A Single-Pole, Eight-Throw, Radio-Frequency, MicroElectroMechanical Systems Switch for Multi-Band / Multi-Mode Front-End Module
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This paper presents a single-pole eight-throw(SP8T) switch based on proposed a radio-frequency(RF) microelectromechanical systems (MEMS) switches. The proposed switch was driven by a double stop(DS) comb drive, with a lateral resistive contact. Additionally, the proposed switch was designed to have tapered signal line and bi-directionally actuated. A forward actuation connects between signal lines and contact part, and the output becomes on-state. A reverse actuation connects between ground lines and contact part, and the output becomes off-state. The SP8T switch of 3-stage tree topology was developed based on an arrangement of the proposed RF MEMS switches. The developed SP8T switch had an actuation voltage of 12 V, an insertion loss of 1.3 dB, a return loss of 15.1 dB, and an isolation of 31.4 dB at 6 GHz.
Abstract
This paper presents a single-pole eight-throw(SP8T) switch based on proposed a radio-frequency(RF) microelectromechanical systems (MEMS) switches. The proposed switch was driven by a double stop(DS) comb drive, with a lateral resistive contact. Additionally, the proposed switch was designed to have tapered signal line and bi-directionally actuated. A forward actuation connects between signal lines and contact part, and the output becomes on-state. A reverse actuation connects between ground lines and contact part, and the output becomes off-state. The SP8T switch of 3-stage tree topology was developed based on an arrangement of the proposed RF MEMS switches. The developed SP8T switch had an actuation voltage of 12 V, an insertion loss of 1.3 dB, a return loss of 15.1 dB, and an isolation of 31.4 dB at 6 GHz.
참고문헌 (8)
- 박재형, "정전 구동형 RF MEMS 스위치의 설계 및 제작에 관한 연구", 센서학회지, 19(4), pp.320~327 (2010), 한국센서학회
- J. Lee, "A low-loss single-pole six-throw switch based on compact RF MEMS switches", IEEE Trans. Microw. Theory Tech, 53(11), pp.3335~3344 (2005)
- 강성찬, "금", 주석 공융점 접합과 유리 기판의 건식 식각을 이용한 고주파 MEMS 스위치의 기판 단위 실장, 2011, pp.20(1), 58~63[DOI]
- G. L. Tan, "Low-loss 2-and 4-bit TTD MEMS phase shifters based on SP4T switches", IEEE Trans. Microw. Theory Tech, 51(1), pp.297~304 (2003)
- A. Q. Liu, "Single-pole-four-throw switch using high-aspect-ratiolateral switches", Electronics Letters, 40(18), pp.1125~1126 (2004)
- S. Pranonsatit, "Rotary RF MEMS switch based on the wobble motorprinciple", Proc. MEMS, pp.886~889 (2006)
- S. Kang, "A low-loss,singlepole,four-throw RF MEMS switch driven by a double stop comb drive", Journal of Micromech. and Microeng, 19(3), pp.35011~ (2009)
- S. Lee, "A singlepole nine-throw antenna switch using radio-frequency microelectromechanical systems technology for broadband multi-mode and multi-band front-ends", J. Micromech. Microeng, 18(1), pp.15012~ (2008)