코팅된 분포형 광섬유 센서의 변형률 전달률
Strain Transmission Ratio of a Distributed Optical Fiber Sensor with a Coating Layer
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
본 연구에서는 구조물에 부착된 분포형 광섬유 센서의 변형률을 정밀하게 분석하기 위해 위치에 따른 변형률의 변화를 고려하여 광섬유 센서의 변형률 전달률을 분석하였다. 표면에 부착된 코팅된 광섬유 센서의 모델로부터 해석적으로 광섬유 센서의 변형률 전달률을 유도하였으며, 유도된 변형률 전달률은 유한요소해석을 통해수치적으로 해석한 결과와 비교 검증하였다. 주 구조물의 변형률이 동일한 파장을 가지며 변하는 경우 센서의 변형률 전달률은 위치에 따라 동일한 값을 보였으며, 따라서 변형률 분포의 형상은 왜곡되지 않는다. 하지만 위치에 따라 변형률 파장이 변하면 변형률의 전달률이 위치에 따라 달라져 변형률 분포의 형상이 왜곡될 수 있음을확인하였다. 본 연구를 통해 얻어진 파장에 따른 변형률 전달률은 분포형 광섬유 센서로부터 주 구조물의 변형률분포를 정밀하게 추정하는데 유용하게 사용될 것으로 기대된다.
Abstract
We investigate strain transmissions of a surface bonded distributed optical fiber sensor considering strain variation according to positions. We first derive a strain transmission ratio depending on a wavelength of a strain distribution of the host structure from an analysis model. The strain transmission ratio is compared with numerical results obtained from the finite element method using ABAQUS. We find that the analytical results agree well with the numerical results. The strain transmission ratio is a function of a wavelength, i.e. the strain transmission ratio decreases (increases) as the wavelength of the host strain decreases (increases). Therefore, if an arbitrary strain distribution containing various wavelengths is given to a host structure, a distorted strain distribution will be observed in the distributed optical fiber sensor compare to that of the host structure, because each wavelength shows different strain transmission ratio. The strain transmission ratio derived in this study will be useful for accurately identifying the host strain distribution based on the signal of a distributed optical fiber sensor.
참고문헌 (16)
- Meo, M, "Detecting Damage in Composite Material Using Nonlinear Elastic Wave Spectroscopy Methods", Journal of Composite Materials, 15(3), pp.115~126 (2008)
- Ansari, F, "Mechanics of Bond and Interface Shear Transfer in Optical fiber Sensors", Journal of Engineering Mechanicss, 124(4), pp.385~394 (1998)
- Lau, K.T, "Strain Monitoring in FRP Laminates and Concrete Beams Using FBG Sensors", Journal of Composite Structures, 51(1), pp.9~20 (2001)
- Takeda, N, "Optical Fiber Sensor Based Life Cycling Monitoring and Quality Assessment of Carbon Fiber Reinforced Polymer Matrix Composite Structures", Journal of SPIE : Optical Fiber Sensors Conference, 10323, pp.1032315.1~1032315.4 (2017)
- Choi, B.-H, "Strain Pattern Detection of Composite Cylinders Using Optical Fibers after Low Velocity Impacts", Journal of Composites Science and Technology, 154(18), pp.64~75 (2018)
- 장병욱, "광섬유 브래그 격자 센서를 이용한 복합재 구조물의 충격 모니터링 기법 연구", Composites Research, 24(1), pp.24~30 (2011), 한국복합재료학회
- Ryu, C. Y, "Detection of Matrix Cracking in Composite Laminates Using an Optical Fiber Sensor", Journal of the Korean Society for Composite Materials, 9(1), pp.27~40 (1996)
- Bang, H.-J, "Simultaneous Sensing of Failure and Strain in Composites Using Optical Fiber Sensors", Journal of the Korean Society for Composite Materials, 14(5), pp.12~19 (2001)
- Maaskant, R, "Fiber-optic Bragg Grating Sensors for Bridge Monitoring", Journal of Cement and Concrete Composites, 19, pp.21~33 (1997)
- Di Sante, R, "Fibre Optic Sensors for Structural Health Monitoring of Aircraft Composite Structures : Recent Advances and Applications", Journal of Sensors, 15(8), pp.18666~18713 (2015)
- Im, J, "Aluminum-thin-film Packaged Fiber Bragg Grating Proves for Monitoring the Maximum Tensile Strain of Composite Materials", Journal of Applied Optics, 53(17), pp.3615~6320 (2014)
- Kim, S.-W, "Damage Evaluation and Strain Monitoring for Composite", Cylinders Using posites Part B, 74, pp.13~22 (2015)
- Kim, S.W, "Determination of the Maximum Stresses Experienced by Composite Structures Using Metal Coated Optical Fiber Sensors", Journal of Composites Science and Technology, 78, pp.48~55 (2013)
- 조성인, "Strain Transmission Characteristics of Packaged Fiber Bragg Grating Sensors for Structural Health Monitoring", 비파괴검사학회지, 30(3), pp.236~243 (2010), 한국비파괴검사학회
- Cho S. -I, "Effects of Bonding Layer Characteristics on Strain Transmission and Bond Fatigue Performance", Journal of Adhesion Science and Technology, 26, pp.1325~1339 (2012)
- Her, S.C, "Effect of Coating on the Strain Transfer of Optical Fiber Sensors", Journal of Sensors, 11(7), pp.6926~6941 (2011)