불소 적용 후 교정용 브라켓 접착제 종류에 따른 불소 재흡수성과표면 변화에 관한 연구
Effect of Fluoride Recharging on Fluoride Release and Surface Properties of Orthodontic Bracket Adhesives
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
불소 적용 후 교정용 브라켓 접착제 종류에 따른 불소의재흡수성과 표면의 변화를 비교 평가하고자 하였다. 불소가방출되지 않은 복합레진 Transbond XT®, 불소 방출성 복합레진 Blugloo®와 LightBond®, 레진강화형 글라스 아이오노머 Rely XTM Luting 2®, 재래형 글라스 아이오노머 Fuji I®를 사용하였다. 시편에서 방출되는 불소 방출량을 측정하였고, 불소 재흡수 능력을 비교하기 위해서 시편에 3가지의불소 제품(APF gel, Tooth Mousse Plus®, Fluor Protector) 을 도포하였으며, 불소함유 치약으로 잇솔질을 하여 불소방출량 변화를 측정하였고, 표면조도 측정기와 FE-SEM을이용하여 시편의 표면 조도 및 변화를 비교 평가하였다. Rely XTM Luting 2®와 Fuji I®에서는 다른 불소 제품인Tooth Mousse Plus®, Fluor Protector뿐만 아니라 불소함유치약으로 잇솔질한 후에도 불소의 재흡수량을 관찰할 수 있었다. Tooth Mousse Plus®를 도포한 후에는 Transbond XT®를 제외하고 표면 조도 값이 유의하게 증가하였으며, 모든 교정용 접착제에서 부분적인 미세 필러 입자의 탈락을보였다. Fluor Protector를 도포한 후에는 Transbond XT®, Rely XTM Luting 2®를 제외하고 표면 조도 값이 유의하게증가하였으며, 모든 교정용 접착제의 표면에 막을 형성하여기포가 생긴 부분을 제외하고 매끄러운 양상을 나타내었다. 모든 교정용 접착제에 APF gel을 도포했을 때는 표면 조도값이 유의하게 크게 증가하였다. 이상의 결과를 종합해 볼때, 교정용 브라켓을 접착할 때 치아우식 예방 효과를 도모하기 위한 불소 방출량을 고려한다면 Rely XTM Luting 2® 와 Fuji I®가 적극 추천되며, 불소 제품으로는 Tooth Mousse Plus®, Fluor Protector가 APF gel보다 우수한 것으로 나타났고, 불소가 함유된 치약으로 잇솔질을 하였을 때도 치아우식을 예방할 수 있을 것으로 생각된다.
Abstract
The aim of this study was to compare fluoride release and surface changes according to different orthodontic bracket adhesives the application of fluoride products. We used non-fluoridated composite resin Transbond fluoridated composite resins Blugloo and LightBond, resin-modified glass ionomer Rely XTM Luting 2, and conventional glass ionomer Fuji IⓇ. Fluoride release of five orthodontic bracket adhesives and fluoride release ability after application of three fluoride products (1.23% acidulated phosphate fluoride gel, Tooth Mousse PlusⓇ, Fluor Protector, and a toothbrush with sodium fluoride-containing toothpaste) were measured using a fluoride electrode that was connected to an ion analyzer. After 4 weeks of fluoride application, the surface roughness and surface morphology were examined using a surface roughness tester and field emission scanning electron microscopy. The amounts of fluoride release were observed not only on application of Tooth Mousse PlusⓇ and Fluor Protector on resin-modified glass ionomer Rely XTM Luting 2 and Fuji IⓇ, but also during tooth brushing using fluoride-containing toothpaste. After application of Tooth Mousse PlusⓇ, except Transbond XT, the surface roughness increased, and all orthodontic adhesives showed a partial drop of micro-particle filler. On application of 1.23% acidulated phosphate fluoride gel on all orthodontic bracket adhesives, their surface roughness increased. To bond the orthodontic bracket, resin-modified glass ionomer Rely XTM Luting 2 and Fuji IⓇ adhesives are highly recommended if the amount of fluoride release is considered to confer a preventative effect on dental caries, and among the fluoride products, Tooth Mousse PlusⓇ and Fluor Protector are better than 1.23% acidulated phosphate fluoride gel, and these are expected to prevent dental caries even during tooth brushing with fluoride-containing toothpaste.
