표면처리에 따른 Hastelloy X 합금의 고온물성
High temperature properties of surface-modified Hastelloy X alloy
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
고온 열수송용 재료로 이용되는 Hastelloy X의 표면처리에 따른 고온물성 개선에 대한 연구를 수행하였다. Hastelloy X 기판 상에 각각 PVD법인 Arc discharge 및 Sputtering을 이용하여 TiAlN 및 Al2O3 박막을 표면 코팅(overlay coating) 하였고, 분위기 분말을 이용하여 Al을 금속표면을 통해 확산시키는 방법인 Pack cementation법을 이용한 Al 확산코팅(diffusion coating: aluminiding)법을 이용한 표면처리를 수행하였다. 이들 표면처리가 Ni-Cr계 합금의 고온열처리에서 생성되는 두꺼운 불균질 산화물(Cr2O3)형성 억제에 미치는 효과와 조성 및 표면미세구조가 물성에 미치는 영향에 대해 알아보기 위해, 표면처리 된 Hastelloy X 샘플들을 공기 및 헬륨가스 분위기에서 1000oC로 열처리 하였으며, 열처리된 전후 시편들에 대해 상형성, 미세구조 및 고온 물성 변화를 측정하였다. 이러한 실험결과를 통하여 표면코팅법에 의한 TiAlN 및Al2O3 박막에 비해 Al 확산코팅한 경우 두꺼운 불균질 산화물(Cr2O3)형성이 억제되어 보다 균질한 미세구조와 높은 내마모성 등 높은 고온 안정성을 보여주는 것을 확인할 수 있었다.
Abstract
Surface treatments and their effects on high temperature properties for the Hastelloy X, which is a promising candidate alloy for high temperature heat-transport system, have been evaluated. For TiAlN and Al2O3 overlay coatings, the two different PVD (physical vapor deposition) methods using an arc discharge and a sputtering, were applied, respectively. In addition, a different surface treatment method of the diffusion coating by a pack cementation of Al (aluminiding) was also adopted in this study. To achieve enhanced thermal oxidation resistance at 1000oC by suppressing the inhomogeneous formation of thick Cr2O3 crust at the surface region, a study for the surface modification methods on the morphological and structural properties of Hastelloy X substrates has been conducted. The structural and compositional properties of each sample were characterized before and after heat-treatment at 1000oC under air and He environment. The results showed that the Al diffusion coating showed the more enhanced high temperature properties than the overlay coatings such as the suppressed thick Cr2O3 crust formation and lower wear loss.
참고문헌 (11)
- "Next Generation Nuclear Plant Materials Research and Development Program Plan", INEEL, 2004
- T. Takizuka, "Reactor technology development under the HTTR project", Progress Nucl. Energy, 47(1), pp.283~ (2005)
- P.R. Sahn, "High Temperature Materials in Gas Turbines" (1974), Elsevier
- M. Shindo, "Evaluation of Al2O3 and TiN coating on Hastelloy XR alloy under aggressive conditions", ISIJ Int, 29, pp.793~ (1989)
- K.A. Gruss, "Adhesion measurement of zirconium nitride and amorphous silicon carbide coatings to nickel and titanium alloys", Surf. Coat. Technol, 114, pp.156~ (1999)
- L. Jian, "Oxidation behavior of superalloys in oxidizing and reducing environments", Corrs. Sci, 42, pp.1573~ (2000)
- T. Takeda, "Air vent in water chamber and surface coating on liner slides concerning auxiliary cooling system for the high temperature engineering test reactor", Nucl. Eng. Des, 185, pp.229~ (1998)
- 이병우, "Thermal oxidation behavior of ceramic-coated Ni-Cr-base superalloys", SURFACE COATINGS TECHNOLOGY, 202(22-23), pp.5625~5628, ELSEVIER SCIENCE SA
- A. von Richthofen, "Composition, binding states, structure, and morphology of the corrosion layer of an oxidized Ti0.46Al0.54N film", Thin Solid Films, 312, pp.190~ (1998)
- C.T. Huang, "Stress and oxidation behaviors of r.f.-sputtered (Ti,A1)N films", Surf. Coat. Technol, 81, pp.164~ (1996)
- A. Mitsuo, "Improvement of high-temperature oxidation resistance of titanium nitride and titanium carbide films by aluminum ion implantation", Surf. Coat. Technol, 103, pp.98~ (1998)