유한차분법과 유한체적법을 이용한 1차원과 2차원 개수로 흐름해석
Analysis of 1D and 2D Flows in Open-Channel with FDM and FVM
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
하천에서의 부정류 해석을 위해서 1차원 유한차분법(FDM)인 Abbott-Ionescu scheme과 2차원 유한체적 법(FVM)인 근사의 Riemann solver(Osher scheme)에 대하여 살펴보았다. 두 모형은 직선 하도, 약간 굽어진 사 행하도 및 사행하도에서의 흐름 문제들에 적용되었으며 결과의 비교는 균일한 직사각형 수로에 대하여 이루어졌 다. 하천의 복잡한 형상의 표현하기 위해서는 이를 고려할 수 있는 유한체적법을 이용하였다. 유한차분법과 유한 체적법 결과는 수위 및 유량 수문곡선에 대하여 매우 만족스러운 것으로 나타났다. 균일한 직선하도에 대해서는 1차원분석으로도 충분하다는 사실을 파악할 수 있었으며, 사행하도의 경우 흐름을 정확하게 모형화하기 위해서는 2차원 또는 3차원 모형을 사용하여야 할 것이다.
Abstract
The one-dimensional (1D) finite-difference method (FDM) with Abbott-Ionescu scheme and the two-dimensional (2D) finite-volume method (FVM) with an approximate Riemann solver (Osher scheme) for unsteady flow calculation in river are described. The two models have been applied to several problems including flow in a straight channel, flow in a slightly meandering channel and a flow in a meandering channel. The uniform rectangular channel was employed for the purpose of comparing results. A comparison is made between the results of computation on 1D and 2D flows including straight channel, slightly meandering channel and meandering channel application. The implementation of the finite-volume method allows complex boundary geometry represented. Agreement between FVM and FDM results regarding the discharge and stage is considered very satisfactory in straight channel application. It was concluded that a 1D analysis is sufficient if the channel is prismatic and remains straight. For curved (meandering) channels, a 2D or 3D model must be used in order to model the flow accurately.
참고문헌 (23)
- Abbott, M. B., "Computational Hydraulics; Elements of the Theory of Free Surface Flows" (1979), Pitman Publishing Limited
- Abbott,M.B., "Computational Fluid Dynamics" (1990), John Wiley
- Alcrudo, F, "A high-resolution Godunov-type scheme in finite volumes for the 2D shallow-water equations", J. Numer. Methods in Fluids, 16, pp.489~505 (1993)
- Chadwick,A, "Hydraulics in Civil and Environmental Engineering" (1998), E & FN Spon
- Chang, H. H., "Fluvial Processes in River Engineering" (1992), Krieger publishing company
- Chaudhry,M.H., "Open-Channel Flow" (1993), Prentice-Hall
- Chow, V. T., "Open-Channel Hydraulics" (1959), McGraw-Hill
- Cunge,J.A., "Practical Aspects of Computational River Hydraulics" (1980), Pitman
- Erduran, K. S, "Internal Report" (1999), University of Newcastle upon T
- Fennema, R. J., "Explicit Methods for 2-D Transient Free-Surface Flows", J. Hydr.Engrg, 116(8), pp.1013~1034 (1990)
- Jeong, Chan, "Comparison of Finite-Difference and Finite-Volume Method in Open-Channel Flows", MSc Thesis University
- Kutija, V, "On the Numerical Modelling of Supercritical Flow", J. Hydraulic Research, 31(6) (1993)
- Kutija,V, "New Improved Gem. Newcastle upon Tyne" (1999), University of Newcastle upon Tyne.
- Mingham, C.G., "High-resolution finite-volume method for shallow water flows", J. Hydr. Engrg, 6, pp.605~617
- Montes,S, "Hydraulics of Open Channel Flow" (1998), ASCE
- Petersen,M.S., "River engineering" (1986), Prentice-Hall
- Rillaer, L. V., "One-Dimensional Model of Unsteady Multy-Regime Flow in Combined Networks. MSc Thesis" (1997), wcatle upon Tyne
- Spekreijse, S. P., "Multigrid solution of steady euler equations. CWI Tract 46, Center for Mathematics and computer Science" (1998), Amsterdam
- Silva, A. M. A. F., "Friction Factor of Meandering Flows", J. Hydr.Engrg, 125(7), pp.779~783 (1999)
- Toro,E.F., "Riemann solvers and numerical methods for fluid dynamics" (1997), Springer
- Wijbenga, J. H. A., "Steady Depth-Averaged Floe Calculations on Curvilinear Grids" (1985), Paper presented at the Hydraulics of Floods and Flood Control
- Zhao, D. H., "Finite-Volume Two-Dimensional Unsteady-Flow Model for River Basins", J. Hydr. Engrg, 120(7), pp.863~882 (1994)
- Zhao, D. H., "Approximate Riemann Solvers in FVM for 2D Hydraulic Shock Wave Modelling", J. Hydr. Engrg, 122(12), pp.692~702 (1996)