본문 바로가기
KERD
논문KCI 등재

불산 처리 시간이 강화형 전부도재관과 레진 시멘트의 전단 결합강도에 미치는 영향

EFFECT OF ETCHING TIME ON SHEAR BOND STRENGTH OF RESIN CEMENTS TO REINFORCED ALL-CERAMIC CROWNS

박찬운|안승근|최근배|김경일
대한치과보철학회 (The Korean Academy Of Prosthodontics)|2004.10|대한치과보철학회지 (The Journal of Korean Academy of Prosthodontics)|제42권 제5호|pp. 501-513

3

조회

0

다운로드

0

인용

0

참고문헌

주제분류치의학

초록

Abstract

Purpose: The purpose of this study was to evaluate the effects of etching time on shear bond strength of four resin cements to IPS Empress 2 ceramic. Material and Methods: Forty rectangular shape ceramic specimens (10×15×3.5mm size) were used for this study. The ceramic specimens divided into four groups and were etched with 10% hydrofluoric acid for 0, 10, 30, 60, 180, 300, 420, 600, and 900 seconds respectively. Etched surfaces of ceramic specimens were coated with ceramic adhesive system and bonded with four resin cement (Variolink II, Panavia F, Panavia 21, Super-Bond C&B) using acrylic glass tube. All cemented specimens were tested under shear loading untill fracture on universal testing machine at a crosshead speed 1mm/min; the maximum load at fracture (kg) was recored. Shear bond strengh data were analyzed with oneway analysis of variance and Tukey HSD tests (p<.05). Etched ceramic surfaces (0-, 60-, 300-, and 600-seconds etching period) and fracture surfaces after shear testing were examined mophologically using scanning electron microscopy. Results: Ceramic surface treatment with 10% hydrofluoric acid improved the bond strength of three resin cement except for Super-Bond C&B cement. Variolink II (41.0±2.4 MPa) resin cement at 300-seconds etching time showed ststistically higher shear bond strength than the other resin cements (Panavia F: 28.3±2.3 MPa, Panavia 21: 21.5±2.2 MPa, Super-Bond C&B: 16.7±1.6 MPa). Ceramic surface etched with 10% hydrofluoric acid for 300 seconds showed more retentive surface texture. Conclusion: Within the limitation of this study, Variolink II resin cement are suitable for cementation of Empress 2 all-ceramic restorations and etching with 10% hydrofluoric acid for 180 to 300 seconds is required to enhance the bond strength.

참고문헌 (29)

  1. "In the light of nature", 16, pp.60~8 (1993)
  2. "Porcelain-fused-to-metalvs, . nonmetal crowns", 130, pp.409~11 (1999)
  3. "Materials science fundamentalsof the IPS Empress 2 glass-ceramic", 12, pp.3~10 (1998)
  4. "IPSEmpress 2: A new pressable high strengthglass-ceramic for esthetic all-ceramicrestorations", 22, pp.143~151 (1999)
  5. "Introducing a lithium disilicateglass-ceramic: IPS Empress 2", 4, pp.1~3 (1999)
  6. "Reaserchevaluations of a lithium disilicated restorativesystem:IPS Empress 2", 4, pp.4~10 (1999)
  7. "Empress 2: First year clinical results", 16, pp.12~15 (1999)
  8. "The Empress 2 system forconservative all-ceramic bridges", 1, pp.22~38 (1999)
  9. , 1987, 206~
  10. "The influence of differentcementation modes on the fractureresistance of feldpathic ceramic crown", 10, pp.169~177 (1999)
  11. , 1987, 207~
  12. "Effect of treatment and storage conditionson ceramic", composite bond strength, 1995, pp.74, 381~387
  13. "Effect of porcelain surfacetreatments on bond strengths of compositeresin bonded to porcelain", 72, pp.355~359 (1994)
  14. "Effect of surfacetreatments of porcelain on the shearbond strength of applied dual-cured cement", 72, pp.85~8 (1994)
  15. "Shearbond strength of resin cements to both ceramicand dentin", 88, pp.277~84 (2002)
  16. "Empress 2 Instruction foruse" (2003)
  17. "Comparison of shear bondstrengths of two resin luting systems fora base and a high noble metal alloy bondedto enamel", 72, pp.457~461 (1994)
  18. "A study of tensile bond strength accordingto varied treatment methods of nonpreciousmetal surface and resin cements", 34, pp.335~348 (1996)
  19. "Influence ofsurface conditions and silane agent onthe bond of resin to IPS Empress 2 ceramic", 16, pp.277~282 (2003)
  20. "A studyon the bond strength of resin cements toEmpress 2 ceramic", 39, pp.184~196 (2001)
  21. "Bonding to glassinfiltrated alumina ceramic: Adhesivemethods and their durability", 73, pp.240~249 (1995)
  22. "The influence of surface treatmentson the shear bond strength to In-Ceramcore", 38, pp.129~146 (2000)
  23. "Super-Bond C&B Instructionfor use" (2003), SUN Medical Co
  24. "Tensile bondstrength of etched porcelain", 62, pp.297~304
  25. , Res1985, 296~
  26. "Shearbond strength of composite bond to etchedporcelain", 66, pp.1460~1465 (1987)
  27. "Shear bond strength of compositeresin to porcelain", 4, pp.17~23 (1991)
  28. , 1993, 1415~1420
  29. "Effectof etchant,etching period,and silanepriming on bond strength to porcelain ofcomposite resin", 23, pp.250~257 (1998)

관련 논문AI추천

불산 에칭 표면처리가 지르코니아와 레진시멘트의 전단결합강도에 미치는 영향강유정한국치위생감염관리학회 · 한국임상치위생학회지2021 · 제9권 제2호다양한 산처리 방법이 lithium Disilicate 도재와 복합레진간의 전단 결합강도에 미치는 영향강대현, 복원미, 송광엽, 송진원, 안승근대한턱관절교합학회 · 구강회복응용과학지2006 · 제22권 제2호Zirconia ceramic의 표면처리 방법이 레진시멘트의 결합강도에 미치는 영향김창훈, 임장섭, 전영찬, 정창모대한치과보철학회 · 대한치과보철학회지2004 · 제42권 제4호불산 식각 농도 및 시간이 lithium disilicate 도재와레진시멘트의 전단결합강도에 미치는 영향박찬운, 서재민, 안승근대한치과보철학회 · 대한치과보철학회지2007 · 제45권 제4호지르코니아 표면 처리와 시멘트 종류에 따른 치면과의 전단 결합 강도 비교 연구김종배, 남기영, 이종혁, 조수현, 조인호, 황상희대한턱관절교합학회 · 구강회복응용과학지2007 · 제23권 제3호지르코니움 세라믹에서 표면 처리 방법이 레진 시멘트의 접착력에 미치는 영향박경석, 조인호대한턱관절교합학회 · 구강회복응용과학지2006 · 제22권 제3호

이 간행물의 다른 논문 (9건)

CAD/CAM system으로 제작한 zirconia core의 적합도성지윤, 임장섭, 정창모, 전영찬pp. 489-500수종의 Post와 IPS-Empress Ingot 두께가 전부 도재 수복물 최종색조에 미치는 영향복원미, 최근배, 안승근, 박찬운pp. 514-523한국 미인의 치아안면구도에 대한 기하학적 분석오상천, 신영호pp. 524-534섬유강화 포스트와 금속주조 포스트의 파절강도 및 파절양상의 비교김석규, 김미경pp. 535-543수종 도재 색조 선택 시스템의 spectrophotometer를 이용한 색조 재현성 평가조인호, 신수연, 김이경pp. 544-555
원문 보기