Mg 합금의 PEO 공정 조건에 따른 산화피막 결정상과 내부식성에 대한 연구 I. 결정상
Correlation between crystalline phase and corrosion resistance of Mg alloy with different PEO conditions. I. Crystalline phase
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
내부식성이 약해서 응용이 제한되고 있는 Mg 합금 AZ31과 AZ91의 내부식성을 향상시키기 위하여 Na-P 및 Na-Si 전해액을 사용하여 공정조건에 따라 PEO 처리를 하여 표면 피막의 결정상과 morphology를 관찰하였다. PEO 처리한 표면 산화피막에서 가장 흔히 발견되는 결정상은 MgO이며 비정질상의 존재도 알 수 있었다. 전해액에서부터 비롯된 Na, P 및 Si 성분이 산화피막의 형성에 첨가되어 Na 3.59 Mg 2.71 (PO 4 ) 3 상과 Mg 2 SiO 4 결정상이 관찰되었다. 산화표면은 PEO 처리 전압, 전해질 농도, 처리 시간에 따라서 기공율이 감소하다가, 이후 기공율과 기공의 크기가 증가하는 경향을 관찰할 수 있 었다.
Abstract
To increase corrosion resistance of Mg alloy, AZ31 and AZ91 were PEO treated with different applied voltage and time conditions. We used Na-P and Na-Si system electrolyte. Crystalline phase and morphology were investigated. MgO was Most common crystal phase and vitreous phase could be found. Crystalline phase of Na 3.59 Mg 2.71 (PO 4 ) 3 and Mg 2 SiO 4 also could be found. Porosity of oxidized surface tends to decrease with increasing PEO applied voltage, treat time and concentration of electrolyte, after then, size of pore increased and total number of pore decreased, distinctly.
참고문헌 (17)
- B.L. Mordike, "Magnesium: Propertiesapplications-potential", Mat. Sci. and Eng., A302, pp.37~ (2001)
- G.L. Song, "Corrosion mechanisms of magnesium alloys", Adv. Eng. Mat., 1, pp.11~ (1999)[DOI]
- H.F. Guo, "Effect of surfactants on surface morphology of ceramic coatings fabricated on magnesium alloys by micro-arc oxidation", Thin Solid Films, 500, pp.186~ (2006)[DOI]
- Y. Ma, "Systematic study of the electrolytic plasma oxidation process on a Mg alloy for corrosion protection", Thin Solid Films, 494, pp.296~ (2006)[DOI]
- A.L. Yerokhin, "Plasma electrolysis for surface engineering", Surface and Coating Technol., 122, pp.73~ (1999)[DOI]
- 김배연, "알루미늄 PEO 코팅의 결정상에 미치는 공정 조건에 대한 연구 I. Unipolar 펄스와 코팅시간", 한국결정성장학회지, 24(2), pp.59~64 (2014), 한국결정성장학회[DOI]
- 김배연, "알루미늄 PEO 코팅의 결정상에 미치는 공정 조건에 대한 연구 II. Bipolar 펄스와 전해액", 한국결정성장학회지, 24(2), pp.65~69 (2014), 한국결정성장학회[DOI]
- Y. Gao, "DC plasma electrolytic oxidation of biodegradable cp-Mg: In-vitro corrosion studies", Surface & Coatings Technol., 234, pp.132~ (2013)[DOI]
- G. Lv, "Effect of additives on structure and corrosion resistance of plasma electrolytic oxidation coatings on AZ91D magnesium alloy in phosphate based electrolyte", Surface & Coatings Technol., 205, pp.S36~ (2010)[DOI]
- S. Wang, "Preparation and performance of MAO coatings obtained on AZ91D Mg alloy under unipolar and bipolar modes in a novel dual electrolyte", Ceramics International, 40, pp.93~ (2014)[DOI]
- H.M. Wang, "Corrosion resistance and microstructure characteristics of plasma electrolytic oxidation coatings formed on AZ31 magnesium alloy", Surface Eng., 26, pp.85~ (2010)
- R. Arrabal, "Corrosion resistance of WE43 and AZ91D magnesium alloys with phosphate PEO coatings", Corrosion Sci., 50, pp.1744~ (2008)[DOI]
- Y. Mori, "Characteristics and corrosion resistance of plasma electrolytic oxidation coatings on AZ31B Mg alloy formed in phosphate - silicate mixture electrolytes", Corrosion Sci., 88, pp.254~ (2014)[DOI]
- Z.P. Yao, "Effect of PEO power modes on structure and corrosion resistance of ceramic coatings on AZ91D Mg alloy", Surface Eng., 28, pp.6~ (2012)
- R.O. Hussein, "Influence of process parameters on electrolytic plasma discharging behavior and aluminum oxide coating microstructure", Surface and Coatings Technol., 205, pp.1659~ (2010)[DOI]
- H.F. Guo, "Growth of ceramic coatings on AZ91D magnesium alloys by micro-arc oxidation in aluminate-fluoride solutions and evaluation of corrosion resistance", Appl. Surface Sci., 246, pp.229~ (2005)[DOI]
- P.B. Srinivasan, "Effect of current density on microstructure and corrosion behavior of plasma electrolytic oxidation treated AM50 magnesium alloy", Appl. Surface Sci., 255, pp.4212~ (2009)[DOI]