Entrance and run angle variations of hull form preserving the prismatic coefficient
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
There are several methods of hull form variation that can be used in initial ship design, such as offset variation, line variation, and hull form variable variation. Hull form variations are typically done manually, and different results can be obtained according to the designer's know-how. This study proposes a conversion method that uses the Free-Form Deformation method to vary the entrance angle and run angle among the variables that are capable of converting hull form. The Free-Form Deformation is a method for transforming shapes. The variation using Free-Form Deformation method has the advantage of allowing for smooth conversion of the overall shape of the object to be varied, so the local variation is smoothly controlled when a designer manually transforms. However, if the Free-Form Deformation method is used, the varied entrance angle and run angle of the bow and stern will be changed, as will the prismatic coefficient, which is a constraint. Therefore, to obtain the same prismatic coefficient from before the variation, a method of correcting the prismatic coefficient converted 1-CP variation while maintaining the entrance angle and run angle was proposed, and the result was verified. The proposed method can shorten the time needed to generate various hull form data to identify the optimal hull form. It will also help strengthen the competitiveness of small and medium-sized shipbuilders who lack hull form variation technology, as they can use the proposed method to obtain an optimal hull form.
Abstract
There are several methods of hull form variation that can be used in initial ship design, such as offset variation, line variation, and hull form variable variation. Hull form variations are typically done manually, and different results can be obtained according to the designer's know-how. This study proposes a conversion method that uses the Free-Form Deformation method to vary the entrance angle and run angle among the variables that are capable of converting hull form. The Free-Form Deformation is a method for transforming shapes. The variation using Free-Form Deformation method has the advantage of allowing for smooth conversion of the overall shape of the object to be varied, so the local variation is smoothly controlled when a designer manually transforms. However, if the Free-Form Deformation method is used, the varied entrance angle and run angle of the bow and stern will be changed, as will the prismatic coefficient, which is a constraint. Therefore, to obtain the same prismatic coefficient from before the variation, a method of correcting the prismatic coefficient converted 1-CP variation while maintaining the entrance angle and run angle was proposed, and the result was verified. The proposed method can shorten the time needed to generate various hull form data to identify the optimal hull form. It will also help strengthen the competitiveness of small and medium-sized shipbuilders who lack hull form variation technology, as they can use the proposed method to obtain an optimal hull form.
참고문헌 (21)
- 최희종, "최소 조파저항을 가지는 컨테이너선의 선형최적화 기법에 대한 연구", 대한조선학회 논문집, 40(4), pp.2~15 (2003), 대한조선학회
- Creutz, G., "Curve and Surface Design from Form Parameters by Means of BSplines", pp.1977
- Harries, S., "Parametric Design and Hydrodynamic Optimization of Ship Hull Forms", Institut fuer Schiffs-und Meerestechnik, Technische Universitaet Berlin, Mensch & Buch Verlag, ~ (1998)
- Kim, H. C., "Parametric Design of Ship Hull Forms with a Complex Multiple Domain Surface Topology", pp.2004
- 김현철, "체적 밸런스 선형변환방법에 대한 연구", 한국해양공학회지, 27(2), pp.1~7 (2013), 한국해양공학회
- 김태훈, "1-Cp법을 이용한 선형최적화개발에 대한 연구", 한국기계기술학회지, 19(1), pp.71~76 (2017), 한국기계기술학회[DOI]
- Kim, H. J., "Hull form generation of minimum wave resistance by a nonlinear optimization method", J. Soc. Nav. Archit. Korea, 37, pp.11~18 (2000)
- 김유철, "선형변수 및 모형시험결과 데이터베이스를 활용한 저속비대선의 잉여저항계수 추정", 대한조선학회 논문집, 56(5), pp.447~456 (2019), 대한조선학회[DOI]
- Kim, H. C., "Hull form representation using a hybrid curve approximation", J. Soc. Nav. Archit. Korea, 35, pp.118~119 (1998)
- Lackenby, H., "On the systematic geometrical variation of ship forms", Br. Shipbuild. Res. Assoc, pp.289~296 (1950)
- 이연승, "Form Parameter Design을 이용한 선형최적화", 대한조선학회 논문집, 46(6), pp.562~568 (2009), 대한조선학회
- N. E. Markov, "Hull Form Optimization by Shift and Deformation of Ship Sections", Journal of Ship Research, 45(03), pp.197~204 (2001), The Society of Naval Architects and Marine Engineers[DOI]
- Masuda, S., "Experimental verification of optimized hull form based on rankine source method", J. Sh. Res. Kansai Soc. Nav. Archit, 236, pp.27~33 (2001)
- Jong-Ho Nam, "A curve based hull form variation with geometric constraints of area and centroid", Ocean Engineering, 133, pp.1~8 (2017), Elsevier BV[DOI]
- Neu, W. L., "A prototype tool for multidisciplinary design optimization of ships", Ninth Congr. Int. Marit. Assoc. Mediterr (2000)
- 박창규, "선형변환을 적용한 선박 최적설계 기법에 관한 연구", 한국기계기술학회지, 20(2), pp.238~245 (2018), 한국기계기술학회[DOI]
- 박성우, "다중 파라메트릭 변환곡선 기반 선수 선형 변환기법 연구", 대한조선학회 논문집, 59(2), pp.96~108 (2022), 대한조선학회[DOI]
- Roh, M. Il, "Computational ship design" (2017)
- Sederberg, T. W., "Free-form deformation of solid geometric models", Proc. 13th Annu. Conf. Comput. Graph. Interact. Tech. SIGGRAPH 1986, 20, pp.151~160 (1986)
- 최희종, "최적선형개발에 대한 기초연구", 한국해양공학회지, 18(3), pp.32~39 (2004), 한국해양공학회
- 유진원, "Bow hull-form optimization in waves of a 66,000 DWT bulk carrier", International Journal of Naval Architecture and Ocean Engineering, 9(5), pp.499~508 (2017), 대한조선학회