A Resistance Deviation-To-Time Interval Converter Based On Dual-Slope Integration
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
A resistance deviation-to-time interval converter based on dual-slope integration using second generation current conveyors (CCIIs) is designed for connecting resistive bridge sensors with a digital system. It consists of a differential integrator using CCIIs, a voltage comparator, and a digital control logic for controlling four analog switches. Experimental results exhibit that a conversion sensitivity amounts to 15.56 μs/Ω over the resistance deviation range of 0-200 Ω and its linearity error is less than 0.02%. Its temperature stability is less than 220 ppm/℃ in the temperature range of －25-85℃. Power dissipation of the converter is 60.2 mW.
Abstract
A resistance deviation-to-time interval converter based on dual-slope integration using second generation current conveyors (CCIIs) is designed for connecting resistive bridge sensors with a digital system. It consists of a differential integrator using CCIIs, a voltage comparator, and a digital control logic for controlling four analog switches. Experimental results exhibit that a conversion sensitivity amounts to 15.56 μs/Ω over the resistance deviation range of 0-200 Ω and its linearity error is less than 0.02%. Its temperature stability is less than 220 ppm/℃ in the temperature range of －25-85℃. Power dissipation of the converter is 60.2 mW.
참고문헌 (11)
- W. -S. Chung., "A temperature difference-to-frequency converter using resistance temperature detectors", IEEE Trans. Instrum. Meas, 39(4), pp.676~677 (1990)
- K. Mochizuki., "A high-resolution, linear resistance-to-frequency converter", IEEE Trans. Instrum. Meas, 45(3), pp.761~764 (1996)
- H. Q. Liu., "A low-power wide-range interface circuit for nanowire sensor array based on resistance-to-frequency conversion technique", ISIC 09, 2, pp.13~16 (2009)
- H. kim., "A resistance deviation-to-pulsewidth converter for resistive sensors", IEEE Trans. Instrum. Meas, 58, pp.397~400 (2009)
- T. Islam., "Relaxation oscillator based active bridge circuit for linearly converting Resistance to frequency of resistive sensor", IEEE Sensors, 13, pp.1507~1513 (2013)
- P. Kabara., "CMOS low-noise signal conditioning with a novel differential “resistance to frequency", converter for resistive sensor applications,” SoC Design Conference 2011 International, pp.298~301 (2011)
- 신재규, "Resistance Deviation-to-Frequency Converter for Resistive Bridge Sensors", 한국정보기술학회논문지, 12(12), pp.25~30 (2014), 한국정보기술학회[DOI]
- L. G. Fasoli., "A general circuit for resistive bridge sensors with bitstream output", IEEE Trans. Instrum. Meas, 46, pp.954~960 (1997)
- S. Vlassis., "A signal conditioning circuit for piezoresistive pressure sensors with variable pulse-rate output", Analog Integrated Circuits and Signal Processing, 23, pp.153~162 (2000)
- H. -S. Kim., "A Resistance Deviation-To-Time Interval Converter Using Second Generation Current Conveyors", Computer Applications for Communication, Networking, and Digital Contents Communications in Computer and Information Science, 350, pp.131~136 (2012)
- C. Toumazou., "Anaolog IC design : The current-mode approach", pp.15~ (1990), Peter Peregrinus Ltd.