Enhancing Performance of 1-aminopyrene Light-Emitting Diodes via Hybridization with ZnO Quantum Dots
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, a pyrene-core single molecule with amino (-NH2) functional group material was hybridized using ZnO quantum dots (QDs). The suppressed performance of the 1-aminopyrene (1-PyNH2) single molecule as an emissive layer (EML) in light-emittingdiodes (LEDs) was exploited by adopting the ZnO@1-PyNH2 core–shell structure. Unlike pristine 1-PyNH2 molecules, the ZnO@1- PyNH2 hybrid QDs formed energy proximity levels that enabled charge transfer. This result can be interpreted as an improvement insurface roughness. The uniform and homogeneous EML alleviates dark-spot degradation. Moreover, LEDs with the ITO/PEDOT:PSS/TFB/EML/TPBi/LiF/Al configuration were fabricated to evaluate the performance of two emissive materials, where pristine-1-PyNH2molecules and ZnO@1-PyNH2 QDs were used as the EML materials to verify the improvement in electrical characteristics. The ZnO@1-PyNH2 LEDs exhibited blue luminescence at 443 nm (FWHM = 49 nm), with a turn-on voltage of 4 V, maximum luminance of 1500 cd/m2 , maximum luminous efficiency of 0.66 cd/A, and power efficiency of 0.41 lm/W.
Abstract
In this study, a pyrene-core single molecule with amino (-NH2) functional group material was hybridized using ZnO quantum dots (QDs). The suppressed performance of the 1-aminopyrene (1-PyNH2) single molecule as an emissive layer (EML) in light-emittingdiodes (LEDs) was exploited by adopting the ZnO@1-PyNH2 core–shell structure. Unlike pristine 1-PyNH2 molecules, the ZnO@1- PyNH2 hybrid QDs formed energy proximity levels that enabled charge transfer. This result can be interpreted as an improvement insurface roughness. The uniform and homogeneous EML alleviates dark-spot degradation. Moreover, LEDs with the ITO/PEDOT:PSS/TFB/EML/TPBi/LiF/Al configuration were fabricated to evaluate the performance of two emissive materials, where pristine-1-PyNH2molecules and ZnO@1-PyNH2 QDs were used as the EML materials to verify the improvement in electrical characteristics. The ZnO@1-PyNH2 LEDs exhibited blue luminescence at 443 nm (FWHM = 49 nm), with a turn-on voltage of 4 V, maximum luminance of 1500 cd/m2 , maximum luminous efficiency of 0.66 cd/A, and power efficiency of 0.41 lm/W.
참고문헌 (15)
- C. W. Tang, "Organic electroluminescent diodes", Appl. Phys. Lett, 51(12), pp.913~915 (1987)
- J. Kang, "Improvement in color purity and lifetime of blue PHOLEDs using a homoleptic iridium(III)complex with fluorinated dibenzofuranyl-imidazole ligand", Dyes Pigm, 190, pp.109334~ (2021)
- S. O. Jeon, "High-Efficiency Deep-Blue-Phosphorescent Organic Light-Emitting Diodes Using a Phosphine Oxide and a Phosphine Sulfide High-Triplet-Energy Host Material with Bipolar ChargeTransport Properties", Adv.Mater, 22(16), pp.1872~1876 (2010)
- Q. Zhang, "Efficient blue organic light-emitting diodes employing thermally activated delayed fluorescence", Nat. Photonics, 8(4), pp.326~332 (2014)
- B. S. Kim, "Engineering of mixed host for high external quantum efficiency above 25% in green thermally activated delayed fluorescence device", Adv. Funct. Mater, 24(25), pp.3970~3977 (2014)
- S. K. Kim, "New deep-blue emitting materials based on fully substituted ethylene derivatives", J. Mater. Chem, 17(44), pp.4670~4678 (2007)
- H. Jung, "High efficiency and long lifetime of a fluorescent blue-light emitter made of a pyrene core and optimized side groups", ACS Appl. Mater. Interfaces, 10(36), pp.30022~30028 (2018)
- H. Aziz, "Degradation phenomena in small-molecule organic light-emitting devices", Chem. Mater, 16(23), pp.4522~4532 (2004)
- H. Bolink, "Efficient blue emitting organic light emitting diodes based on fluorescent solution processable cyclic phosphazenes", Org. Elect, 9(2), pp.155~163 (2008)
- J. McElvain, "Formation and growth of black spots in organic light-emitting diodes", J. Appl. Phys, 80(10), pp.6002~6007 (1996)
- V. N. Savvate’ev, "Degradation of nonencapsulated polymer-based light-emitting diodes : Noise and morphology", Appl. Phys. Lett, 71(23), pp.3344~3346 (1997)
- L. M. Do, "In situ investigation of degradation in polymeric electroluminescent devices using time-resolved confocal laser scanning microscope", Appl. Phys. Lett, 70(25), pp.3470~3472 (1997)
- H. Aziz, "Degradation processes at the cathode", organic interface in organic light emitting devices with Mg : Ag cathodes, 1998, pp.72(21), 2642~2644
- L. S. Liao, "Bubble formation in organic light-emitting diodes", J. Appl. Phys, 88(5), pp.2386~2390 (2000)
- M. Schaer, "Water vapor and oxygen degradation mechanisms in organic light emitting diodes", Adv. Funct. Mater, 11(2), pp.116~121 (2001)