암석에 대한 라이다 반사강도의 영향 인자 분석
Analysis of Parameters Affecting LiDAR Intensity on Rock
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
이 연구에서는 라이다(LiDAR) 반사강도를 이용하여 암반 풍화도 및 변질도를 산정하는 작업의 기초연구를 진행하였다. 실내 시험을 통하여 라이다 반사강도에 직접적으로 영향을 미치는 인자와 그 영향 정도를 정량적으로 고찰하고자 하였다. 영향 인자로는 주사거리, 입사각, 표면거칠기, 표면색상, 암석물성, 광물조성, 포화도를 선정하였다. 실험에서는 FARO 라이다 장비와 12가지 종류의 시험편을 사용하였다. 실험 결과 반사강도는 표면색상, 입사각, 주사거리, 암석물성, 포화도 혹은 표면습윤상태, 표면거칠기 순으로 영향을 크게 미치는 것으로 나타났다.
Abstract
In this study, a fundamental investigation was made on how to use LiDAR technology to determine the degree of weathering and alteration of rock mass. The purpose of the study was to identify the affecting parameters to LiDAR intensity and to quantitatively assess the relations among them through laboratory-scale experiment. A few potential affecting parameters were selected including scanning distance, incidence angle, surface roughness, surface color, mineral composition, and water saturation. In the experiment, FARO LiDAR unit was used for twelve different types of specimen. It was observed that the intensity was affected by, in the order of importance, surface color, incidence angle, scanning distance, property of rock, water condition, and surface roughness.
참고문헌 (14)
- Bellian, J. A., "Digital outcrop models : applications of terrestrial scanning LIDAR technology in stratigraphic modeling", Journal of Sedimentary Research, 75(2), pp.166~176 (2005)
- Burton, D., "LIDAR intensity as a remote sensor of rock properties", Journal of Sedimentary Research, 81(5), pp.339~347 (2011)
- Coren, F., "Radiometric correction in laser scanning", International Journal of Remote Sensing, 27(15), pp.3097~3104 (2006)
- Ercoli, L., "Measure of a limestone weathering degree using laser scanner", International Journal of Architectural Heritage, 7(5), pp.591~607 (2013)
- "Applications of advanced laser scanning technology in geology" (2020)[URL]
- Franceschi, M., "Discrimination between marls and limestones using intensity data from terrestrial laser scanner", ISPRS Journal of Photogrammetry and Remote Sensing, 64(6), pp.522~528 (2009)
- Kaasalainen, S., "Analysis of incidence angle and distance effects on terrestrial laser scanner intensity : Search for correction methods", Remote Sensing, 3(10), pp.2207~2221 (2011)
- Klise, K. A., "Exploring solute transport and streamline connectivity using LIDAR-based outcrop images and geostatistical representations of heterogeneity", Water Resources Research, 45(5), pp.W05413~ (2009)
- 이수득, "LIDAR를 이용한 암반 절리면의 거칠기 측정에 관한 연구", 터널과 지하공간, 27(1), pp.58~68 (2017), 한국암반공학회[DOI]
- Pesci, A., "Remote sensing of volcanic terrains by terrestrial laser scanner : preliminary reflectance and RGB implications for studying Vesuvius crater(Italy)", Annals of Geophysics, 51(4), pp.633~653 (2008)
- Shin, J. I., "Signal characteristics analysis and normalization of LIDAR intensity data", Master, pp.2007
- Tan, K., "Intensity data correction based on incidence angle and distance for terrestrial laser scanner", Journal of Applied Remote Sensing, 9(1), pp.094094~ (2015)
- Wicaksana, Y., "Prediction of rock cutting performance and abrasiveness considering dynamic properties at intermediate strain rate", Ph. D., pp.2020
- 유완규, "RGB 값을 고려한 레이저 스캐너 반사율과 풍화도의 관계에 대한 연구", 한국산학기술학회논문지, 16(10), pp.7182~7188 (2015), 한국산학기술학회[DOI]