광섬유 브래그 격자의 제작 방법에 따른 기계적 강도 특성
Mechanical Strength Characteristics of Fiber Bragg Gratings with Fabrication Process
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
광섬유 브래그 격자를 이용한 모니터링 연구는 시편 단위의 연구뿐만 아니라 최근 2차 구조물을 비롯하여 주 구조물로까지 그 적용 영역이 점차 확대되고 있어 신뢰성에 대한 검증이 더욱 중요해지고 있다. 본 연구에서는 광섬유 브래그 격자의 제작 방법과 반사율에 따른 기계적 강도 특성을 다양한 격자의 길이에 대해 고찰하였다. 인장 시험을 통해 광섬유는 피복 제거만으로도 약 50 % 정도의 강도 저하가 발생하며 피복 제거 방법에 따라 감소량이 달라짐을 확인하였다. 피복이 제거된 광섬유에 브래그 격자를 형성하게 될 경우 반사율과 격자의 길이와는 무관하게 약 55 % 정도의 강도 저하가 발생하였다. 반면, 반사율이 증가할수록 강도의 분산도는 상대적으로 증가하였다.
Abstract
Application fields on structural health monitoring of fiber Bragg gratings (FBGs) are gradually expanded even to a primary structure as well as a secondary structure and a specimen. For the reason, verification for the reliability of FBGs such as signal characteristics and mechanical strength becomes much more important. In this study, mechanical strength characteristics of FBGs with their fabrication process and reflectivity are investigated with various grating lengths. From the results of tension tests, it is shown that the mechanical strength of optical fibers decreases about 50 % just by jacket stripping and the amount of decrease is dependent on stripping methods. About 55 % of mechanical strength of stripped optical fibers decreases if gratings are formed in the core and it is regardless of grating lengths and reflectivity. However, the width of strength distribution increases relative to increases in reflectivity.
참고문헌 (13)
- "Simultaneous monitoring of strain and temperature during and after cure of unsymmetric composite laminate using fiber optic sensors", 12(1), pp.29~35 (2003)
- "Response of Bragg grating fiber-optic sensors when embedded in composite laminates", 62, pp.959~966 (2002)
- "Effect of thermal residual stress on the reflection spectrum from fiber Bragg grating sensors embedded in CFRP laminates", 33, pp.991~999 (2002)
- "Continuous arbitrary strain profile measurements with fiber Bragg gratings", 7, pp.248~256 (1998)
- "Continuous arbitrary strain profile measurements with fiber Bragg gratings", 7, pp.248~256 (1998)
- "Fabrication of fiber Bragg grating sensors with various grating lengths and signal characteristics of reflected spectra" (2004)
- "The influence of hydrogen loading and the fabrication process on the mechanical strength of optical fibre Bragg gratings", 20, pp.241~251 (2002)
- "Fibre strength unaffected by on-line writing of single-pulse Bragg gratings", 33(15), pp.1333~1334 (1997)
- "Efficient Bragg grating fabrication in a fibre through its polymer jacket using near-UV light", 33(15), pp.1331~1333 (1997)
- "Highly reflective fiber Bragg gratings written through a vinyl ether fiber coating", 11(7), pp.833~835 (1999)
- "Bragg gratings fabricated in monomode photosensitive optical fiber by UV exposure through a phase mask", 62(10), pp.1035~1037 (1993)
- "Acid stripping of fused silica optical fibers without strength degradation", 15(3), pp.490~497 (1997)
- "Proc. of the 6th Annual Inter." (1999)