IGCC 용융 슬래그를 이용한 경량 지오폴리머 제조
Fabrication of lightweight geopolymer based on the IGCC slag
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
본 연구에서는, IGCC(Integrated Gasification Combined Cycle: 석탄가스화 복합발전)에서 배출되는 용융 슬래그로 부터 지오폴리머를 제조하여 알칼리 활성화제의 몰농도, W/S 비(water/ solid ratio), 재령일에 따른 비중과 압축강도 등물리적 특성을 분석함과 동시에 발포제인 Si 슬러지를 첨가하여 경량화 소재로서의 가능성을 고찰하였다. 특히 경량 지오폴리머의 강도 특성향상을 위하여 복합 활성화제 및 pre-curing 공정을 적용하였다. 단일 활성화제를 사용한 경량 지오폴리머의 압축 강도는 9.5 MPa이었으나, 복합 활성화제로 제조할 경우 2~5배 정도의 압축강도 증진 효과를 나타내었다. 더군다나, pre-curing을 실시한 경량 지오폴리머의 경우, pre-curing하지 않은 시편들에 비해 18~48 % 가량 높은 압축강도 값을 보였다. 본 연구에서 복합 활성화제와 pre-curing 공정의 도입으로 얻어진 경량 지오폴리머의 최고 압축강도는 40 MPa(3일 재령하여 밀도가 1.83 g/cm 3인 시편)로서 시멘트 콘크리트에 필적하였다. XRD 결정상 분석과 SEM을 이용한 미세구조 분석을 통하여 지오폴리머 표면에서 C-S-H 겔(sodium silicate hydrate gel)의 모상에 꽃봉오리 모양의 zeolite 결정상이 균일하게분포된 것을 확인할 수 있었다.
Abstract
In this study, a lightweight geopolymer was prepared using by slag discharged from IGCC (Integrated Gasification Combined Cycle) power plant and its physical properties, the density and compressive strength, were analyzed as a function of the concentration of alkali activators, W/S ratio and aging times. Also the possibility of applying it to lightweight materials by adding Si sludge as a foaming agent to the geopolymerg was investigated. In particular, a complex composition of alkali activator and a pre-curing process were applied to improve the strength properties of lightweight geopolymers. While the compressive strength of the lightweight geopolymer using a single activator was 9.5 MPa, the specimen made with a complex composition of alkali activator had compressive strength of 2~5 times higher. In addition, the lightweight geopolymer with pre-curing process showed a compressive strength value of 18~48 % higher than that of specimen made with no precuring process. In this study, by using a complex activator and a pre-curing process. the maximum compressive strength of lightweight geopolymer was obtained as 40 MPa (The specimen was aged for 3 days and had density of 1.83 g/cm 3 ), which is comparable to cement concrete. By analyzing the crystal phase and microstructure of geopolymers obtained in this study using by XRD and SEM, respectively, it was confirmed that the flower-bud-like zeolite crystal was homogeneously distributed on the surface of the C-S-H gel (sodium silicate hydrate gel) in the geopolymer.
