Dynamic characteristics between waves and a floating cylindrical body connected to a tension-leg mooring cable placed in a simulated offshore environment
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Given the rapid progress made in understanding the dynamics of an offshore floating body in an ocean environment, the present study aimed to simulate ocean waves in a small-sized wave flume and to observe the motion of a cylindrical floating body placed in an offshore environment. To generate regular ocean waves in a wave flume, we combined a wave generator and a wave absorber. In addition, to precisely visualise the oscillation of the body, a set of light-emitting diode illuminators and a high-speed charge-coupled device camera were installed in the flume. This study also focuses on the spectral analysis of the movement of the floating body. The wave generator and absorbers worked well to simulate stable regular waves. In addition, the simulated waves agreed well with the plane waves predicted by shallow-water theory. As the period of the oncoming waves changed, the movement of the floating body was substantially different when tethered to a tension-leg mooring cable. In particular, when connected to the tension-leg mooring cable, the natural frequency of the floating body appeared suddenly at 0.391 Hz as the wave period increased.
Abstract
Given the rapid progress made in understanding the dynamics of an offshore floating body in an ocean environment, the present study aimed to simulate ocean waves in a small-sized wave flume and to observe the motion of a cylindrical floating body placed in an offshore environment. To generate regular ocean waves in a wave flume, we combined a wave generator and a wave absorber. In addition, to precisely visualise the oscillation of the body, a set of light-emitting diode illuminators and a high-speed charge-coupled device camera were installed in the flume. This study also focuses on the spectral analysis of the movement of the floating body. The wave generator and absorbers worked well to simulate stable regular waves. In addition, the simulated waves agreed well with the plane waves predicted by shallow-water theory. As the period of the oncoming waves changed, the movement of the floating body was substantially different when tethered to a tension-leg mooring cable. In particular, when connected to the tension-leg mooring cable, the natural frequency of the floating body appeared suddenly at 0.391 Hz as the wave period increased.
참고문헌 (18)
- Bascom, W., "The relationship between sand size and beach face slope", Trans. Am. Geophys. Union, 32(6), pp.866~894 (1951)
- Dalrymple, R. A., "The spiral wavemaker for littoral drift studies", Proc. 13th Conf. Coastal Eng (1972)
- Dong, C. M., "On a 2-D numerical wave tank in viscous fluid", International Offshore and Polar Engineering Conference Stavanger, pp.17~22 (2001)
- Wave-Height Prediction for Wave Generators in Shallow Water, "Galvin, C. J.", Coastal Engineering Research Center, ~ (1964)
- Goutsias, J., "Morphological representation of discrete and binary images", IEEE Trans. Signal Process, 39(6), pp.1369~1379 (1991)
- Havelock, T. H., "Forced surface wave on water", Philos. Mag, 8, pp.569~576 (1929)
- He, L., "Fast connected-component labeling", Pattern Recognit, 42(9), pp.1977~1987 (2009)
- He, F., "Hydrodynamic performance of a rectangular floating breakwater with and without pneumatic chambers: an experimental study", Ocean. Eng, 51, pp.16~27 (2012)
- Huang, J., "Comparison of wave making characteristics among some types of wave makers", J. Kansai Soc. Nav. Archit, 209, pp.65~72 (1988)
- Johannes, S., "Second-order wave maker theory using forcefeedback control (Part II : an experimental verification of regular wave generation)", Ocean. Eng, 36, pp.549~555 (2009)
- Manohara, M., "Connected component labeling of binary images on a mesh connected massively parallel processor", Comput. Vis. Graph. Image Process, 45(2), pp.133~149 (1989)
- Newton, D. E., "World Energy Crisis: a Reference Handbook" (2012), ABCCLIO, LLC
- Pelc, R., "Renewable energy from the ocean", Mar. Policy, 26(6), pp.471~479 (2002)
- Rahman, M. A., "Numerical modeling of dynamic responses and mooring forces", Coast. Eng, 53(10), pp.799~815 (2006)
- Robert, T., "Design curves for hinged wavemakers", Am. Soc. Civ. Eng, 107(5), pp.533~552 (1981)
- Sannasiraj, S. A., "Mooring forces and motion responses of pontoon-type floating breakwaters", Ocean Eng, 25(1), pp.27~48 (1988)
- Vincenzini, P., "Structural control issues in new generation offshore wind energy plants", Adv. Sci. Technol, 83, pp.167~176 (2012)
- Yamamoto, T., "Moored floating breakwater response to regular and irregular waves", Appl. Ocean Res, 3(1), pp.27~36 (1981)