본문 바로가기
KERD
논문KCI 등재

구리 합금 부산물에서의 주석과 니켈의 분리

Separation of Nickel and Tin from copper alloy dross

2

조회

0

다운로드

3

인용

0

참고문헌

키워드

주제분류재료공학

초록

최근 금속자원 재활용과 환경보호에 대한 기술적 필요성에 의해 구리(Cu)를 주성분으로 하는 동합금으로부터니켈, 주석 등의 유가금속의 분리/회수에 대한 관심이 높아지고 있다. 본 연구에서는 기존에 발표한 니켈과 주석의 분리연구 결과를 토대로 보다 높은 농도로 분리할 수 있는 공정을 검토하였다. 니켈의 경우 유기용매를 이용하여 동합금에서 니켈을 선택적으로 분리한 후 환원열처리를 통하여 순도 98.0 % 이상의 니켈 금속분말을 성공적으로 제조하였다. 주석의 경우에는 3회의 연속적인 선택적 용해법과 환원열처리를 통하여 주석 분말의 농도를 97.5 % 이상으로 향상시켰다. 제조된 분말의 FE-SEM 및 TEM 분석을 통하여 미세구조 변화여부를 분석하였다.

Abstract

Recently, the demands for separation/recovery of valuable metals such as nickel or tin from copper based alloyshas been attracting much attention from the viewpoints of environmental protection and resource utilization. In this report,experimental results on concentration increasement of nickel and tin compared to the previous report are investigated. Ni issuccessfully separated by a organic solvent and reduced to the metal powder whose concentration is over 98 %. Sn isseparated by a selective solution method and its concentration is increased to 97.5 % by three consecutive solution andreduction process. Crystal structure, surface morphology and microstructure of the separated samples are studied.

참고문헌 (15)

  1. L.E.O.C. Rodrigues, "Hydrometallurgicalseparation of rare earth elements, cobalt and nickelfrom spent nickel-metal-hydride batteries", J. PowerSources, 195, pp.3735~ (2010)
  2. B.S. Kim, "The fundamental study on theseparation of cobalt and nickel from copper based moltenalloys", J. of the Korean Inst. of Met. & Mater, 31, pp.1355~ (1993)
  3. A. Agrawal, "Recovery of nickel powder from copper bleedelectrolyte of an Indian copper smelter by electrolysis", Powder Technology, 177, pp.133~ (2007)
  4. 金成奎, "溶媒抽出法에 의한 鍍金廢水중 重金屬의 分離(), 回收에 관한 硏究", 자원리싸이클링, 12(1), pp.25~32 (2003), 한국자원리싸이클링학회
  5. D. Banerjee, "Metal recovery from blast furnace sludgeand flue dust using leaching technologies", Res. J. Chem. Environ, 11, pp.18~ (2007)
  6. A. Agrawal, "Solid wastemanagement in non-ferrous industries in India", Res. Conserv. Rec, 42, pp.99~ (2004)
  7. L. Chou, "Influence of SnO2-doped W-Mn", SiO2 for oxid ativeconversion of methane to high hydrocarbons at elevatedpressure, 2003, pp.238, 185~
  8. Y. Shimizu, "Basic aspects and challengesof semiconductor gas sensors", MRS Bull, 24, pp.18~ (1999)
  9. P.T. Wierzchowski, "Kinetics of catalyticoxidation of carbon monoxide and methane combustionover alumina supported Ga2O3, SnO2 or V2O5", Appl. Catal. B, 44, pp.53~ (2003)
  10. V. Sridhar, "Separation ofnickel from copper in ammoniacal", ammonium carbonatesolution using ACORGA M5640 by selective stripping, 2010, pp.23, 454~
  11. 이정일, "킬레이트 수지를 이용한 구리 합금 부산물에서의 니켈의 농축 및 분리", 한국결정성장학회지, 23(2), pp.114~118 (2013), 한국결정성장학회
  12. 이정일, "A simple route for synthesis of SnO2 from copper alloy dross", 한국결정성장학회지, 24(2), pp.84~87 (2014), 한국결정성장학회[DOI]
  13. 안재우, "염산용액에서 Alamine 336에 의한 주석(IV)의 용매추출", 대한금속·재료학회지, 48(10), pp.929~935 (2010), 대한금속·재료학회
  14. R.K. Biswas, "Solvent extraction ofcopper by purified Cyanex 272", Ind. J. Chem. Technol, 14(3), pp.269~ (2007)
  15. Q. Liu, "Effect of reaction driving force on copper nanoparticlespreparation by aqueous solution reduction method", Materials Transactions, 51(8), pp.1386~ (2010)

관련 논문AI추천

이 간행물의 다른 논문 (7건)