참고문헌 (35)
- Paula Passalini, "Preventive effect of fluoridated orthodontic resins subjected to high cariogenic challenges", Brazilian Dental Journal, 21(3), pp.211~215 (2010), FapUNIFESP (SciELO)[DOI]
- Bernd W. Zimmer, "Assessing patient-specific decalcification risk in fixed orthodontic treatment and its impact on prophylactic procedures", American Journal of Orthodontics and Dentofacial Orthopedics, 126(3), pp.318~324 (2004), Elsevier BV[DOI]
- Vittorio Cacciafesta, "In-vitro fluoride release rates from 9 orthodontic bonding adhesives", American Journal of Orthodontics and Dentofacial Orthopedics, 132(5), pp.656~662 (2007), Elsevier BV[DOI]
- Arruda AO, "Contemporary approach to dental caries", pp.313~333 (2012), InTech
- 정문진, "Comparison of Anticariogenic Effect after Applying Fluoride Varnish on Sound and Artificial Caries Enamel", 치위생과학회지, 13(4), pp.461~470 (2013), 한국치위생과학회
- 김수련, "일개 대학 재학생의 치아우식예방 불소이용법에 관한 경험과 인식", 치위생과학회지, 14(4), pp.580~588 (2014), 한국치위생과학회
- H. Slutzky, "The effects of in vitro fluoride mouth rinse on the antibacterial properties of orthodontic cements", Orthodontics & Craniofacial Research, 17(3), pp.150~157 (2014), Wiley[DOI]
- Annette Wiegand, "Review on fluoride-releasing restorative materials—Fluoride release and uptake characteristics, antibacterial activity and influence on caries formation", Dental Materials, 23(3), pp.343~362 (2007), Elsevier BV[DOI]
- 김명은, "불소 함유 교정용 레진 시멘트의 불소 유리 및 법랑질 탈회 저항성에 대한 효과", 치위생과학회지, 11(5), pp.445~453 (2011), 한국치위생과학회
- C.K. Chung, "Fluoride release and cariostatic ability of a compomer and a resin-modified glass ionomer cement used for orthodontic bonding", Journal of Dentistry, 26(5-6), pp.533~538 (1998), Elsevier BV[DOI]
- V.L Monteith, "Fluoride release from orthodontic bonding agents", Journal of Dentistry, 27(1), pp.53~61 (1999), Elsevier BV[DOI]
- Li J, "Effect of flexural strength of orthodontic resin cement on bond strength of metal brackets to enamel surfaces", Eur J Orthodont, 33, pp.167~173 (2011)[DOI]
- Wailan D. Chan, "Fluoride release from dental cements and composites: A mechanistic study", Dental Materials, 22(4), pp.366~373 (2006), Elsevier BV[DOI]
- Anna Iliadi, "Effect of intraoral aging on the setting status of resin composite and glass ionomer orthodontic adhesives", American Journal of Orthodontics and Dentofacial Orthopedics, 145(4), pp.425~433 (2014), Elsevier BV[DOI]
- Evangelia Chatzistavrou, "Fluoride release from an orthodontic glass ionomer adhesive in vitro and enamel fluoride uptake in vivo", American Journal of Orthodontics and Dentofacial Orthopedics, 137(4), pp.458.e1~458.e8 (2010), Elsevier BV[DOI]
- ShalinG Shah, "Efficacy of silver diamine fluoride as a topical fluoride agent compared to fluoride varnish and acidulated phosphate fluoride gel: An in vivo study", Journal of Pediatric Dentistry, 2(1), pp.5~ (2014), Medknow[DOI]
- A. R. Prabhakar, "Comparative evaluation in vitro of caries inhibition potential and microtensile bond strength of two fluoride releasing adhesive systems", European Archives of Paediatric Dentistry, 15(6), pp.385~391 (2014), Springer Nature[DOI]
