본문 바로가기
KERD
논문KCI 등재

실리콘 단결정 잉곳 제조용 석영유리 도가니 내 기포 품질평가를 위한 가속시험

Accelerated testing for evaluating bubble quality within quartz glass crucibles used for manufacturing silicon single crystal ingots

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류재료공학

초록

석영유리 도가니 (QC)의 사용 중 기포 품질을 검증하기 위하여 적절한 가속 시험 방법을 제안하였다. 실제 Czochralski(Cz) 공정에서 얻어진 폐기물 도가니의 기포 상태를 분석하고 QC 시험편을 이용하여 온도, 압력, 시간을 변화시켜 최적의 열처리 조건을 제시하였다. Cz 공정에서 생성되는 유사한 기포 크기와 밀도로 제어하기 위해서는 1450°C, 0.4 Torr 및 40 시간의 열처리 조건이 적절하였다 . 특히 Cz 공정에서 적용하는 압력인 10~20 Torr보다 상대적으로 낮은 압력인 0.4 Torr를 선택함으로써 기포 형성 가속시험의 시간을 단축시킬 수 있었다. 열처리 온도를 1550°C 높일 경우, Ostwald ripening 현상으로 인하여 기포가 커지고 밀도가 급격히 낮아지며, 결정화 발생으로 적절한 가속시험 조건은 아닌 것으로 판단하였다 .

Abstract

To verify the quality of bubbles during the use of quartz glass crucibles (QC), an appropriate accelerated testing method was proposed. The bubble state of discarded waste crucibles obtained from actual Czochralski (Cz) processes wasanalyzed, and optimal heat treatment conditions were suggested by varying temperature, pressure, and time using the QC test piece. By subjecting the samples to heat treatment at 1450°C, 0.4 Torr, and 40 hours, it was possible to control the bubble size and density to a similar level as those generated in the actual Cz process. In particular, by selecting a relatively lower pressure of 0.4 Torr compared to the typical range of 10~20 Torr applied in the Cz process, the time required for accelerated bubble formation testing could be reduced. However, it was determined that increasing the heat treatment temperature to 1550°C led to the phenomenon of Ostwald ripening, resulting in larger bubbles and a rapid decrease in density. Therefore, it was concluded that it was not a suitable condition for the desired bake test.

참고문헌 (13)

  1. W. Zulehner, "Czochralski growth of silicon", J. Cryst. Growth, 65, pp.189~ (1983)
  2. R. Bruning, "Method of making quartz glass crucibles, and apparatus carrying out the method", US Patent US44116680A, ~ (1983)
  3. R. E. Chaney, "The erosion of materials in molten silicon", J. Electrochem. Soc, 123, pp.846~ (1976)
  4. 정윤성, "실리콘 단결정 잉곳용 석영유리 도가니의 brownish ring에 대한 연구", 한국결정성장학회지, 32(3), pp.115~120 (2022), 한국결정성장학회[DOI]
  5. W. von Ammon, "Hand. Cryst. Growth", pp.45~ (2014), Elsevier
  6. O. Paulsen, "Bubble distribution in fused quartz crucibles studied by micro X-Ray computational tomography. comparing 2D and 3D analysis", J, Cryst. Growth, 520, pp.96~ (2019)
  7. A. Staudt, "Verfahren fur die Herstellung eines Quarzglastiegels mit transparenterInnenbeschichtung aus synthetisch erzeugtem Quarzglas", Germany PatentDE102010045934B4, ~ (2012)
  8. S. S. Zumdahl, "Chemistry", pp.482~ (2011), Houghton
  9. P. W. Voorhees, "The theory of Ostwald ripening", J. Stat. Physics, 38, pp.231~ (1985)
  10. A. D. Le Claire, "Diffusion in solids, liquids, gases", pp.558~ (1952), Academic Press Inc., Publishers
  11. W. Bernhard, "Fetal and Neonatal Physiology, vol 1", pp.813~ (2017)
  12. 임종원, "단결정 실리콘 제조용 석영유리도가니의 결정화에 대한 연구", 한국결정성장학회지, 28(3), pp.99~105 (2018), 한국결정성장학회[DOI]
  13. A. Hirsch, "Investigation of gas bubble growth in fused silica crucibles for silicon Czochralski crystal growth", J. Cryst. Growth, 553, pp.125~ (2020)

관련 논문AI추천

이 간행물의 다른 논문 (5건)