A 5kHz Bandwidth Low Noise Chopper-Stabilized Dual-Band Selective Filter SoC
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, various blocks and structures applied to the low-noise 2 band selection band pass filter are described. In the proposed band pass filter when the frequency is input through the buffer, one of Band 1 or Band 2 can be selected using the switch, and the output goes through the buffer after the selected switch among Band 1 and Band 2. After the pre-amplifier, the low frequency band pass filter is used to secure -3 dB or more at 29.5 kHz (5 kHz range) and is used to secure -1 dB or more at 39.5 kHz (5 kHz range). The aim is to remove the interference between bands by -20 dB or more at the interference frequencies of 29.5 Hz and 39.5 Hz, which are the center frequencies of each band. Chopper structure was used to reduce noise, and it was designed to drop more than -21dB/√Hz in Band1,2.
Abstract
In this paper, various blocks and structures applied to the low-noise 2 band selection band pass filter are described. In the proposed band pass filter when the frequency is input through the buffer, one of Band 1 or Band 2 can be selected using the switch, and the output goes through the buffer after the selected switch among Band 1 and Band 2. After the pre-amplifier, the low frequency band pass filter is used to secure -3 dB or more at 29.5 kHz (5 kHz range) and is used to secure -1 dB or more at 39.5 kHz (5 kHz range). The aim is to remove the interference between bands by -20 dB or more at the interference frequencies of 29.5 Hz and 39.5 Hz, which are the center frequencies of each band. Chopper structure was used to reduce noise, and it was designed to drop more than -21dB/√Hz in Band1,2.
참고문헌 (8)
- P. Chauhan, "Dual band band-pass filter using cascaded split ring resonator", 2017 3rd International Conference on Advances in Computing,Communication & Automation (ICACCA)(Fall), pp.1~5 (2017)
- D. G. Stănescu, "Designing, simulation and testing of low current passive filters used in the didactic activity", 2017International Conference on Modern Power Systems (MPS), pp.1~4 (2017)
- F. Teberio, "Meandered corrugated waveguide low-pass filter", 2017 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWSAMP), pp.1~3 (2017)
- S. A. Jadhav, "Designing of stepped impedance Butterworth and Chebyshev filters for wireless communication", 2017IEEE Applied Electromagnetics Conference (AEMC), pp.1~2 (2017)
- H. Suwaki, "A very small MMIC variable filter based on a new active filter design concept", 12th Annual Symposium on Gallium Arsenide Integrated Circuit (GaAs IC), pp.93~96 (1990)
- J. H. F. Ritzerfeld, "Noise gain expressions for low noise second-order digital filter structures", IEEE Transactions on Circuits and Systems II : Express Briefs, 52(4), pp.223~227 (2005)
- C. Stanescu, "Optimizing frequency compensation in chopper offsetstabilized amplifiers with symmetrical RC notch filters", 2015 International Semiconductor Conference (CAS), pp.167~170 (2015)
- C. Stanescu, "Symmetrical passive RC notch filter with two cutoff frequencies for ripple reduction in chopper offset-stabilized amplifiers", 2014 International Semiconductor Conference (CAS), pp.215~218 (2014)