참고문헌 (30)
- A. O. Pudon, "The action of alkali on blast-furnace slag", J. Soc. Che. Ind., 59, pp.191~ (1940)
- J. Davidovits, "Geopolymers : Inorganic polymeric new materials", J. Therm. Analysis, 37, pp.1633~ (1991)
- J. -H. Lee, "An experimental study on the properties of concrete using bottom ash according to watercement ratio", Kor. Inst. Bldg. Const, 2, pp.57~ (2002)
- D. -G. Kim, "Effects of water-cement ratio on the freeze thaw resistance of fly ash concrete", Kor. Inst. Bldg. Const., 22, pp.211~ (2010)
- U. Rattanasak, "Influence of NaOH solution on the synthesis of fly ash geopolymer", Min’l Eng., 22, pp.1073~ (2009)
- C. Tippayasam, "Geopolymer development by powders of metakaolin and wastes in thailand", Adv. Sci. Tech., 69, pp.63~ (2010)
- Q. Zhao, "Novel geopolymer based composites with enhanced ductility", J. Mater. Sci., 42, pp.3131~ (2007)
- S. Kumar, "Mechanical activation of fly ahs: Effect on reaction, structure and properties of resulting geopolymer", Cer. Int., 37, pp.533~ (2011)
- E. Kamseu, "Enhanced thermal stability in K2O-metakaolin-based geopolymer concretes by Al2O3 and SiO2 fillers addition", J. Mater. Sci., 45, pp.1715~ (2010)
- W. Rickard, "Performance of fibre reinforced, low density metakaolin geopolymers under simulated fire conditions", App. Clay Sci., 73, pp.71~ (2012)
- K.B. Han, "Current state of lightweight aggregate concrete and future perspective for artificial lightweight aggregate production", Kor. Const. Safety Association, 33, pp.34~ (2005)
- Z. Zhang, "Geopolymer foam concrete: An emerging material for sustainable construction", Const. Bldg. Mat., 56, pp.113~ (2014)
- V. Medri, "The influence of process parameters on in situ inorganic foaming of alkalibonded SiC based foams", Cer. Int., 38, pp.3351~ (2012)
- V. Medri, "Effect of metallic Si addition on polymerization degree of in situ foamed alkali-aluminosilicates", Cer. Int., 39, pp.7657~ (2013)
- A. D. Hounsi, "How does Na, K alkali metal concentration change the early age structural characteristic of kaolinbased geopolymers", Cer. Int., 40, pp.8953~ (2014)
- P. Duxon, "Geopolymer technology : the current state of the art", J. Mater. Sci., 42, pp.2917~ (2007)
- P. Chindaprasirt, "Comparative study on the characteristics of fly ash and bottom ash geopolymers", Waste Mngt, 29, pp.539~ (2009)
- 류금성, "플라이애쉬 基盤 알칼리 活性 모르타르의 力學的 特性 및 微細構造 分析", 자원리싸이클링, 21(3), pp.28~38 (2012), 한국자원리싸이클링학회
- J. G. S. V. Jaarsveld, "Effect of the alkali metal activator on the properties of fly ash-based geopolymers", Ind. Eng. Chem. Res., 38, pp.3932~ (1999)
- T. Bakharev, "Geopolymeric materials prepared using Class F fly ash and elevated temperature curing", Cem. Conc. Res., 35, pp.1224~ (2005)
- Z. Aly, "Aqueous leachability of metakaolin-based geopolymers with mole ratios of Si", Al = 1.5-4, 2008, pp.378, 172~
- L. Weng, "Dissolution processes hydrolysis and condensation reactions during geopolymer synthesis:part I-low Si", Al ratio systems, 2007, pp.42, 2997~
- P. Rovnanik, "Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer", Const. Bldg. Mater., 24, pp.1176~ (2010)
- S. Delair, "Durability of inorganic foam in solution: The role of alkali elements in the geopolymer network", Corr. Sci., 59, pp.213~ (2012)
- 김진태, "알루미노 실리케이트계 지오폴리머의 압축강도에 미치는 알카리 활성화제의 영향", 한국세라믹학회지, 47(3), pp.216~222 (2010), 한국세라믹학회
- "Concrete Standard Specification of Korea", Ministry of Land, Infrastructure and Transport, ~ (2016)
- S. V. Joshi, "Role of alkaline activator in development of eco-friendly fly ash based geo polymer concrete", Int. J. Evmnt. Sci. Dev., 3, pp.417~ (2012)
- H. Xu, "The geopolymerisation of alumino-silicate minerals", Int. J. Min’l Proc., 59, pp.247~ (2000)
- J. T. Gourley, , Materials 2003 Conference:Adap. Mater. Modern Soc. (2003)
- A. Shoumkova, "Zeolites formation by hydrothermal alkali activation of coal fly ash from thermal power station ‘Maritsa 3’", Bulgaria, Fuel, 103, pp.533~ (2013)