- Huda M Al-Kawari, "Effect of different preventive agents on bracket shear bond strength: in vitro study", BMC Oral Health, 14(1) (2014), Springer Nature[DOI]
- Padmini Somasundaram, "Protective potential of casein phosphopeptide amorphous calcium phosphate containing paste on enamel surfaces", Journal of Conservative Dentistry, 16(2), pp.152~ (2013), Medknow[DOI]
- Hatibović-Kofman S, "Fluoride release from glass ionomer cement in vivo and in vitro", Swed Dent J, 15, pp.253~258 (1991)
- Bum-Soon Lim, "Effects of periodic fluoride treatment on fluoride ion release from fresh orthodontic adhesives", Journal of Dentistry, 39(11), pp.788~794 (2011), Elsevier BV[DOI]
- S.R. Grobler, "A comparison of fluoride release from various dental materials", Journal of Dentistry, 26(3), pp.259~265 (1998), Elsevier BV[DOI]
- S Mazzaoui, "Fluoride release from glass ionomer cements and resin composites coated with a dentin adhesive", Dental Materials, 16(3), pp.166~171 (2000), Elsevier BV[DOI]
- W. Gao, "Fluoride release", uptake of conventional and resin-modified glass ionomers, and compomers, 2001, pp.29(4), 301~306[DOI]
- Sug-Joon Ahn, "Effects of different fluoride recharging protocols on fluoride ion release from various orthodontic adhesives", Journal of Dentistry, 39(3), pp.196~201 (2011), Elsevier BV[DOI]
- Mark L. Underwood, "Clinical evaluation of a fluoride-exchanging resin as an orthodontic adhesive", American Journal of Orthodontics and Dentofacial Orthopedics, 96(2), pp.93~99 (1989), Elsevier BV[DOI]
- Luc M. Trimpeneers, "Long-term fluoride release of some orthodontic bonding resins", Dental Materials, 14(2), pp.142~149 (1998), Elsevier BV[DOI]
- Warren J Cohen, "Long-term in vitro fluoride release and rerelease from orthodontic bonding materials containing fluoride", American Journal of Orthodontics and Dentofacial Orthopedics, 124(5), pp.571~576 (2003), Elsevier BV[DOI]
- G.R Caves, "Fluoride release from orthodontic band cements—a comparison of two in vitro models", Journal of Dentistry, 31(1), pp.19~24 (2003), Elsevier BV[DOI]
- Xiaoming Xu, "Formulation and characterization of a novel fluoride-releasing dental composite", Dental Materials, 22(11), pp.1014~1023 (2006), Elsevier BV[DOI]
- Hanan Al Zraikat, "The incorporation of casein phosphopeptide–amorphous calcium phosphate into a glass ionomer cement", Dental Materials, 27(3), pp.235~243 (2011), Elsevier BV[DOI]
- L.M.A. Tenuta, "Mechanism of Fluoride Dentifrice Effect on Enamel Demineralization", Caries Research, 43(4), pp.278~285 (2009), S. Karger AG[DOI]
- Kukiattrakoon B, "Optimal acidulated phosphate fluoride gel etching time for surface treatment of feldspathic porcelain: on shear bond strength to resin composite", Eur J Dent, 6, pp.63~69 (2012)
- E. Coutinho, "Bonding effectiveness and interfacial characterization of a nano-filled resin-modified glass-ionomer", Dental Materials, 25(11), pp.1347~1357 (2009), Elsevier BV[DOI]
- Yip HK, "Surface roughness and weight loss of esthetic restorative materials related to fluoride release and uptake", J Clin Pediatr Dent, 23, pp.321~326 (1999)
