1+1), front chest C (C/4+2.5+1), back chest C (C/4+2.5‒1), front hem C (C/4+2.5+1(+2)), back hem C (C/4+2.5‒1(+2)), cap height (AH/3‒5), and biceps width (Front AH‒1, Back AH‒1) are calculated. Third, the virtual attachment of the shirt pattern is resolved by increasing the front and back armhole depths, and the front and rear wrinkles are improved by adding a back armhole dart. The front hem lift and lateral pull caused by the protrusion of the abdomen are amended by increasing the margin of the chest, waist C, and hip C, with the appearance improved by balanced margin distribution in the front, back, and side panels. The improved retail pattern with an increase in the front armholes C was balanced on the torso plate.
참고문헌 (16)
- 차수정, "고령 남성의 하반신 체형 유형화", 한국디자인문화학회지, 25(2), pp.569~579 (2019), 한국디자인문화학회
- 최수경, "노년 남성의 의복행동과 신체이미지가 삶의 질에 미치는 영향", 한국의류학회지, 38(5), pp.654~664 (2014), 한국의류학회
- 전성연, "가상착의 시스템을 이용한 여고생의 보디스 원형 개발", 한국의류산업학회지, 21(2), pp.825~838 (2019), 한국의류산업학회[DOI]
- Ju, K. S., "Usage & education of the CLO 3D virtual clothing program in the development office & academic", Fashion Information and Technology, 13, pp.51~59 (2016)
- Kim, J. E., "A study on the development of outdoor wear for active senior males-Focused on males aged 55~69-", Doctor, pp.2015
- 김민정, "남성의 클래식핏과 슬림핏 셔츠 패턴 비교 분석에 관한 연구 - 3D 가상착의를 활용하여 -", 복식문화연구, 22(2), pp.209~224 (2014), 복식문화학회[DOI]
- 김미령, "중·고령자의 노후연령인지 및 차이연령 영향 연구 : 여성과 남성의 비교", 한국사회복지조사연구, 44, pp.53~78 (2015), 사회복지연구소[DOI]
- Kim, O. K., "남성복 패턴디자인" (2004), Kyungchunsa
- 제5차 한국인 인체치수 조사사업보고서, "Korean Agency for Technology and Standards", Ministry of Trade, Industry and Energy, ~ (2004)
- "비만치료 지침 2012" (2012)[URL]
- 임지영, "3D 가상착의 시스템에 의한 아동후기 비만여아의 슬랙스 원형 설계", 복식문화연구, 23(4), pp.616~627 (2015), 복식문화학회[DOI]
- Nam, Y. J., "남성복 패턴메이킹" (2005), Kyohakyongusa
- "비만백서 2018" (2018)[URL]
- Ryu, H. S., "여성복 패턴메이킹" (2001), Suhaksa
- 성옥진, "노년 비만남성의 체형연구를 통한 실버 의류산업 활성화 기반 구축", 복식문화연구, 26(5), pp.665~678 (2018), 복식문화학회[DOI]
- Yi, K. H., "국내 실버의류시장의 현황과 과제", Proceeding of The Korean Society of Human Ecology, 2003, pp.27~40 (2003)