화재 및 화재 후 냉각상태의 철근콘크리트 부재 수치해석
A Numerical Model of Reinforced Concrete Members Exposed to Fire and After-Cooling Analysis
0
조회
0
다운로드
10
인용
0
참고문헌
키워드
초록
이 논문은 화재에 노출된 철근콘크리트 구조에 대한 수치해석 모델을 제시하고, 기존의 자료 및 설계 규준과의 비교를 통해 구조물의 설계 시 고려 사항에 대해 제안하고 있다. 수치해석은 비정상 열전달 해석과 비선형 구조해석의 두 단계로 수행되며, 비정상 열전달 해석을 통해서 얻어진 화재시간에 따른 단면 온도분포를 바탕으로 비선형 구조해석하여 부재의 상태에 대한 정보를 얻게 된다. 이때, 철근콘크리트의 재료모델을 화재진행상태(Under-Fire)와 화재종료 후 냉각상태(After- Cooling)로 나뉘어 해석수행하여 각각의 재료상태에 따른 거동의 변화를 살펴본다. 해석된 결과는 여러 구조물에 대해 기존의 실험결과와 비교하여 검증하고, 설계 규준과의 비교를 통해 화재 시 구조물의 안전성에 대해 고찰하였다.
Abstract
This paper introduces a numerical analysis method for reinforced-concrete(RC) members exposed to fire and proposes considerations in designing RC structures on the basis of the comparison between numerical results and design codes. The proposed analysis method consists of two procedures of the transient heat transfer analysis and the non-linear structural analysis. To exactly evaluate the structural behavior under fire, two material models are considered in this paper. One is “Under-Fire” condition for the material properties at the high temperature and the other one is “After-Cooling” condition for the material properties after cooling down to air temperature. The proposed method is validated through the correlation study between experimental data and numerical results. In advance, the obtained results show that the material properties which are fittable to the corresponding temperature must be taken into account for an accurate prediction of the ultimate resisting capacity of RC members. Finally, comparison of the numerical results with the design code of EN1992-1-2 also shows that the design code needs to be revised to reserve the safety of the fire-damaged structural member.
참고문헌 (22)
- Abramowicz, M., "Residual Mechanical Material Properties for The Reassessment of Reinforced Concrete Structures After Fire", The 9th International Conference of Modern Building Materials, Structures, and Techniques, pp.16~18 (2007)
- Anderberg.Y., "Stress and Deformation Characteristics of Concrete, 2-Experimental Investigation and Material Behavior Model", Bulletin, 54, pp.83~ (1976), University of Lund
- ASTM Designation: E119, "Standard Methods of Fire Tests of Building Construction and Materials" (1976), American Society for Testing and Materials
- Bratina, S., "The Effect of Different Strain Contributions on The Response of RC Beams in Fire", Eng. Struct., 29(3), pp.418~430 (2008)
- Chang, Y.F., "Residual Stress-Strain Relationship for Concrete Exposure to High Temperatures", Cement & Concr. Res., 36(10), pp.1999~2005 (2006)
- EN1992-1-2., "EUROCODE2: Design of Concrete Structures Part 1.2: General rules-Structural Fire" (2004), CEN
- Harmathy, T. Z., "A Comprehensive Creep Model", J. Basic Eng., 89(D-3), pp.496~502 (1967)
- Huang, Z., "Three-Dimensional Analysis of Reinforced concrete Beam-Column Structures in Fire", J. Struct. Eng., 135(10), pp.1201~1212 (2009)
- 황진욱, "화재에 손상된 철근콘크리트 부재의 수치모델 및 내화성능해석", 콘크리트학회 논문집, 25(5), pp.497~508 (2013), 한국콘크리트학회[DOI]
- Fire Resistance Test-Elements of Building Construction, "ISO 834", International Organization for Standardization, ~ (1975)
- 김규용, "고온 및 냉각조건에 따른 콘크리트의 역학적특성에 관한 실험적 연구", 한국건축시공학회지, 12(3), pp.323~331 (2012), 한국건축시공학회[DOI]
- Kodur, V.K.R, "A Simplified Approach for Predicting Fire Resistance of Reinforced Concrete Columns under Biaxial Bending", Eng. Struct., 41, pp.428~443 (2012)
- Kwak, H.G., "Analytical Model for Long-Term Behavior of Slender RC Columns", The KSCE J. Civil Eng., 22(2A), pp.365~377 (2011)
- Kwak, H.G., "An Improved Design Formula for a Biaxially Loaded Slender RC Column", Eng. Struct., 32(1) (2010)
- 곽효경, "교량 단면 내 온도분포에 따른 자체평형 열응력 해석", 한국전산구조공학회논문집, 24(5), pp.531~542 (2011), 한국전산구조공학회
- Fire Endurance of Continuous Reinforced Concrete Beams (RD072.01B), "Lin, T.D.", Portland Cement Association, ~ (1981)
- Nassif, Ayman, "Postfire Full Stress-Strain Response of Fire-Damaged Concrete", Fire & Mater., 30(5), pp.323~332 (2006)
- Outinen, J., "Mechanical Properties of Structural Steels at High Temperatures and After Cooling Down" (2007), Helsinki University of Technology
- Sadaoui, A., "Effect of Transient Creep on the behavior of Reinforced Concrete Columns in Fire", Eng. Struct., 31(9), pp.2203~2208 (2009)
- Terro, M.J., "Numerical Modeling of the Behavior of Concrete Structures in Fire", ACI Struct. J., 95(2), pp.183~193 (1998)
- Yang, H., "Effects of Heating and Loading Histories on Post-Fire Cooling behavior of Concrete-Filled Steel Tubular Columns", J. Constr. Steel Res., 64, pp.556~570 (2008)
- Youssef, M.A., "General Stress-Strain Relationship for Concrete at Elevated Temperatures", Eng. Struct., 29(10), pp.2618~2634 (2007)